Professional Documents
Culture Documents
Fashion Master
(steam ironing system)
B 1312
B 1826
B 1847
2
Contents
3
Contents
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Automatic rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cleaning the casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cleaning the sole plate of the iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cleaning the ironing table cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Replacing the ironing table cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Cleaning the water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Non-stick sole plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Ironing table cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Steamer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cleaning products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Descaling tablets for the Fashion Master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
E-cloth (microfibre cloth) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4
Warning and Safety instructions
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future owner.
Correct application
~ The appliance must be used only for ironing textiles which are
suitable for ironing according to the care label.
5
Warning and Safety instructions
~ Make sure that children under 14 years of age cannot access the
steam hose or the mains connection cable either during use or
whilst the appliance is cooling down.
Technical safety
~ Check the iron for damage. The iron must not be used if it has
been dropped, if there is any visible damage or if it is leaking.
6
Warning and Safety instructions
7
Warning and Safety instructions
Correct use
8
Warning and Safety instructions
~ Always place the iron with the steam function switched off on the
iron resting surface so that the sole plate does not protrude over the
edges.
Placing it otherwise could be a fire hazard.
~ Take care not to burn yourself. If the iron remains on the resting
surface for any length of time, the surface will become hot. Avoid
direct contact with it. Only touch the handle.
~ Do not pull on the cable to remove the plug. Pull on the plug.
~ Do not touch the electrical connection cable or the steam hose
with the sole plate of the heated iron. This could result in damage.
9
Warning and Safety instructions
~ Do not plug any objects into any of the apertures on the steam
ironing system. If an aperture is blocked, do not use the system.
Using accessories
10
Guide to the appliance
11
Guide to the appliance
12
Moving the Fashion Master
The appliance is fitted with two rollers,
so it can be pulled or pushed across an
even surface when folded up.
13
Assembling
^ Take the Fashion Master to the place The ironing table is held independently
where it is to be set up. in this position.
^ Pull upwards on the release ^ Pull the ironing table upwards with
mechanism with one hand. Hold the both hands into a horizontal position
tower tightly by the handle with the until you hear a click.
other hand.
The locking mechanism on the tower
will be released and the X-frame will
fold down at the same time.
14
Assembling
15
Assembling
16
Connection
The Fashion Master system is supplied
for connection to a 220 - 240 V, 50 Hz
mains electricity supply and is fitted
with a moulded plug.
^ Insert the plug in a wall socket. ^ Take out the iron and the steam hose
holder.
17
Connection
^ Close the storage compartment lid ^ Connect the iron by plugging the
again. steam hose into the steam
connection.
Pull back the sliding mechanism on
the steam hose plug and release it
when it is plugged in.
18
Connection
19
Before using for the first time
It is helpful to get to know the Water hardness
FashionMaster before using it for the
To ensure problem-free functioning and
first time so that you will be able to
so that the descaling reminder appears
make use of all the functions.
at the right time, it is important to adjust
^ Remove the packaging (e.g. the the appliance to the local water
protective film from the tower, etc). hardness level. The water hardness
level indicates how much calcium is
When using for the first time, you might
dissolved in the water. The higher the
notice a slight odour during the
calcium content, the harder the water,
heating-up phase. This will dissipate
and the harder the water, the more
with further use.
often the appliance will need to be
During operation pumping, boiling and descaled.
knocking noises may be heard.
Your local water board will be able to
These are normal noises which occur
tell you the hardness level of your
during operation.
water. This information can often be
found on the internet on the home page
of the relevant water board.
Set the water hardness according to
the table. The water hardness set is
shown by the flash frequency of the k
indicator light.
20
Before using for the first time
If you cannot find out the water If your water hardness is different from
hardness level, you can use the test this, you must adjust it to the
strip provided: corresponding value.
Where the water hardness fluctuates
e.g. between 6.7 - 9.0 mmol/l (37 - 50
°dH), always programme it to the higher
value (9.0 mmol/l / 50 °dH in this
example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
^ Dip the strip in your drinking water for
approximately a second, then shake
off any excess water. The result will mmol or °dH
be evident after about a minute.
Set the water hardness according to
the table. The water hardness set is
shown by the flash frequency of the k
indicator light.
21
Before using for the first time
22
Switching on
23
Switching on
If you refill and replace the water
container as soon as the indicator light
k lights up, there is no delay. The *
indicator light indicates readiness
immediately.
