Professional Documents
Culture Documents
2. The spacing of the truss is 4.6 m on center. Sag rods are used in the mid points between trusses. Assume
full lateral support is applied by the roof. Use A36 steel. Assume all loads acting on the purlins to be
acting at the centroid of the purlins to prevent torsion. Spacing of purlins along the top chord is 1.40 m.
Pitch of truss = ¼ .The purlins are subjected to the following loads. (No. of purlins – round off to the next
whole number.
Snow = 1440 N/m2 of roof surface
Roofing = 288 N/m2 of roof surface
Roof Live Load = 1 KPa
Wind surface = 720 N/m2 perpendicular to the
roof surface.
Determine the diameter of sagrod and tie rods