Professional Documents
Culture Documents
Silo - Tips - Amk Training Program 2013
Silo - Tips - Amk Training Program 2013
Standard
training course
Custom-made training
with your conditions.
Training course: Programming & control, Training course: Programming & control,
AMK controller programming with AMK controller programming with
AFL libraries (SUL21/2 days) CANopen & WebVisu *
servicing course
AMKASYN KE/KW And AMKAMAC CONTROLLERS
Course objective:
Locate and replace defective components and restart system
Procedure: Following a short introduction to the system, the course will focus on how to operate the
system in everyday use. Course participants are given the use of training equipment for
this purpose. Participants will practice locating and replacing defective components and
restarting the system. They will also save application-specific project data and transfer this
to the newly replaced modules
Tools in use: PC-Software AIPEX PRO or AIPEX and CODESYS (as agreed)
Course contents:
Overview - Devices and components
Connectors, interfaces, device technology, options, accessories
Backing up application-specific system data
Diagnostics, error localisation
Replacement of modules
Transfer of backup application-specific data
System restart
Prerequisites:
General knowledge of servo-drive technology.
Please bring a laptop for the practical exercises. Each course participant must have
administrator rights for their own laptop.
Company licence PC-software AIPEX PRO or AIPEX and CODESYS (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training Course SUL 12
servicing course
AMKASYN AN/AZ/AW
Course objective:
Locate and replace defective components and restart system
Procedure: Following a short introduction to the system, the course will focus on how to operate the
system in everyday use. Course participants are given the use of training equipment for
this purpose. Participants will practice locating and replacing defective components and
restarting the system. They will also save application-specific project data and transfer this
to the newly replaced modules
Course contents:
Overview - Devices and components
Connectors, interfaces, device technology, options, accessories
Backing up application-specific system data
Diagnostics, error localisation
Replacement of modules
Transfer of backup application-specific data
System restart
Prerequisites:
General knowledge of servo-drive technology.
Please bring a laptop for the practical exercises. Each course participant must have
administrator rights for their own laptop.
Company licence PC-software AIPEX, APROS and AiPAR (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training program SUL 19
Course summary:
Participants will be given a presentation to get an overview of the respective drive system as
well as the knowledge needed for its proper handling and operation. The focus of the course
will be on the subsequent practical exercises which shall enable the participants to learn how to
handle and operate the drive system and the AIPEX PRO software tool.
Any training equipment required for this purpose will be provided.
Controller module:
KW-R06 and KW-R16 with EtherCAT
Integrated controller card iDT/iDP/iX/iC with EtherCAT
Course content:
Product overview: inverters, motors, controllers and accessories
Servo drive system – principles of operation
Connection technique and interfaces
Operating modes (torque, speed and position control)
Basic drive functions
Commissioning, parameterisation, controller optimisation, diagnostics
Drive interconnection
Requirements:
Basic knowledge of servo drive technology
Please bring a notebook for the practical exercises.
Each course participant must have administrator rights for their own notebook.
Company license for AIPEX PRO PC software (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training program SUL 20
Target group: CODESYS beginners or as preparation for AMK controller programming A4/A5.
Course summary:
Participants will be given a presentation to get an overview of the product as well as the
necessary knowledge needed for its proper handling and operation.
The focus of the course will be on the practical exercises which shall enable the participants to
learn how to work with CODESYS and Structured Text programming language.
Course content:
CODESYS functions and libraries
IEC programming language Structured Text (ST)
Data declaration
Defined data types (arrays, structures, enumeration types)
Standard modules according to IEC 61131-3
Visualization elements
Requirements:
Basic knowledge of PLC programming or a high level language would be of advantage.
Please bring a notebook for the practical exercises.
Each course participant must have administrator rights for their own notebook.
Company license for AIPEX PRO PC software (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training program SUL 21
Course summary:
Participants will be given a presentation to get an overview of the product as well as the
knowledge needed for its proper handling and operation. The focus of the course will be on the
practical exercises which shall enable the participants to learn how to handle and operate
CODESYS, standard AFL axes and AFL application modules.
Controllers: A-series
Course content:
Product overview: controllers and accessories
Writing a PLC program for AMK drives with the following functions:
Status, control and diagnostics
Torque, speed and position control
Real-time level positioning
Integration of an external encoder (hand wheel)
Virtual master as a set point generator
Creating a cam disc function
Integration of an EtherCAT I/O terminal
Creating a visualization
Requirements:
Sound knowledge of CODESYS programming software and Structured Text programming language.
Prior participation in the training course „Basic knowledge of AMK controller programming“ is
recommended. Please bring a notebook for the practical exercises. Each course participant must
have administrator rights for their own notebook.
Company license for AIPEX PRO PC software and AFL libraries (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training program SUL 22
Course summary:
Participants will be given a presentation to get an overview of the product as well as the
knowledge needed for its proper handling and operation. The focus of the course will be on the
practical exercises which shall enable the participants to learn how to work with Qt.
Controllers: A-series
Course content:
Data exchange between AIPEX PRO and Qt (symbol file)
Cyclic and event-triggered updating
Key buttons and switches
Status elements
Display and input panel
NumPad
Requirements:
Knowledge of programming language C++
Please bring a notebook for the practical exercises.
Each course participant must have administrator rights for their own notebook.