While the k indicator light is on, the
steam system is not active.
The iron remains functional.
Energy-saving tip: You can save energy
by ironing without steam by removing
the water container, so that the steam
generator is not heated.
^ Turn the screw cap on the back of Empty the water container if the system
the water container anti-clockwise is not going to be used for a long
and lift it off. period.
24
Switching on
Water quality
Do not use demineralised water
Use only fresh tap water.
(e.g. distilled) on its own to fill the
Filtered tap water may also be used. water container. This can cause the
appliance to malfunction.
For water hardness of more than
2.5 mmol/l / 14°dH you can use tap
Do not use water from a water
water mixed in 1:1 ratio with distilled
softener. This can cause the
water. This halves the water hardness.
appliance to malfunction.
Set the halved water hardness to the
corresponding flash frequency.
Do not use condensate, e.g. from
Example:
other appliances such as air
Tap water with 10.8 mmol/l (60°dH) in a
conditioning units, tumble dryers,
1:1 mixture with distilled water results in
etc, or rain water.
water hardness of 5.4 mmol/l (30°dH).
The corresponding flash frequency of
the k indicator light is 7 times, Do not use any additives, e.g.
according to the table (see "Setting the perfumes, ironing water, starch,
water hardness level"). carbonated water, etc.
25
Switching on
CoolDown function
If the iron is not moved for more than 3
minutes, the heating switches off.
After some time steam is no longer
available and the * indicator light goes
out.
The iron will start heating up again
automatically as soon as the iron is
moved.
The time taken for the steam to be
available again depends on the length
of time the heating was switched off.
When the appliance is ready and steam
is available, the * indicator light comes
on.
Auto-Off function
If the iron or steamer is not used for a
total of more than 14 minutes, the whole
appliance switches off automatically.
The system is switched back on again
by pressing the s button.
26
Switching on
ßß
+ ß
H Woollens/ Silks
Medium
temperature ßß
I Linen / Cottons
High
temperature ßßß
J Do not iron
27
Switching on
^ Use the temperature selector to set Tip: Sorting the laundry
the temperature required.
Sort your laundry according to heat
The indicator lights up yellow while the sensitivity for efficient ironing.
iron is heating up. When the set
Iron the most sensitive fabrics, such as
temperature is reached, the indicator
synthetics first, Then iron silk, wool,
light goes out. The iron is ready.
cotton and linen at increasing
Steam can be used in the temperature temperatures.
ranges between ßß and ßßß.
Please also observe the advice and
Please note that the steam must be
symbols on the care labels in your
ready * for steam ironing.
garments.
Steam readiness is indicated when the
* indicator light lights up on the control
panel.
28
Ironing
a Steam button *
b Sliding switch for constant steam
c Power output selection button m
a Steam button *
d Blow/suction button n
b Sliding switch for constant steam
c Suction button p
d Blow button o
29
Ironing
Ironing with steam Condensate can form in the steam hose
during pauses in ironing. This is
The burst of steam is controlled by the
expelled by operating the steam button.
* button.
To avoid wet spots on your laundry, do
The fan starts up when the * button is
not direct the first burst of steam after a
pressed.
pause onto the garment.
The fan will continue running for a short
while after using steam.
For short bursts of steam:
Ironing without steam
^ Press the * button briefly and
If you want to iron dry, you can save
release it again.
energy by removing the water container
For constant steam: so that the steam generator is not
heated.
^ Press the * button and at the same
time slide switch b backwards.
Now release the * button. Steam will
be continuously released.
^ To stop using steam continuously,
unlock the * button by sliding switch
b forwards again. Steam output will
stop.
30
Ironing
Ironing with the non-stick sole plate It also reduces or eliminates the
formation of shiny patches on dark
In the lower compartment there is a
textiles.
non-stick sole plate which simply clips
onto the iron. Always try it out on an unobtrusive part
of the fabric first.
,Danger of burning. The sole
plate becomes very hot when in use. Removing the non-stick sole plate
Avoid direct contact with it.
,Danger of burning. The sole
plate becomes very hot when in use.
Avoid direct contact with it.
31
Ironing
Memory function
The memory function saves the
last-used fan direction and power
setting.
32
Steamer
The steamer* can also be used with You can change between the iron
models B 1312 and B 1826 and the steamer at any time during
(*optional accessory). ironing without switching off the
system.
The steamer a facilitates the ironing of
hanging textiles, e.g. dresses and After switching between the iron and
jackets. steamer there is a pause before the
It is fitted with a removable brush steam is ready to ensure that the iron or
attachment b for raising and steamer is sufficiently heated up.
straightening the fibres.
The steamer is ready for use when the
The steamer is lighter than the iron and * indicator light on the tower control
also has no hot sole plate, eliminating panel lights up and signals that the
the risk of shiny patches due to steam is ready.
unintentional contact with the textiles.
The steamer can also be used when
the appliance is dismantled.
33
Steamer
34
Steamer
Brush attachment
The steamer comes with a brush
attachment which can be clipped onto
the head.
The steamer can be held directly on the
textile with the brush attached.
35
Switching off
Switch off the appliance.
^ Press the On/Off button s.
The yellow ring around the s button
goes out.
The last fan settings selected are saved
for the next time you switch on.
If you are putting the appliance away:
^ Disconnect the appliance from the
mains electricity supply.
36
Storage
^ Place the iron on the resting surface
to cool down.
Once the iron has cooled down you can
fold the Fashion Master away.
The ironing table must be put back in
the lowest working position in order to
fold the appliance away.
Ensure that the residual water container
is correctly inserted and clicked into
place and take care not to trap the
electrical connection cable in the
mechanism.
^ At the same time push the tower
handle downwards to lower the
ironing table into the lowest working
position.
37
Storage
38
Storage
^ Once the iron has cooled down on
the resting surface, stow the iron and
the steam hose holder in the upper
storage compartment
^ Stow the steamer (for B 1847) in the
lower storage compartment.
^ Disconnect the iron or steamer from Do not store the appliance in a room
the steam connection in the tower. where there is a risk of frost
Pull back the sliding mechanism on occurring. Frozen water can cause
the steam hose plug and withdraw damage to the water container,
the plug. Do not pull on the steam steam generator and steam hose.
hose.
Caution: the plug can still be warm
immediately after use.
A small amount of water can escape
from the steam hose.
39
Cleaning and care
Automatic rinse
The automatic rinse function clears the steam generator of
mineral deposits from the evaporated water.
After a water throughput of approx. 3 litres, the water from the
steam generator is drained off into the residual water
container when the Fashion Master is next switched on.
40
Cleaning and care
Rinsing process
The contents of the steam generator will drain off into the
residual water container.
Some steam will escape and trickling noises can be heard
during this process.
The 2 indicator light comes on.
Emptying the residual water container
41
Cleaning and care
Make sure that the metal contact discs at the top of the
residual water container are cleaned and dried properly.
These metal discs send a signal to the appliance when the
residual water container is full or if it is not in the
appliance. The discs will not convey these signals if they
are dirty or damp.
42
Cleaning and care
Automatic descaling
The appliance should be descaled regularly to ensure that it
functions correctly. The appliance has an automatic
descaling function to assist you.
Frequency and requirement for descaling is dependent upon
the water hardness level set. Descaling is required more
frequently with hard water than with soft water.
43
Cleaning and care
Descale advanced warning
When there are approx. 2 operating hours remaining before
the next descaling, the k indicator light begins to flash red.
The light will flash more rapidly as the time counts down, until
it stays on permanently.
Descaling can be started at any time whilst the red k
indicator light is flashing by pressing the j button.
If the k indicator light is permanently on, the remaining
operating hours have expired.
You can still finish your ironing, however, the appliance must
carry out descaling next time it is switched on, before any
more ironing is done.
44
Cleaning and care
45
Cleaning and care
Preparing for the descaling process
46
Cleaning and care
If the appliance is still hot from the last use, the l indicator
light comes on. The descaling process is automatically
resumed when the appliance has cooled down and the l
indicator light has gone out. The appliance can take up to
3 hours to cool down.
47
Cleaning and care
^ Insert the residual water container after a short interval
(approx. 20 seconds) so that it clicks into place.
The 2 indicator light will go out.
48
Cleaning and care
The descaling process starts
After about 10 minutes (the time it takes for the tablet to
dissolve), the descaling process begins. Water is pumped
into the steam generator at various times during the
descaling process and is drained away again into the
residual water container. Some steam will escape and
trickling noises can be heard during this process.
The indicator lights will alert you if you need to empty the
residual water container or fill the water container.
49
Cleaning and care
Finishing the descaling process
50
Cleaning and care
51
Cleaning and care
Cleaning the ironing table Replacing the ironing table
cover cover
If the ironing table cover is soiled, it can Do not use the appliance if the ironing
be removed for washing. table cover is damaged.
,Do not operate the appliance ,Do not operate the appliance
without an ironing table cover. without an ironing table cover.
52
Cleaning and care
53
Cleaning and care
^ Replace the water filter.
54
Optional accessories
Miele appliances are built to the highest Ironing table cover
standards to achieve the best possible
Miele ironing table covers are
results for as long as possible. To help
hard-wearing and highly absorbant.
you get the most out of your appliance
The separate needle felt under layer is
Miele also offers a comprehensive
steam-permeable and pleasantly
range of accessories and care
cushioned.
products.
Both can be used for any Miele Fashion
The following products are just a few
Master, regardless of model.
examples from our full range which is
available to order online at: – Basic ironing table cover
Colour: mottled grey
The basic ironing table cover consists
of 65% polyester and 35% cotton and
can be washed as necessary at 40 °C.
– Premium ironing table cover
or from Miele (see back cover for
contact details) or from your Miele This ironing table cover has particularly
dealer. good heat resistance and durability due
to a special finish.
Accessories Colour: anthracite
Non-stick sole plate The premium ironing table cover
consists of 100% cotton and can be
With the non-stick sole plate, you can washed as necessary at 40 °C.
generally iron appliqués, printed or
flocked textiles etc, without turning the Steamer
garment inside out. It also reduces or
eliminates the formation of shiny The steamer facilitates the smoothing of
patches on dark textiles. The non-stick hanging textiles, e.g. dresses and
sole plate can be used on the iron of jackets. It comes with a brush
any Miele Fashion Master, regardless of attachment for raising and straightening
model. the fibres.
The steamer can be used with any
Miele Fashion Master, regardless of
model.
55
Optional accessories
Cleaning products
The Miele CareCollection has products
which have been specially developed
to clean your appliance gently and
thoroughly.
56
Problem solving guide
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
57
Problem solving guide
58
Problem solving guide
59
Problem solving guide
60
Problem solving guide
61
Problem solving guide
62
Problem solving guide
63
Problem solving guide
64
Problem solving guide
65
Problem solving guide
66
Problem solving guide
67
After sales service
In the event of a fault that you cannot Guarantee
easily remedy, please contact
For information on the appliance
– your Miele Dealer guarantee specific to your country
please contact Miele. See back cover
or
for contact details.
– Miele (see back cover for contact
In the UK, your appliance is guaranteed
details).
for 2 years from the date of purchase.
However, you must activate your cover
Please note that telephone calls may
by calling 0845 365 6640 or registering
be monitored and recorded for
online at www.miele.co.uk.
training purposes (UK only).
68
Electrical connection
The appliance must not be connected
,All electrical work must be to the inverter of an autonomous power
carried out by a suitably qualified supply, e.g. a solar power system.
and competent person in When switching the appliance on, a
accordance with current local and surge in the power could trigger the
national safety regulations (BS 7671 safety cut-out mechanism. This could
in the UK). damage the electronic unit.
The appliance must not be used with
This appliance is supplied with a
so-called energy saving devices.
connection cable and moulded plug
These reduce the energy supply to the
(BS 1363) for connection to a
appliance which could then become
220 - 240 V mains supply.
too warm.
The appliance must only be operated
If mains connection cable may only be
with the voltage, frequency and fuse
replaced by an original Miele spare
rating shown on the data plate (located
part.
in the tower behind the water
container). Please ensure these match
the household mains supply.
We recommend connecting the
WARNING
appliance to the power supply via a
THIS APPLIANCE MUST BE
suitable plug and socket which must be
EARTHED
easily accessible for servicing and
maintenance work.
Do not connect the appliance to the
mains electricity supply by a
multi-socket adapter or an extension
lead.
These do not guarantee the required
safety of the appliance, (e.g. danger of
overheating).
For extra safety and protection we
recommend protecting the appliance
with a 30 mA residual current device
(RCD).
If the electrical connection cable is
faulty this must only be replaced by a
suitably qualified and competent
person.
69
Technical data
70
71
Alteration rights reserved/0913 M.-Nr. 09 370 092 / 00