Professional Documents
Culture Documents
Comsol Multyphysics: Freeze Drier: The Equilibrium Vapour Pressure Just Defined Should Look Like The Figure Below
Comsol Multyphysics: Freeze Drier: The Equilibrium Vapour Pressure Just Defined Should Look Like The Figure Below
The equilibrium vapour pressure just defined should look like the figure below:
Ice occupies the domain located at the bottom. The remaining space contains vapour
generated by sublimation. It is supposed to be close to vacuum, initially at a dry air partial
pressure p0 of 20 Pa.
A boundary heat source is added to the interface in order to handle possible external heating,
for example, by radiation. In this model, the boundary heat source is set to 5000 W/m2.
Heat Transfer in Freeze Drier
t= 0s
t=540s
t=1020s
t=1800s (Powder Form)