EJERCICIOS PROPUESTOS. TEMA 10
Apartado 10.1.1
Figuras 10.5 y 10.6
Ejemplo 10.1
Apartado 10.1.2
Figura 10.7
‘Apartado 10.1.2
Figura 10.8,
Apartado 10.1.2
Figures 10.7 210.9
Apartado 10.2
Figuras 10.14 a 10.17
Ejemplo 10.2
Apartado 10.2
Figuras 10.14 y 10.17
Ejemplo 10.2
Apartado 10.21.
Figura 10.19
‘Apartado 10.2.1
Figura 10.20
Figuras 10.19 y 10.20,
Apartado 10.2.1
Ejemplo 10.3
546
101
10.2
10.3
104
105
106
107
108
10.9
10.10
Determine la atenuacién que sufre un par trenzado de 100 m de longitud
de tipo Cat 5 ante una seal de continua. Si la sefial que manejase fuese
de alterna, con una frecuencia maxima de 1 MHz, determine el compor-
tamiento frecuencial y el ancho de banda del sistema a3 dB. ¢Cudl ser
el ancho de banda con un error del 0,1 %?
Un sensor produce una tensi6n de salida entre 10 y 30 mV que debe
ser amplificada, pero su impedancia de salida es de 100 MQ. Si el ca-
ble de conexién entre el sensor y el amplificador tiene una resistencia
serie de 0,1 Q/m y la resistencia de fugas es de 300 MQ/m, :cusl es la
pérdida de sefial en una conexin de 2 m de cable?
En el caso del problema anterior, proponga un sistema para reducir este
efecto, basado en el empleo de una guarda activa.
Si en el caso del Ejercicio 10.2 se tuviese en cuenta que la sefial es de alter-
nna, con una frecuencia maxima de 200 kH7, y el cable tuviese una capaci-
dad de 40 pF/m, determine la atenuacién que se produciria en este caso.
Proponga un bloque que permita adaptar las sefales que recibe una en-
trada de tensién 0/5, 0/10 y -5/5 V ala entrada de un convertidor A/D
cuya escala empieza en 0 V y termina en 4,096 V.
Un sistema debe recibir sefales 0/5 V en una de sus entradas analégicas
de tensién. Si se pretende recibir la sefial procedente de un sensor com-
prendida entre ~2, y +2,5 V, disefe un sistema de adaptacién sabiendo
que sélo se dispone de una tinica tensién de alimentacién de +5 V
Sabiendo que el cobre tiene una resistividad de 1,71-10 Qm, obtenga un.
grafico que represente la atenuacién de un bucle de tensién en funcién
de la seccién del conductor para una distancia de 100 m entre el emisor y
el receptor.
En las mismas condiciones del problema anterior, dibuje un grafico que
represente el ancho de banda de un bucle de tensién sabiendo que el
cable que se menciona tiene una capacidad de 45 pF/m, de forma més 0
menos independiente de la seccién del conductor.
Un bucle de tensién 0/10 V se emplea para enviar sefiales que pueden
tener una frecuencia maxima de 1 MHz. Determine la longitud del enlace
para un error inferior al 0,1 % y para un error inferior al 1%, desprecian-
do las impedancias de salida y legada.
{Qué efecto tiene sobre el resultado del problema anterior el hecho de
considerar que la impedancia de salida de la fuente no es nula y que la
impedancia de entrada no es infinita? Determine el efecto para una resis-
tencia de salida de 50 Q y para una resistencia en la llegada de 1 MQ.Apartado 10.3
Figura 10.26
Apartados 10.2 y 10.3
10.11
10.12
Realice un sistema para convertir una sefial de 0/5 V en una sefial de
corriente de 0/20 mA.
Compare un bucle de tensién 0/5 V con un bucle de corriente 4/20 mA
suponiendo ideales todos los agentes intervinientes en el sistema a ex-
cepcién del cable.
547Bibliografia
En las siguientes paginas aparece la bibliografia que se ha considerado rele-
vante en cada tema y un grupo final que puede considerarse importante para
el conjunto de los capitulos o para la mayoria de ellos.
Se ha clasificado en dos grandes grupos: el primero esté formado por libros,
articulos, notas de aplicaci6n y normas, aspectos que, de una u otra manera
cubren el contenido ya sea con una visin semejante a la que se presenta en
este texto o con un punto de vista diferente, pero complementario; en el se-
gundo grupo, que se ha denominado “lecturas complementarias’, el lector
puede encontrar temas adicionales o mas avanzados, todos ellos relacionados
con el contenido del libro que permiten completar la visi6n de la Instrumenta-
cin Electrénica o encontrar nuevas aplicaciones.
En el estudio de cualquier disciplina es importante adquirir la visi6n mas am-
plia posible y bien interrelacionada con el resto de las dreas del conocimien-
to por lo que se invita al lector a consultar la bibliografia que aqui se indica e
incluso a buscar nuevas fuentes en el convencimiento de que resultaré muy
positivo para la consolidacién de las ideas. Sin embargo, toda bisqueda de in-
formacién debe realizarse con mucho cuidado puesto que en la época actual el
acceso a la difusién esta al alcance de cualquiera sin que eso signifique ningtin
tipo de refrendo o contrastacién de lo difundido.
