1A-238 Engine Control System (6WF1)
Sep Raton Vanes) Yes to
‘Check the performance of te exhaust system:
7 p a - Go to “Checking the
Was the ation complete? Gotosieps | Exhaust System™
‘Check the symptom ofthe engine again,
ows the engine operate nal? Got Sup 17 Gow Sup 9
Inspect the boost sensor, almospheric pressure
sensor, and engine coolant temperature (ECT)
9 | Refer to DTC P0023, P0032, FOOT! to inspect the
parts, and repair or replace the affected parts
where faults are found
Was the action complete? Goto Step 10 -
Inspect the fuel system.
Refer to DTC P0271.PO278 (injector), DTC POTS,
Pott, P0151, P0226, P0227, PO245 (diagnosis of
fuel rai, supply pump systems) and perform
10 | inspaetions: =
If any fault is detected, repair or replace the
affected pats.
Was the action compte? Goto Step 11 =
‘Check the symptom of the engine again,
" -
Does the engine operate normally? Goto Step 17 Goto Step 12
Check the mechanical parts of the engine, and
repairif any fais are found,
12 | Valve system (valve clearance) -
Was the action compte? Goto Step 13, -
‘Check the symptom of the engine again,
10 S
Does the engine operate normally? Goto Step 17 Goto Step 14
1. Replace the ECM:
IMPORTANT:
‘After replacing the ECM, cay out the
44 | programming forthe folowing items. -
+ Qadjustment data
+ Injector ID code
Was the action complete? Goto Step 15 -
‘Check the symptom of the engine again,
18 =
Dove the engine operate normally? Goto Step 17 Goto Step 16.
1. Check the mechanical parts ofthe engine, and
repair f any faults are found,
+ Valve system
+ Injector
16 + Compression Pressure =
+ Timing Gear
+ Piston/rank, et, related
Was the action complete? Goto Step 17 _
‘After reparring the vehicle, verify the repairs.
” -
was the action compote? Verity rep