1A-236 Engine Control System (6WF1)
‘Sep ‘ation Valve(s) Yes No.
Tnapeet the boost sensor and atmaspherie pressure
Refer to DTC P0032, P0071 to inspect the parts,
6 | and repair or replace the affected parts where fauts oT
are found
Was the action complete? G00 Sep 7 -
‘Check te symptom ofthe engine again,
r Does the engine operate normally? — Go to Step 11 Goto Step 8
1. Replace the ECM.
IMPORTANT:
‘After replacing the ECM, camy out the
8 | programming for the folowing items. =
+ Qadjustment data
+ Injector 10 code
Was the action complete? Coto step 9 _
‘Check the symptom of the engine again,
Does the engine operate normally? Goto Step 11 Goto Step 10
1. Check the mechanical parts ofthe engine, and
repair if any faults are found,
+ Valve system
+ Injector
10 + Compression Pressure
+ Timing Gear
+ Piston/Crank, et, related
Was the action compte? Goto Sten 9 -
"After reparring the vehicle, verily the repairs.
" -
was the action complete? Verify repair =