Internet es una inmensa montana de informacién que proporciona casi todo
lo que podamos necesitar desde el punto de vista del conocimiento, pero el
problema es que lo valido, lo menos valido y lo ponzofioso aparecen mezcla-
dos con poca posibilidad de distinguirlo, Estar més o menos arriba en las
tas de busqueda, que lo mismo aparezca en muchos sitios no son seftales de la
validez de los contenidos sino que pueden responder sélo a la habilidad del
difusor para destacarse. El lector debe acostumbrarse a distinguir entre esas
informaciones para lo que siempre debe ser critico, pero desconfiar de aquello
que no aparezca firmado, que sea ajeno a instituciones responsables 0 que no
se referencie desde estas.
La bibliografia que se ha incluido en las siguientes paginas cumple estas con-
diciones por lo que cabe calificarla como fiable; no obstante, nunca hay que
renunciar a la lectura critica, como nunca hay que aceptar nada sin haber
pensado sobre ello. Estos son los motores que han movido la ciencia desde
que Descartes escribié el Discurso del Método, alld por los comienzos del si-
gloxvu,INSTRUMENTACION ELECTRONICA
550
TEMA 1
LIBROS:
Kusnt, R. O. Diseo de experimentos, 2 edicién, Thomson, 2001
TEMA 2
LIBROS:
Couciiuny, RF. y Driscou, FF. Operational Amplifiers and Linear Integrated Circuits,
Prentice Hall, 2001
Fioxt, J. M. Op Amps and Linear Integrated Circuits, Theory and Application, Thomson, 2001
Jon, W. (Editor). Op. Applications, Analog Devices, Julio de 2002
Maneant, R (Editor). Op Amps for Everyone. Design Reference, Texas Instruments, Agos-
to de 2002
Prniz, M. A. et l. Iustrumentacion Electrénica, Paraninfo, 2008
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Analog Devices, Ideal Voltage Feedback (VFB) Op Amp, MT-032 tutorial, Octubre de 2010
Analog Devices, Voltage Feedback Op Amp Gain and Bandwidth, MT-033 tutorial, Octu-
bre de 2010
Analog Devices, Current Feedback (CFB) Op Amps, MT-034 tutorial, Octubre de 2010
Analog Devices, Op Amp Inputs, Outputs, Single-Supply, and Rail-to-Rail Issues, MT-035
tutorial, Octubre de 2010
Analog Devices, Op Amp Output Phase-Reversal and Input Over-Voltage Protection, MT-
036 tutorial, Octubre de 2010
Analog Devices, Op Amp Input Offset Voltage, MT-037 tutorial, Octubre de 2010
Analog Devices, Op Amp Input Bias Current, MT-038 tutorial, Octubre de 2010
Analog Devices, Op Amp Total Output Offet Voltage Caleulatons, MT-039 tutorial, Oe-
tubre de 2010
Analog Devices, Op Amp Input Impedance, MT-040 tutorial, Octubre de 2010
Analog Devices, Op Amp Input and Output Common-Mode and Differential Voltage Range,
MT-O41 tutorial, Octubre de 2010
Analog Devices, Op Amp Commont-Mode Rejection Ratio (CMRR), MT-042 tutorial, Oc-
tubre de 2010
Analog Devices, Op Amp Power Supply Rejection Ratio (PSRR) and Supply Voltages, MT-
(043 tutorial, Octubre de 2010
Analog Devices, Op Amp Open Loop Gain and Open Loop Gain Nonlinearity, MT-044 tu-
torial, Octubre de 2010Analog Devices, Op Amp Bandtoidth and Bandwidth Flatuess, MT-045 tutorial, Octubre
de 2010
Analog Devices, Op Amp Settling Time, MT-046 tutorial, Octubre de 2010
Analog Devices, Op Amp Noise, MT-047 tutorial, Octubre de 2010
Analog Devices, Precision Op Amps, MT-054 tutorial, Octubre de 2010
Analog Devices, High Speed Voltage Feedback Op Amps, MT-056 tutorial, Octubre de 2010,
Gancia, A. Amplifier Applications Guide. Section 1. Single-supply Amplifiers. Analog De-
June, W. y Kestes, W. Amplifier Applivations Guide, Section 2. High Speed Op Amps. Ana-
log Devices.
Texas Instruments, revision Operational Amplifiers, 2012
Zostean.en, H. Amplfer Classes, Mini tutorial MT 207, Analog Devices, 2012
Zovteanuey, H. Full Wave Rectifier, Mini tutorial MT 211, Analog Devices, 2013
Zuwan.en, H. Half Wave Rectifier, Mini tutorial MT 212, Analog Devices, 2012
Zusman.en,H. lnverting Amplifier, Mini tutorial MT213, Analog Devices, 2013
Zosmmanes, H. lverting Summing Amplifier, Min tutorial MT 214, Analog Devices, 2012
LECTURAS COMPLEMENTARIAS:
Analog Devices, Op Amp Noise Relationships: Tif Noise, RMS Noise, and Equivalent Noise
Banuidth, MT-048 tutorial, Octubre de 2010
Analog Devices, Op Amp Total Output Noise Calculations for Single-Pole System, MT-049
tutorial, Octubre de 2010
Analog Devices, Op Amp Total Output Noise Calculations for Second-Order System, MT-
(050 tutorial, Octubre de 2010
Analog Devices, Current Feedback Op Amp Noise Considerations, MT-051 tutorial, Octu-
bre de 2010
TEMA 3
LIBROS:
Mann, R. (Editor). Op Amps for Everyone. Design Reference, Texas Instruments, Agos-
to de 2002
ARTICULOS:
Ouven, M. “Elementos de disefio de circuitos de Amplificacién del ECG", XII Semina-
rio de Ingenieria biomédica, Uruguay, 2004
BIBLIOGRAFIA
551INSTRUMENTACION ELECTRONICA
552
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Analog Devices, High Speed Current Feedback Op Amps, MT-057 tutorial, Octubre de 2010
Analog Devices, Choosing Between Voltage Feedback (VFB) and Current Feedback (CFB) Op
Amps, MT-060 tutorial, Octubre de 2010
Analog Devices, Chopper Stabilized (Auto-Zero) Precision Op Amps, MT-055 tutorial, 2010
Analog Devices, High Speed Current Feedback Op Amps, MT-056 tutorial, 2010
‘Texas Instruments, Frequent Faux Pas in Applying Wideband Current Feedback Amplifiers,
(OA-15, Agosto de 1990, revision de Abril de 2013
Analog Devices, ‘Coupler ADuM3190 Isolated Error Amplifier Evaluation Board, 2013
Cane, D. Differential Data Transfer: What's the Difference?, Analog Devices, 2012
Keaxausn, D. For Years, Desiguers of Industrial, Medical, and Other, iCoupler® Digital Iso-
lator Group, Analog Devices, Inc. 2013
Mocs, R, Ways to Optimize the Performance of a Difference Amplifier, Application note
AN-589, Analog Devices 2011
Risern, J.R. A user's guide to IC Instrumentation Amplifiers, Application note AN-244,
Analog Devices
LECTURAS COMPLEMENTARIAS:
Analog Devices, Differential Driver Analysis, MT-076 tutorial, 2010
‘Texas Instruments, PC Guide, 2013,
‘Texas Instruments, RS485 Reference Guide, 2012
TEMA 4
LIBROS:
Casrer, B. y Huriswans, L, P. Handbook Of Operational Amplifier Active RC Networks,
‘Texas Instruments, Octubre de 2001
ARTICULOS:
Avenpano, L. E Duque, E; Goria, C. M. y Vauencia, T. “Andlisis de la arquitectura Sa-
llen-Key", Scientia et Technica No. 16, Agosto de 2001
Baxex, B.C. “Stop-band Limitations of the Sallen-Key Low-Pass Filter”, Analog Applica-
tion Journal, Texas Instruments, 2008
Burvenworrn, 8. “On the theory of filter amplifiers”, Experimental Wireless and Wireless
Engineering, pp. 536-541, Octubre de 1930
Canter, B. “High-Speed Notch Filters”, Analog Application Journal, Texas Instru-
ments, 2006
Mouna, J. “Design a 60Hz Notch Filter with the UAF42", Burr-Brown Application Bolle-
tin, 1994BIBLIOGRAFIA
Satuen, R. P. y Key, E. L. “A Practical Method of Designing RC Active Filters”, IRE
Tians, Circuit Theory, CT-2, pp. 74-85, Marzo de 1968.
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Kaaki, J. Active Low-Pass Filter Design, Texas Instruments, 2000
Mines, R. A Bessel Filter Crossover, and Its Relation to Others, Rane Corporation, 1998
Texas Instruments, Analysis ofthe Sallen-Key Architecture, Julio de 1999
Zonaruen, H. Dual Amplifier Band-Pass (DABP) Filter, Mini tutorial MT 209, Analog
Devices, 2012
Zovaney, HF, and Q in Filters, Mini tutorial MT-210, Analog Deviees, 2012
Zunmasten, H. Low-Pass to Band-Pass Filter Transformation, Mini tutorial MT 215, Ana-
log Devices, 2012
Zumaniten, H, Low-Pass to High-Pass Filter Transformation, Mini tutorial MT 217, Ana-
log Devices, 2012
Zontaatsuen, H. Multiple Feedback Band-Pass Design Example, Mini tutorial MT 218, Ana-
log Devices, 2012
Zuwani.es, H. Multiple Feedback Filters, Mini tutorial MT 220, Analog Devices, 2012
Zoveanen, H. Sallen-Key Filters, Mini tutorial MT 222, Analog Devices, 2012
Zovmmanen, H. State Variable Filters, Mini tutorial MT 223, Analog Devices, 2012
Zovteanuen, H. The Butteroorth Response, Mini tutorial MT 224, Analog Devices, 2012
Zovwanon, H. Twin T Noto Filler, Mini tutorial MT 225, Analog Devices, 2012
LECTURAS COMPLEMENTARIAS:
ouput, J. FAILSAFE Biasing of Differential Buses, National Semiconductor (Texas Instru-
ments), Julio de 1992
Griuto,G. Jy Pextz, M.A. y Fuonevciss, A. E. Sychronic Filter Based on Switched Capae
citor Filters for High Stability Phase-Detectors Systems, IEEE-IMTC 200 Instrumentation
and Measurement Technology Conference, Sorrento, Italy, Abril de 2006
Zuvan.ey, H. Allpas Filters, Mini tutorial MT 202, Analog Devices, 2012
Zovman.ey, H. Bainter Notch Filters, Mini tutorial MT 203, Analog Devices, 2012
Zowaney, H. The Bessel Response, Mini tutorial MT 204, Analog Devices, 2012
Zuvtean.en, H. Biquadratic (Biguad) Filters, Mini tutorial MT 205, Analog Deviees, 2012
Zuvtean.en, H. The Chebyshev Response, Mini tutorial MT 206, Analog Devices, 2012
Zumanuen, H. Digitally Programmed State Variable Filter, Mini tutorial MT 208Analog
Deviees, 2012
Zomanuin, H. Low-Pass to Banud-Reject (Notch) Filter Transformation, Mini tutorial MT
216, Analog Devices, 2012
553INSTRUMENTACION ELECTRONICA
554
TEMA 5
LIBROS:
Kosten, W. (Editor). Analog-Digital Conversion, Analog Devices, 2004
‘Omega, The Data Acuisition Systems Handbook and Encyclopedia
Gaswer, PH. Adoaneed Instrumentation and Computer YO Design, IEBE Press, 1994
Lane, TT. Computerized instrumentation, John Wiley and Sons, 1991
LECTURAS COMPLEMENTARIAS:
Ausar, A. MICROWIRE™ Serial Interface, National Semiconductor (Texas Instruments),
Enero de 1992
Analog Devices, Differential Drivers for High Speed ADCs Overview, MT-075 tutorial, Rev.
D Octubre de 2010
Lavy, D. Sampling Theory For Digital Audio, Lavey Engineering, Ine, 2004
Maxim Integrated, Daisy-Chaining SPI Devives, APP 3947, Maxim, Diciembre de 2006
Motorola Ine, SPI Block Guide V03.06, Enero de 2000
Penuz, M. J. Troubleshooting PC Bus Protocol, Texas Instruments, Octubre de 2009
NXP Semiconductor, UMT0204. PC-bus specification ad user manual, Octubre de 2012
Philips Semiconductors, FS bus speciation, 1986
‘Saati, S. W. The Scientist and Engineer's Guide to Digital Signal Processing, Chapter 3, Ca-
lifornia Technical Publishing, 1997
Texas Instruments, Specifying AID and D/A Converters AN-156 Mayo de 2004
TEMA 6
LIBROS:
usury, E.(editor). Basie metrology and electrical measurements, MIR, 1987
Omega, The Omega Temperature Measurement Handbook and Encylopedia, 7th Edition, 2014
‘Omega, The Pressure Strain and Force Handbook, 9th Edition, 2011
‘Omega, Flow, Level ana Environmental Handbook & Encyclopedia, 8th Edition
ARTICULOS:
Baraier, R, “Tutorial: Photodetection”, New Developments in Photodetection, Lyon, Fran-
«ce, Julio de 2011
Dazuscex J. H."The Temperature Coefficiente of Resistance of Copper”, Bulletin ofthe
urea of Standards Vo. 7, No.1, pp. 71-101 Febrero de 1911Paeston-THomas, H. “The International Temperature Scale of 1990 (ITS-90)", Metrolo-
‘gia 77. 3-10 (1990)
Steinuare, J. 8. y Hazt, 8. R. "Calibration Curves for Thermistors”, Deep Sea Research
15:497, 1968
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Analog Devices, High Prevision, Low Cost Current Sources Using the AD8276 Difference
Amplifier and the ADB603 Op Amp, 2013
Burr-Brown, Implementation and Applications of Current Sources and Current Recievers,
Burr-Brown Application Bolletin, 1989
Comnerstore Sensors, A, B, C Coefficients for Steinhuart-Hart Equation
Horewann, K. Applying the Whetastone circuit, Hottinger Baldwin Messtechnik GmbH
Hupsciimann, S. y Scheer, M. Magnetoresistive Sensors. Principles of Operation and
Applications, ZETEX, Application Note 20, Abril de 1996
‘Murnane, M. Current Sources: Options and Circuits, Analog Devices, 2008
Since, A. RTD Temperature Transmitter for 2-Wire 4 to 20-mA Current Loop Systems, Texas
Instruments Ine, 2014
Sur, R. M. Make a Prevision Current Source odr Current Sink, Burr-Brown Application
Bolletin, 1990
NORMATIVA:
‘The International Practical Temperature Scale of 1968, Adopted by the Comité Internatio-
nal des Poids et Mesures, Metrologia, Vol5, No 2, pp- 35-44, Abril de 1969
DIN 43 760, RID Temperature vs. Resistance Table For European Curve, Alpha = 0.00385,
17-90
LECTURAS COMPLEMENTARIAS:
Solid State Division, Characteristics and use of infrared detectors. Technical information SD-
12, Hamamatsu Photonics, Marzo de 2011
Stanford Research Systems, Calibrate Steinart-Hart Coefficients for Thermistors, Octu-
bre de 2012
TEMA7
LIBROS:
Ivo, L. Fourier Analysis, Reed College, 2008
Omega, The Omega Temperature Measurement Handbook and Encyclopedia, 7th Edi-
tion, 2014
Omega, The Pressure Strain and Force Hanudbook, th Edition, 2011
BIBLIOGRAFIA
555INSTRUMENTACION ELECTRONICA
556
Omega, Flow, Level and Environmental Handbook & Encyclopedia, 8th Edition,
Pexiz, M. A.et él Instrumentacion Electrinica, Paraninfo, 2008
ARTICULOS:
Grto,G. J; Perez, M.A.y Florevcins, A. E.“Synchronic Filter Based on Switched Ca-
pacitor Filters for High Stability Phase-Detectors Systems”, IEEE-IMTC 2006, Instru-
mentation and Measurement Technology Conference, Sorrento, Italy, Abril de 2006
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Auvanez, A. ot. Smart Sensors id Applications. Student Guide, Parallax, 2006
Analog Devices, LVDT Signal Conditioning Cinvit, Analog Devices, 2014
Brel, Ceramic Capacitor Temperature Coefficient (TC) Coding, 2002
Fions; R. Cincnit Designer's notrebook. Understanding Temperature Coeffient Capacitance,
American Technical Ceramics Corporation, Doc 001-927 Rev. E, 2005
Kivi, TA. y Duval, B. Sensors 101:Baumer electric basrs, Baumer electric
La Guia MetAs, Sensores de humedad. Tipos y aplicaciones. MetAs, $.A. de CV. Cd, Mayo
de 2008
National Instruments, Measuring Position and Displacement with LVDTs, , Septiembre
de 2006
‘Texas Instruments, Sigual Conditioning for Sophisticated Transducers, AN-301, Enero de
1982, Rev. 2013
Vaisala, Sensor Vaisala HUMICAP® para medir hnmedad relative. Ref, B210781ES-C, 2012
NORMATIVA:
ASTM E 1907-06a. (2006), Standard Guide to Methods of Evaluating Moisture Conditions
of Concrete Floors to Reveive Resilient Floor Coverings. ASTM, West Conshohocken, PA.
LECTURAS COMPLEMENTARIAS:
Mitutoyo, Surface Rougness Measurement. Practical Tips for Laboratory and Workshop,
EEUU, Diciembre de 2009
Pextz, M. A. et al. Impedance Spectrometry for Monitoring Alcoholic Fermentation Kinetics
under Wine-Making Industrial Conditions, XIX IMEKO World Congress Fundamental
and Applied Metrology, Lisbon, Portugal, Septiembre de 2009
TEMA 8
LIBROS:
Crtanoranouut 8. Hall Coefficient of Germanium, Physics Department, The College of
Wooster, Wooster, Ohio 44691 Abril 29, 1999Haxawata, T. (editor). Photomuttiplier Tubes, Basies and Applications Tercera edicién, Ha-
‘mamatsu, 2005
Hamamatsu Photonics, Opto-Semiconductor Handbook, 2013
Kasi, S. Hall effet, e-booklet, 2001
Omega, The Omega Temperature Measurement Handbook and Encyclopedia, 7th Edi-
tion, 2014
Omega, Flow, Level and Enrironmental Handbook & Encyclopedia, 8th Edition
Pexez, M, A. et él. Instrumentacin Electronica, Paraninfo, 2008
exez, M. A. y Muniz, R. New Fiber Optic Developments: Chapter 8. Optical Fibres Tirbidi-
‘metres, Intech, 2009
Perez, M. A.j Gonzauez, O. y Arias, J. R. Optical Fibers: Chapter 10. Optical Fiber Sensors
{for Chemical and Biological Measurements. Intech, 2013
ARTICULOS:
Gana, R, “Organic pyroelectric materials for device applications”, BAU FBE Dergisi
Cit-12, Says, 75.90, Temmuz 2010
Masastey, A. V.et dl. "“Interdigital Sensors and Transducers”, Pro. of the IEEE, VOL. 92,
NO.5, Mayo de 2004
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Geen, R. Hall Effect Measurements in Materials Characterization, Keithley Instruments,
Inc. 2011
Ifineon Technologies, Liquid Level Sensing, 2009
Kaaxi, J. Signal Conditioning Piezoelectric Sensors, Texas Instruments, Septiembre de 2000
Maxim Integrated, Implementing Cold-Juction Compensation in Thermocouple Applica-
tions, Application Note 4026, Abril de 2007
Measurement Specialties Inc, Interfacing Piezo Film to Electronics, 2006
Micano, 8. Allegro Hall-Effect Sensor ICs, 2009
Solid State Division, Characteristics and Use of Charge Amplifier, Hamamatsu, Octubre
de 2001
Texas Instruments, IC Temperature Sensor Provides Thermocouple Cold-Junction Compensa-
tion, AN-225, Abril de 2013
Teyssanpien, C. From Current Transformers to Hybrid Sensors, in HV, Merlin Gerin, E/CT
170, Marzo de 1995
NORMATIVA:
ASTM Standard test methods for measuring resistivity and Hall coefficient and determining
Hall mobility in single-crystal semiconductors, ASTM F76-86, (se-aprobado en 1996)
British Standards, Thermocouples. Part 1: Reference tables, BS EN 60584-1:1996, IEC 584-
151995
British Standards, Thermacouples. Part 3: Extension and compensating cables. Tolerances and
identification system, BS EN 60584-3:2008
BIBLIOGRAFIA
857INSTRUMENTACION ELECTRONICA
558
Coutiato-PieavD, 5. Signal Conditioning for Pyreletric Passive Infrared (PIR) Sensors, ST-
Microelectronics, 2013
Consons, A; Cauos, J. Macosa, M. La Comision Internacional de Huminaciou (CIE)
TEC 584-3, Couples thermoslectriques. Toisieme parte: Cables dextension et decompensation.
Tolerances et systerned’identifation | Thermocouple. Part 3: Extension and compensating ca-
bles, Tolerances and identification system, 1989
‘Omega, ANSI and IEC Colour Codes for Thermocouples, Wire and Connectors
LECTURAS COMPLEMENTARIAS Y APLICACIONES:
Canutos, C. E, et él, On-line Estimation of Fresh Milk Composition by means of
VIS-NIR Spectrometry and Partial Least Squares Method (PLS), Instrumentation
and Measurement Technology Conference, IEEE-IMTC 2008, Victoria, Canada, Mayo
de 2008
De ta Toree, C.; Muniz, R. y Perez, M. A. A New, Low-Cost, On-Line RGB Colorimeter for
Wine Industry Based on Optical Fibers, XIX IMEKO World Congress Fundamental and
Applied Metrology, Lisbon, Portugal, Septiembre de 2009
Garcia, Ay Pexez, M. A.; GRILL0, G. J y TeeRINA, J. A new design of low-cost four-beam tur-
bimeter by using optical fibres, Proceedings of the IEEE-IMTC0S, 2005
Peniz, M. A. Garcts, A.y Bako, J. A. Optical fiber turbidimeter for full range measurement
int wine industrial processes, Instrumentation and Measurement Technology Conference,
IEEE-IMTC 2007, Warsaw, Poland, Mayo de 2007
Periz, M. A. etal, Full-range, true on-line turbidimeter based upon optical fibers for applica-
tion in the wine industry, IEEE-IMTC 2008, Victoria, Canada, Mayo de 2008
Wa, A. The DYNAPOD: A Pedal Power Unit, Volunteers in Technical Assistance, 1980
TEMA 9
LIBROS:
CCsuanc, H. H. Electronis for Nuclear Instrumentation. Theory and Application, Krieger Pu-
blishing, 1985
JOHNSON, H. y Grattan, M. High-Speed Digital Design-A Handbook for Black Magic, Pren-
tice-Hall, 1993,
Pratz, M. A. etl. Iustrumentacion Electrénica, Paraninfo, 2008
ARTICULOS:
Brooks, D. “90 Degree Comers: The Final Turn”, Printed Circuit Design, a Miller Free-
man Publication, Enero de 1998
Brooxs, D. “Crosstalk, Part 1: The Conversation We Wish Would Stop!”, Printed Ciruit
Design, a Miller Freeman publication, Diciembre de 1997
‘Brooks, D. “Differential Signals. Rules to Live By”, Printed Cireuit Design, a CMP Me-
dia publication, Octubre de 2001Brooks, D. “Differential Signals. The Differential Difference!” Printed Circuit Design, a
CMP Media publication, Mayo de 2001
Brooks, D. "Ground Plane”, Printed Circuit Design, a Miller Freeman publication, Oc-
tubre de 1997
Haxrtty, R. “Controlling Radiated EMI Through PCB Stack-up", Printed Circuit Design,
Julio de 2000
Brooks, D. “Loop Areas. Close ‘Em Tight!”, Printed Cireuit Design, Enero de 1999
Brooks, D. “Splitting Planes For Speed and Power”, Printed Circuit Design, a CMP Me-
dia publication, Diciembre de 2000
Brooks, D. “Slots in Planes. Don’t Use ‘Em!”, Printed Cinewit Design, a Miller Freeman
publication, Marzo de 1999
Brooxs, D. “Bypass Capacitors. An Interview With Todd Hubing”, Printed Cinuit De-
sign, Marzo de 1998
Brooks, D. “When Signal Integrity Matters”, Printed Circuit Design, a CMP Media pu-
blication, Septiembre de 2001
Brooxs, D. “Where's the Loop?", Printed Circuit Design, a CMP Media publication, Mar-
zo de 2001
Brooks, D. “How to Gauge Traces”, Printed Circuit Design, a CMP Media publication,
Enero de 2001
Genes, D. y Kinouet, B. “EMI and Emissions: Rules, Regulations, and Options’, EDN,
Febrero de 2001
NASA “Electromagnetic Interference / Compatibility (EMI/EMC). Control Test and
Measurement Facility”, National Aeronauties and Space Administration Lyndon B. Jo-
hhnson Space Center. Houston, Texas
Rosa, E.B, “The self and mutual inductances of linear conductors”, Bulletin of the Bu-
reau Standards, Septiembre de 1907
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Analog Devices, Electrostatic Discharge (ESD), MT-092 tutorial, 2009
‘Analog Devices, EMI, RFI, and Shielding Concepts, MT-095 tutorial, 2009
Analog Devices, Decoupling Teclntiques, MT-101 tutorial, 2009
Analog Devices, Basic linear design. Chapter 12. Printed Circuit Board (PCB Design Rules
Brooks, D. Differential Trace Design Rules. Truth vs Fiction, UltraCAD Design, Inc. 2002
Brooks, D. Electromagnetic Field Basics. The Good, the Bad, and the Ugly, UltraCAD De-
sign, Ine. 2002
Brooks, D. The Effects of Vies on PCB Traves, UltraCAD Design, Inc. 1994
Brooks, D. ESR and Bypass Capacitor Self Resonant Behavior Hoo to Select Bypass Caps, Ul-
traCAD Desiga, Inc. 2000
Brooks, D. Crosstalk, Part 1. Understanding Forward vs Backward, Mentor Graphics Cor-
poration, 2003,
Rabu, S. Engineering Aspects of Electromagnetic Shielding, Sun Microsystems, Inc.
Texas Instruments, Section 5. High Speed PCB Layout Tecloriques, High Speed Analog De-
sign and Application Seminar
Texas Instruments, System-Level ESD/EMI Protection Guide, 2012
BIBLIOGRAFIA
559INSTRUMENTACION ELECTRONICA
560
NORMATIVA:
rceimiento de mela de raiaciones no ionizantes (9 kH:-300 GHz), Area de Comprob:
cin Técnica de Emisiones Radioeléctricas/Subdireccién General de Inspeccion de las
Telecomunicaciones
LECTURAS COMPLEMENTARIAS Y APLICACIONES:
Brooks, D. “What's All This Critical Length Stuff, Anyhow?", Printed Cincuit Design, a
Miller Freeman publication, Octubre de 1999
Brooks, D. “Crosstalk, EMI, and Differential Z. Good, Bad, or Ugly?", Printed Circuit
Design, a CMP Media publication, Junio de 2001
Brooks, D. Crosstalk Coupling: Single-Ended vs. Differential, Mentor Graphics Corpora-
ton, 2004
Brooks, D. “Differential Impedance. What's the Difference", Printed Circuit Design, a
Miller Freeman publication, Agosto de 1998
Brooks, D. “Embedded Microstrip. Impedance Formula”, Printed Circuit Design, a Mi-
ler Freeman publication, Febrero de 2000
Brooks, D. “PCB Impedance Control: Formulas and Resources”, Printed Circuit Design,
Marzo de 1998
‘Brooks, D. “Fusing Current, When Traces Melt Without a Trace”, Printed Cinewit Design,
‘a Miller Freeman publication, Diciembre de 1998
Brooks, D. “Ground Bounce”, Printed Circuit Design, a Miller Freeman publication, Sep-
tiembre de 1997
‘Brooks, D. “Lessons Leamed Along the Way. RFI Control”, Printed Cireuit Design, a UP
Media Group publication, Septiembre de 2002
Baooxs, D. Controlling Impedances When Nets Branch Out, Mentor Graphics Corpora-
tion, 2005,
Brooxs, D. Crosstulk, Part 2. Simulating Crosstalk Effects, Mentor Graphics Corpora-
tion, 2004
Brooks, D. Adjusting Signal Timing (Part 1), Mentor Graphies Corporation, 2003
Brooks, D. Adjusting Signal Timing (Part 2). Crosstalk effects in serpentine traces, Mentor
Graphics Corporation, 2004
Brooks, D. Termination Placement it PCB Design. How Much Does it Matter?, UltraCAD
Design, Inc, 2002
Brooks, D. Microstrip Propagation Times, Slower Than We Think, UltraCAD Design,
Inc,, 2002
‘Brooks, D. Temperature Rise in PCB Traces, Proceedings of the PCB Design Conference,
West, Marzo de 1998
Brooks, D. “Propagation Times. Yet Another Brain Teaser!", Printed Circuit Design, a
CMP Media publication, Agosto de 2000
Brooks, D. “Skin Effect”, Printed Circuit Design and Manufacturing, UP Media, Diciem-
bre de 2009
‘Brooks, D. “Impedance Terminations. What's the Value”, Printed Cireuit Design, a Mi-
ler Freeman publication, Junio de 1999
Brooks, D. Basie Transmission Lines. Why Use ‘Em At All?, UltraCAD Design, Ine. 2002Brooks, D. Propagation Times and Critical Length. How They Interrelate, UltraCAD De-
sign, Ine. 2002
Brooks, D. Trausmission Line Terminations, 1¢S The End That Counts!, UltraCAD Design,
Ine. 2002
Brooks, D. y Graves, D. “Current Carrying Capacity of Vias, Some Conceptual Obser-
vations”, Printed Circuit Design, a UP Media Group publication, Enero de 2003
Brooks, D. What's This Thing Called “Current*? Electrons, Displacement, Light or What?,
‘Mentor Graphics Corporation, 2005
TEMA 10
LIBROS:
Chien, W. Y. Home Networking Basis, Pearson Education, Inc, 2004
Chane, H. H. Electronies for Nuclear Instrumentation. Theory and Application, Krieger Pu-
blishing, 1985
extz, M. A. et al. Instrumentacin Electronica, Paraninfo, 2008
ARTICULOS:
Harwoup, D. “4-20 mA Transmitters Alive and Kicking”, Control Engineering, Octubre
de 1998
NOTAS DE APLICACION Y OTRA INFORMACION DE FABRICANTES:
Dataforth Corporation, 4-20 mA Transmitters
Analog Devices, Flexible, 4 mA-to-20 mA, Loop-Powered Pressure Sensor Transmitter with
Voltage or Current Drive, 2013
BEB Electronics, Current Loop. Application Note, Document No. CLAN1495, 1995
‘Murata Power Solutions, Inc, 4-20m Current Loop Primer, Julio de 2009
NORMATIVA:
ANSI/ISA-50.1-1982 (R1992) formerly ANSI/ISA-$50.1-1982 (R1992), Compatibility of
Analog Signals for Electronic Industrial Process Instruments, 1982
HART Communication Foundation, Achieving Digital integration Using the HART Proto-
col. Unleashing the Power of HART in Your System
HART Communication Foundation, HART Application Guile, 1999
LECTURAS COMPLEMENTARIAS:
Kucetstaor, T. “How to design an inexpensive HART transmitter”, Analog Applications
Journal 4Q, 2012
BIBLIOGRAFIA
561INSTRUMENTACION ELECTRONICA
562
BIBLIOGRAFIA GENERAL
Cana, J.J. Elements of Electronic Instrumentation and Measurement, Third edition, Prenti-
ce Hall, 1996
(Carus, A. lustrimentacion industrial, Marcombo, 2005
Heurnic, A. D. y Cores, W. D. Instrumentacién elecrénica moderna y téenieas de medicién,
Prentice-Hall Hispanoamericana, 1991
Kuiazan, A.D. Tramsducers and Their Elements, Prentice Hall, 1994
Wensrex, J.G. The Measurement, instrumentation and Sensors Handbook, CRC Press, 1999A702, 47
A709, 48, 91
HA7AI, 48,91
4/20™mA, 534
741,48
748, 91
A
A388, 49
‘Acceso directo a memoria, 215
Acelerdnetros eapacitivos, 239
Acoplamiento
‘capacitive, 465, 492
‘conductive, 466,473,
inductivo, 466, 492, 503
no conductive, 491
AD202, 157
‘AD620, 146, 157,
D698, 315,
‘ADT7718, 260
ADB218, 138
AD8622, 84
AGC, 151
‘Aguias de inyecciin, 45
Ajuste de tara, 21
Ajuste heuristico, 9
‘juste complejo, 10
Alcance,7, 218
Aleaciones de termopares, 364,
Aliasing, 236
Alimentacin, 49,52, 116
doble, 49,52
sinica, 49,53
‘Amplifcador, 44
aislado de tes islas, 154
hopper, 158
diferencia, 51, 94,135
de tres operacionales, 40
integrados, 138
ideal, $6, 47,48
inverse, 50
no inverser, 1
para electrometria, 416
sin derivas, 159
indice alfabético
‘operacional compensado, 91
‘operacional no compensado, 9
programable por pin, 149
Amplifcador de
aislamiento, 152
audio, 101
carga, 46,259)
corriente, 46
lectrometra, 69
entrada y salida diferencia, 136,
sganancia programable, 149
{nstrumentacién, 140
tension, 46
trans-conductancia, 46
transtesistencia, 46
Amplitud, 309
AMR, 298,
‘Analog Devices, 116
‘Ancho de bands, 23,173
a3dB,23
a ganancia unidad, 86
ddo un sistema instrumental, 24
cequivalente para ruide, 109
spectral, 402
‘Anemémetro de cazoletas, 271
‘Anemémetro de hilo caliente, 271
Anillo de guarda, 521
‘Apantallamiento, 499
‘APD, 403
Apertura de valvulas, 345
Aplicaciones analogicas, 49
Aproximacicn,
‘de Bess, 176
de Butterworth, 175,
de Chebyshev, 175
inversa de Chebyshev, 176
Aproximaciones sucesivas, 212
APS, 440,
‘Arcos eléetricos, 469
Area de bucle, 505
Area sensible, 405,
‘Atenuacin, 515,517
‘Auto-calibracion, 160
Auto-compensacion del 4rea de buce, 508,INSTRUMENTACION ELECTRONICA
564
Banda pasante, 173
Banda suprimida, 173,
Berbers pole, 296
Bardeen, 47
Barrage jamming, 469
Barrera de aislamiento, 152
Biseula, 285
Berni, 379
Bit menos significative, 218
Bloque isotérmico, 371
Bode, 23,
Brattain, 47
Brooks, 497
Brgjula,3
BI, 472
Bucle
de corriente, 538
Tipo 2,534
Tipo 3,534
Tipo, 534
de tensicn, 523
Tipo 2. 534
Tipo 3, 534
Tipo, 534
Burr Brown, 115,
Butterworth, 175
c
Cableado de alimentacion, 481
CCableado de estrella, 488,
CAG, 151
CCaidas de tonsicn, 515,
(Cajasacisticas, 172
activas, 184
Cajas de dcadas, 253
Calendar Van-Dusen, 263
CCalibracin, 21
‘a dos puntos, 21
‘aun punto, 21
‘Camara anecoiea, 511
(Camara gamma, 437
(Camino superficial, 153
(Campo cereano, 491
‘Campo de medida,7
Campo dinsmico, 13,
‘Campo Iejano, 491,509
Capacidad de entrada, 516
CCapacidades conmutadas, 199
CCapacidades pardsitas, 412
Captador, 4
(Caracterizacin, 6
‘indica, 22
cestitica, 6
(Carga nominal, 284
(Caudal, 388,
cp, 440
CCelda de carga, 283
CCelda de torsin, 285
Celda Peltier, 377, 408
CEN, 472
CENELEC, 472
Cero automatico, 159
Cero vivo, 534
CFA, 161
haf, 469
Chasis, 98
Chopper, 159
Ciclo de trabajo, 313
Cifras signiicativas, 13
Circuito de acondicionamiento, 4,43
Gircuito de Sallen Key, 183,
Circuitos con realimentacién multiple, 185
Circuitos MFB, 186
CISPR, 472
Clase de proteccion IP, 477
CMR, 94,145
CMYK, 429
Coditicador éptico, 428
Cédigos-5, 423
Coeficiente Hall, 447
Coeficiente temico, 262
de la corriente de oscuridad, 406
Colectorabierto, 217
Colorimetrotriestimslo, 430
Compatibilidad electromagnética, 472
Compatitilidad quiimica, 262, 364
Compensacién de
cerrores, 76
la unin fea, 372
offset, 77
‘operacionales, 91
Condensador
‘ikndrico, 334