Company license for AIPEX PRO PC software and Qt visualization (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training program SUL 23
Course summary:
Participants will be given a presentation to get an overview of the respective drive system as
well as the knowledge needed for its proper handling and operation. The focus of the course
will be on the subsequent practical exercises which shall enable the participants to learn how to
handle and operate the AMK safety drive system and the AIPEX PRO Safety Editor.
For this purpose, the necessary training equipment including controller cards KW-R07 and Safety
Boards will be provided. Instructions will be given via local safety inputs and outputs.
Controller module:
KW-R07 and KW-R17 with Safety Boards
iX/iC/iDT/iDP with integrated Safety Board
Course content:
Product overview: safety modules
Functional safety – principles of operation
Safety monitoring of encoder signals
Safe torque off (STO)
Safe stop 1 (SS1)
Safe operating stop (SOS)
Safe stop 2 (SS2)
Safety maximum speed (SMS)
Safe speed range (SSR)
Safely-limited speed (SLS)
Safe direction (SDI)
Safely limited increment (SLI)
Requirements:
Basic knowledge of servo drive technology
Please bring a notebook for the practical exercises.
Each course participant must have administrator rights for their own notebook.
Company license for AIPEX PRO PC software with Safety Editor (not included in the course fee)
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
ARRANGE THE FUTURE
Training Course SUL 30
❏ KW-R05/R06/R16 ❏ KW-R07/R17
❏ AW-R02 ❏ AW-R03
Controller: ❏ A4S/A5S ❏ A4D/A5D ❏ AS-PL ❏ AS-C
❏ AS-C03/05 ❏ PS-x (only service training)
❏ KU/KW-PLC ❏ Safety SPS (i.p.) ❏ KU/KW-R03P
Software: ❏ AIPEX ❏ AIPEX PRO
❏ CODESYS ❏ AIPAR ❏ APROS (only service training)
Others:
Elec tric Drives · Gearmotors · Compressors · Controllers · Software · Engineering · Ser vice · Special Machines · Automation
facsimile + 4 9 (0)7 02 1/ 5 0 0 5 -19 9
AMK software products are not included in the course fee. We will be happy to provide you with an individual offer for the required
number of the software licenses for your company.
In the case of cancellation of the course registration up to 3 weeks prior to the beginning of the course, 50 % of the total course
fee will be charged.
Type of training:
❏ Standard training course
Our standard training courses are conducted in groups of 3 to 6 participants who can be from the same or different
companies. We reserve the right to cancel/suggest an alternative date for courses with less than 3 registered
participants.
Training location:
❏ AMK office in Kirchheim/Teck, Germany, Gaußstraße 37-39
❏ Training at your premises
Our training courses can be carried out at customer’s premises, where a suitable training room, equipped with a video
projector and 3 x 400 V / 230 V (without RCD), need to be provided. You will be provided with all the necessary
training equipment in advance in this case. The training equipment needs to be returned to AMK immediately after the
training
Languages:
Course language: ❏ German ❏ English
Training documents: ❏ German ❏ English
facsimile + 4 9 (0)7 02 1/ 5 0 0 5 -19 9
Standard training courses:
Training course: Service AMKASYN KE/KW and AMKAMAC Controllers servicing course Price per head,
11 Required company license for AIPEX PRO or AIPEX and CODESYS PC software ❏ 1-day training Euro 690,-
Training course: Service AMKASYN AN/AZ/AW servicing course Price per head,
12 Required company license for AIPEX, APROS or AIPAR PC software ❏ 1-day training Euro 690,-
Training course: Devices AMKASYN KE/KW and iX/iC drive systems, Price per head,
19 AMKASMART iDT/iDP servo drive, Required company license for AIPEX PRO PC software ❏ 2-days training Euro 1.090,-
Training course: Programming Basic knowledge of AMK controller programming, Price per head,
20 Required company license for AIPEX PRO PC software ❏ 2-days training Euro 1.090,-
Training course: programming and control
Price per head,
21 AMK controller programming with AFL libraries,
Required company license for AIPEX PRO PC software and AFL libraries
❏ 2-days training Euro 1.090,-
Training course: Programming AMK Qt Visualization (Basics), Price per head,
22 Required company license for AIPEX PRO PC software and Qt visualization ❏ 2-days training Euro 1.090,-
Safety system: Functional safety, Price per head,
23 Required company license for AIPEX PRO PC software with Safety Editor ❏ 1-day training Euro 690,-
Custom-made training: Make your own choice about the content of your training.
30 We will make you a specific offer. (See choice list) ❏
Company license PC software
For the enquired training we your company licences as follow:
Company licence PC-software AIPEX PRO ❏
Company licence PC-software AIPEX PRO with Safety Editor ❏
Company licence PC-software AFL libraries ❏
Company license for Qt visualization ❏
Company licence PC-software AIPEX ❏
Company licence PC-software CODESYS ❏
Company licence PC-software AIPAR ❏
Company licence PC-software APROS ❏
Your data:
Company
Street/Street no.
Postal code, city
Contact
Telephone
Fax
Email
I hereby register the following course participants
Surname, first name, job title Field of activity Course date/ Date request
The courses are limited to between 3 and 6 people. If notification of cancellation is given no later than three weeks prior to the start of the course, 50% of the
course fee shall be refunded. We reserve the right to cancel a course or propose an alternative date if fewer than three people register for the course.
facsimile + 4 9 (0)7 02 1/ 5 0 0 5 -19 9
Company-stamp
Roomreservations:
Arrival date:
Departure date:
Sign:
Reference Hotels: