Chain conveyors from Ottevanger Milling Engineers are sturdy and can convey difficult bulk materials over long distances at capacities up to 400 m3/h. They are fully enclosed and have geared drive units, wear plates, and overflow valves. They are available in various sizes from 220x430mm to 520x580mm with chain widths from 200mm to 500mm. Special executions include stainless steel or galvanized construction, weather protection, speed sensors, zone rated drives, intermediate outlets, and recirculation heads.
Chain conveyors from Ottevanger Milling Engineers are sturdy and can convey difficult bulk materials over long distances at capacities up to 400 m3/h. They are fully enclosed and have geared drive units, wear plates, and overflow valves. They are available in various sizes from 220x430mm to 520x580mm with chain widths from 200mm to 500mm. Special executions include stainless steel or galvanized construction, weather protection, speed sensors, zone rated drives, intermediate outlets, and recirculation heads.
Chain conveyors from Ottevanger Milling Engineers are sturdy and can convey difficult bulk materials over long distances at capacities up to 400 m3/h. They are fully enclosed and have geared drive units, wear plates, and overflow valves. They are available in various sizes from 220x430mm to 520x580mm with chain widths from 200mm to 500mm. Special executions include stainless steel or galvanized construction, weather protection, speed sensors, zone rated drives, intermediate outlets, and recirculation heads.
Ottevanger Milling Engineers Chain conveyors are sturdy enough to convey » Executed in AISI304 the most difficult bulk materials. The chain conveyors are available in » Executed in galvanized S235 steel capacities up to 400 m3/h. These conveyors are exceptionally suitable for » All-weather features like drive unit housing and shaped covers conveying over long distances. » Speed sensor » ATEX22 zoned drive units Features » Intermediate outlets » S235 steel trough, fully enclosed design » Recirculation head with intermediate bottom » Primer and paint finish » Inlet flow regulation slide » Geared drive units » Protective chain hood for intake applications » Flexible coupling » Spotfilter » HPME wear plate » Guide strips (C45) » Overflow valve » Chain tensioner
Capacity (m3/h) Chain Pitch
Type 0,3 (m/s) 0,4 (m/s) 0,5 (m/s) 0,6 (m/s) width circle 220 x 430 47 63 78 94 200 250
320 x 430 70 94 118 141 300 250
420 x 430 94 126 157 189 400 250
420 x 580 160 213 266 320 400 400
520 x 580 200 266 333 400 500 400
Ottevanger Milling Engineers
www.ottevanger.com Moerkapelle and Aalten - The Netherlands Tel.: +31 79 593 22 21 E-mail: info@ottevanger.com » Design » Engineering » Manufacturing » Erection and commissioning » Feed mills » Pet food plants » Aqua feed plants » Cereal processing plants » Soybean processing plants » Premix and concentrate plants » Silos » Bulk storage and handling systems » Electric control and automation