Professional Documents
Culture Documents
Produktkatalog 12 2021 en en
Produktkatalog 12 2021 en en
2 Blades.................................................................................................................... 6
2.1 General information................................................................................................................ 6
2.2 Overview of blades............................................................................................................... 16
2.3 Product description.............................................................................................................. 25
2.4 Wild knives............................................................................................................................ 96
3 Routers.................................................................................................................97
3.1 RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s.................................................... 97
3.2 URT 300 W / PN 150/450 W................................................................................................. 108
4 Creasing wheels.................................................................................................113
4.1 CTT2 - Creasing inserts....................................................................................................... 113
4.2 CTT1 - Crease wheel without support................................................................................ 114
4.3 CTT3 - Crease wheel without support................................................................................ 115
5 Perforating knives..............................................................................................116
5.1 Vinyls................................................................................................................................... 116
5.2 Solid cardboard / Polypropylene........................................................................................ 116
5.3 Corrugated cardboard........................................................................................................ 117
5.4 Knifeholder.......................................................................................................................... 118
6 Punching bits......................................................................................................119
6.1 HSS punching bits............................................................................................................... 119
6.2 Carbide punching bits......................................................................................................... 120
6.3 Notching bit......................................................................................................................... 121
6.4 Punching pin....................................................................................................................... 121
7 Tools....................................................................................................................122
8 Cutting accessories............................................................................................123
8.1 Blade holder, flat-stock drag blade..................................................................................... 124
Imprint
8.2 Blade holder, V-cut blade.................................................................................................... 125
8.3 Blade holder, PPT blade...................................................................................................... 127
Catalog version 12/2021
8.4 EOT...................................................................................................................................... 128
Author Marketing & Communications, Zünd Systemtechnik AG
8.5 EOT-250................................................................................................................................ 129
Copyright Zünd Systemtechnik AG
3
Original Zünd accessories – the benefits
Warranty limitation
10 Plotting accessories...........................................................................................139
Rapid availability of high quality replacement parts is a decisive factor in daily operations. Only
10.1 Insert sleeves, cartridges/cartridge holders...................................................................... 139
a manufacturer with a worldwide presence like Zünd can supply original accessories in such
10.2 Cartridges............................................................................................................................ 140
little time on a global scale. And if you don‘t have a catalogue to hand, you can also find all our
accessories online at: www.zund.com.
11 Cutting and routing underlays...........................................................................141
11.1 Bulk materials..................................................................................................................... 143
1.1 Warranty limitation
11.2 Sealgrip routing underlay................................................................................................... 143
11.3 Sealgrip W routing underlay............................................................................................... 143 The type of tool used for any given operation can greatly affect cut quality. Forces and vibrations
11.4 G3-Series............................................................................................................................. 144 that occur during processing reduce both the life-cycle of tools (EOT, POT, PRT, DRT, URT etc.) and
11.5 S3-Series.............................................................................................................................. 145 the cut quality.
11.6 L3-Series.............................................................................................................................. 145
11.7 PN-Series............................................................................................................................. 146 The combination of Zünd cutters, Zünd tools and Zünd original accessories is the result of many
11.8 LC-Series............................................................................................................................. 147 years‘ intensive development work. This includes continuous input from our customers and their
11.9 P-Series............................................................................................................................... 147 applications. Zünd reserves the right to refuse warranty claims for defects in Zünd cutters caused
by the use of non-original Zünd accessories.
12 Conveyor belts...................................................................................................148
12.1 Accessories......................................................................................................................... 148
12.2 G3 series.............................................................................................................................. 148
12.3 S3 series.............................................................................................................................. 154
12.4 D3 series.............................................................................................................................. 156
12.5 PN series............................................................................................................................. 158
4 5
Blades Blades
General information General information
2.1 General information The material the blades are made from plays a major role with regard to the stability and the
life expectancy of the blade. Zünd blades are made from carbide or high speed steel. Carbide
2.1.1 Benefits at a glance
blades have a significantly higher life expectancy than high speed steel blades, but high speed
Zünd offers a broad range of quality blades, specially adapted to your cutting system and suitable steel blades are much less susceptible to impacts and vibrations that can cause the tips to break.
for all your needs. This enables you to achieve a consistently high quality standard throughout
the entire production process. Zünd blades are developed and manufactured specially by experts Tip!
to meet market requirements. Never touch carbide blades or bring them into contact with hard objects.
Your Zünd service partners will be pleased to help you choose the best blade for your needs.
Original Zünd quality
Zünd blades are produced to the highest quality standards. All Zünd blades are recognizable
through the Zünd quality seal with which they are engraved.
6 7
Blades Blades
General information General information
Zünd blades are specifically designed and sharpened to handle a wide range of materials. The There is a specified maximum cutting depth for each blade, which is determined by the length
additional specifications provided for each blade contain a list of the materials for which it can of the cutting edge. The cutting depth which can be achieved depends greatly on the Type of
be used. material. The cutting depth of some oscillating blades will be reduced when using the glide shoe.
Please remember to factor in the set depth as well as the material thickness.
Cutting angle
The cutting angle has a major influence on the cutting force. With drag blades, a narrow cutting
angle means smaller drag forces.
t Material thickness
z Set depth
Tm Cutting depth = material thickness t + set depth z
8 9
Blades Blades
General information General information
The pre-cut: x1is the distance from the centre of the axis of rotation to the first point where Depending on the cutting depth, the blade geometry will produce a different level of overcut.
the cutting edge cuts the material surface in the direction of travel. The Post-cut: x2 is the This chapter explains how to calculate your overcut based on the blade you are using and
measurement from the centre of the axis of rotation to the last point where the cutting edge the material you are cutting. The Z20 pointed oscillating blade and Z11 drag blade are used as
cuts the material surface. examples here.
The cutting angle has the greatest influence on processing quality. A narrower cutting angle may The cutting depth Tm is made up of the material thickness t and the set depth z. Insert these
enable faster cutting, but it also produces a greater overcut. A narrower cutting angle can be values into the formula as they are listed in the product description for each blade. The result will
used for paths that include large curves and long straight sections. be the pre-cut:/post-cut: in mm.
1 Material
2 Cutting underlay
t Material thickness
z Set depth
Tm Cutting depth = material thickness t + set depth z
x1 Pre-cut
x2 Post-cut
10 11
Blades Blades
General information General information
Formula x = 1.2 + 0.11 x Tm Depending on which tool they are used in, a distinction is made between the following blade
Cutting depth Tm = 10.2 mm Types:
Pre-cut: x1 = 2.322 mm
• Drag blades: used in non-powered tools such as UCT, KCT, VCT, SCT, C2, insert sleeve 40)
• Oscillating blades: used in EOT/POT oscillating tools
Sample calculation Z11 • Rotary blade: decagonal (ten-sided) blades for DRT/PRT tools
Formula x1,2 = 0.58 x Tm
Cutting depth Tm = 5,2 mm
Drag blades
Pre-cut: x1 = 3.016 mm
Post-cut: x2 = 3.016 mm Drag knives are used in combination with non-powered tools (UCT, KCT, VCT, SCT, C2).
12 13
Blades Blades
General information General information
The oscillating tool is mostly recommended for cutting thick and tough materials. The oscillating Decagonal (ten-sided) blades
motion of the blade decreases the drag force exerted on the material in the direction of travel.
However, to achieve this, the feed speed must be precisely adjusted to suit the selected
oscillating blade and oscillation frequency. Choosing the right oscillating blade depends
primarily on the contour to be cut:
• Zünd recommends flat blades for large radii, straight and large parts.
• Very sharp, pointed blades should only be used to cut small radii. The feed speed must be • Very high cutting speed
reduced to achieve a good quality cut. • Suitable for large radii, straight and/or large parts
• Recommended for breathable materials such as textile, carbon fibre, glass fibre, etc.
Flat blade (e.g. Z43) Pointed blade (e.g. Z20) • Very large overcut
14 15
Blades Blades
Overview of blades Overview of blades
2.2 Overview of blades Flat-stock blades (UCT, SCT, insert sleeve 40)
5224068 Z7 2.1 1 33
5221104 Z104 11 1 38
3910307 Z17 12 1 39
16 17
Blades Blades
Overview of blades Overview of blades
V-cut blades
4800071 Z35 5.0 1 52
Cutting Pack.
Item depth unit
Figure no. Blade [mm] (pcs.) Page
10.0/
5005642 Z70 1 44
15.6
16.0/
5006045 Z71 1 45
18.4
5222972 Z701 25 1 47
16.0/
5005572 Z73 10 47
18.2
18 19
Blades Blades
Overview of blades Overview of blades
Zünd
3910310 6.5 10 5210312 Z606 72.0 1 64
Type 6
Cutting Pack.
5201345 Z60 16.5 1 57 Item depth unit
Figure no. Blade [mm] (pcs.) Page
20 21
Blades Blades
Overview of blades Overview of blades
22 23
Blades Blades
Overview of blades Product description
Cutting Pack. Z1
Item depth unit
Item no.: 3910105 Technical information
Figure no. Blade [mm] (pcs.) Page
Pre-cut: 1.43 x Tm
Type Post-cut: -
Round-stock drag blade Max. cutting depth: 1.0 mm
4800059 Z53 2.0 1 91
Blade material: Carbide
Properties
Blade for cutting any standard self-adhesive
3910335 Z50 3.5 1 92 vinyls.
Recommended materials
• Self-adhesive vinyls
• Masking film
3910336 Z51 5.0 1 93 • Cardstock
• Pattern materials
Intended use
1.1.2 Wheel knives
Cutting Pack.
Item depth unit
Figure no. Blade [mm] (pcs.) Page
5205751 Z55 1 1 95
24 25
Blades Blades
Z2 Z3
Z2 Z3
Item no.: 3910110 Technical information Item no.: 3910115 Technical information
Pre-cut: 1.43 x Tm Pre-cut: 1.43 x Tm
Type Post-cut: - Type Post-cut: 1.43 x Tm
Round-stock drag blade Max. cutting depth: 1.0 mm Round-stock drag blade Max. cutting depth: 1.0 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade for cutting any standard self-adhesive Fine blade for creating small lettering.
vinyls. Similar to the Z1, but exerts less Stable and long-life double-edged blade.
drag force and has a shorter life expectancy.
Recommended materials
Recommended materials • Self-adhesive vinyls
• Reflective vinyls • Masking film
• Self-adhesive vinyls
• Masking film
• Cardstock
• Pattern materials
26 27
Blades Blades
Z4 W6
Z4 W6
Item no.: 3910116 Technical information Item no.: 3910154 Technical information
Pre-cut: 0.7 x Tm Pre-cut: 1.73 x Tm
Type Post-cut: - Type Post-cut: -
Round-stock drag blade Max. cutting depth: 2.1 mm Round-stock drag blade Max. cutting depth: 2.4 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Fine blade tip with small overcut; Robust all-round blade which exerts little
therefore somewhat less stable. drag force for large radii.
28 29
Blades Blades
Z5 Z6
Z5 Z6
Item no.: 3910117 Technical information Item no.: 5223298 Technical information
Pre-cut: 0.58 x Tm Pre-cut: 1. x Tm
Type Post-cut: - Type Post-cut: -
Round-stock drag blade Max. cutting depth: 2.6 mm Round-stock drag blade Max. cutting depth: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Very small overcut for vinyls and soft Blade for cutting any standard self-adhesive
materials. vinyls. Sturdy and stable knife.
30 31
Blades Blades
Z7 Z10
Z7 Z10
Item no.: 5224068 Technical information Item no.: 3910301 Technical information
Pre-cut: -0.03+0.7 x Tm Pre-cut: 0.84 x Tm
Type Post-cut: 0.1 mm Type Post-cut: 0.84 x Tm
Round-stock drag blade Max. cutting depth: 2.1 mm Flat-stock drag blade Max. cutting depth: 4.8 mm
Blade material: Carbide Blade thickness: 1.5 mm
Blade material: Carbide
Properties Properties
Blade for cutting any standard self-adhesive Stable and robust double-edged drag
vinyls in thru-cut application. Sturdy and blade. Similar to Z11, but with a larger
stable knife. overcut and longer life expectancy.
32 33
Blades Blades
Z11 Z83
Z11 Z83
Item no.: 3910309 Technical information Item no.: 5206878 Technical information
Pre-cut: 0.58 x Tm Pre-cut: 0.84 x Tm
Type Post-cut: 0.58 x Tm Type Post-cut: 0.84 x Tm
Flat-stock drag blade Max. cutting depth: 6.9 mm Flat-stock drag blade Max. cutting depth: 4.6 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Double-edged blade with universal Centric, asymmetrical drag blade for ridgefree
applications. Similar to Z10, but with a inside cutting edge.
smaller overcut and shorter life
expectancy. Recommended materials
• PVC
Recommended materials • Polycarbonate; PC
• Tarpaulin material • Folding carton
• PVC banners (frontlit/backlit) • Hard foam core
• Polypropylene; PP
• Polyester fabric; coated textiles
• Polycarbonate; PC
• Folding carton; 100 - 1500 g
• Vinyl
• Hard foam core
34 35
Blades Blades
Z101 Z16
Z101 Z16
Item no.: 5217696 Technical information Item no.: 3910306 Technical information
Pre-cut: 0.58 x Tm Pre-cut: 0.75 x Tm
Type Post-cut: 0.58 x Tm Type Post-cut: -
Flat-stock drag blade Max. cutting depth: 6.8 mm Flat-stock drag blade/ Max. cutting depth: 7.4 mm
Blade thickness: 1.5 mm Oscillating blade – pointed Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Centric, asymmetrical drag blade for ridgefree Blade for soft materials. Universally
inside cutting edge. applicable as a robust oscillating blade.
36 37
Blades Blades
Z104 Z17
Z104 Z17
Item no.: 5221104 Technical information Item no.: 3910307 Technical information
Pre-cut: 1.4 + 0.18 x Tm Pre-cut: 0.47 x Tm
Type Post-cut: - Type Post-cut: -
Flat-stock drag blade/ Max. cutting depth: 11 mm Flat-stock drag blade/ Max. cutting depth: 12 mm
Oscillating blade – flat Blade thickness: 0.63 mm Oscillating blade – pointed Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade designed for cutting thin materials, Blade for cutting thin materials. The
suitable for small radii. overcut is smaller, but the blade exerts
more drag force on the material than the
Recommended materials Z16. For best results, use as an oscillating
• Corrugated cardboard (7 mm) blade.
Recommended materials
• Magnetic material
• Polycarbonate; PC
• Polyester film
• Coating blanket
• Paper; 100 - 400 g
• Folding carton; 100 - 1500 g
38 39
Blades Blades
Z44 Z103
Z44 Z103
Item no.: 3910340 Technical information Item no.: 5219266 Technical information
Pre-cut: 0.58 x Tm Pre-cut: 0.7 x Tm
Type Post-cut: 0.58 x Tm Type Post-cut: 0.7 x Tm
Flat-stock drag blade Max. cutting depth: 14 mm Flat-stock drag blade Max. cutting depth: 14 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Double-sided blade for less tough, fibrous Double-sided blade for less tough, fibrous
materials. This blade offers similar properties materials. This blade offers similar properties
to Z11. to Z11.
40 41
Blades Blades
Z102 Z46
Z102 Z46
Item no.: 5219049 Technical information Item no.: 4800073 Technical information
Pre-cut: 1.0 x Tm Pre-cut: 1.0 x Tm
Type Post-cut: - Type Post-cut: -
Flat-stock drag blade Max. cutting depth: 7.8 mm Flat-stock drag blade Max. cutting depth: 20 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade for light, soft materials. Exerts little Blade for light, soft materials. Exerts little
drag force, but has a larger overcut. drag force, but has a larger overcut.
42 43
Blades Blades
Z70 Z71
Z70 Z71
Item no.: 5005642 Technical information Item no.: 5006045 Technical information
Max. cutting depth: Max. cutting depth:
Type 3102186: 15.6 mm Type 5206263: 11.8 mm
V-cut drag blade 5005782: 11.9 mm V-cut drag blade 5206264: 18.4 mm
Blade thickness: 0.63 mm Blade thickness: 1 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade for a 45° cut. Stable, long-life carbide blade.
44 45
Blades Blades
Z701 Z73
Z701 Z73
Item no.: 5222972 Technical information Item no.: 5005572 Technical information
Max. cutting depth: 25 mm Max. cutting depth:
Type Blade thickness: 1 mm Type blade holder: 18.2 mm
V-cut Blade material: Carbide V-cut drag blade Use for V-cut: 18.2 mm
Blade thickness:0.9 mm
Blade material: HSS
Properties Properties
Stable, long-life carbide blade. Stable high speed steel blade
46 47
Blades Blades
Z30 Z31
Z30 Z31
Item no.: 3910330 Technical information Item no.: 3910331 Technical information
Max. cutting depth: 2 mm Max. cutting depth: 2 mm
Type Blade thickness: 0.63 mm Type Blade thickness: 0.63 mm
Mat-cutting blade Blade material: Carbide Mat-cutting blade Blade material: Carbide
Properties Properties
Small mat-cutting blade for cutting straight Small mat-cutting blade; multifunctional
lines and sharp corners from the back of with two cutting edges to cut straight lines
the matboard. from the back of the matboard and radii
from the front of the matboard.
Recommended materials
• Matboard Recommended materials
• Matboard
PPT + PPT +
blade holder; up to blade holder; up to
2 mm cutting depth 2 mm cutting depth
(3960331) (3960331)
48 49
Blades Blades
Z33 Z34
Z33 Z34
Item no.: 3910333 Technical information Item no.: 3910334 Technical information
Max. cutting depth: 5 mm Max. cutting depth: 5 mm
Type Blade thickness: 0.63 mm Type Blade thickness: 0.63 mm
Mat-cutting blade Blade material: Carbide Mat-cutting blade Blade material: Carbide
Properties Properties
Large mat-cutting blade for cutting straight Large mat-cutting blade; multifunctional
lines and sharp corners on the back of the with two cutting edges to cut straight lines
matboard. from the back of the matboard and radii
from the front of the matboard.
Recommended materials
• Matboard Recommended materials
• Matboard
50 51
Blades Blades
Z35 Z16
Z35 Z16
Item no.: 4800071 Technical information Item no.: 3910306 Technical information
Max. cutting depth: 5 mm Pre-cut: 0.73 x Tm
Type Blade thickness: 0.63 mm Type Post-cut: -
Mat-cutting blade Blade material: Carbide Flat-stock drag blade/ Max. cutting depth: 7.4 mm
Oscillating blade – pointed Blade thickness: 0.63 mm
Blade material: Carbide
Properties Properties
Large mat-cutting blade for cutting straight For soft materials. Universally applicable as
lines and sharp corners from the front of a robust oscillating blade.
the matboard.
Recommended materials
Recommended materials • Folding carton; 100 - 1500 g
• Matboard • Gasket materials
• Foam
• Leather
Intended use
Intended use
PPT +
blade holder; up to
5 mm cutting depth EOT EOT-250 + POT, POT, blade holder
(3960330) blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138)
52 53
Blades Blades
Z17 Z22
Z17 Z22
Item no.: 3910307 Technical information Item no.: 3910315 Technical information
Pre-cut: 0.47 x Tm Pre-cut: 1.2 + 0.2 x Tm
Type Post-cut: - Type Post-cut: -
Flat-stock drag blade/ Max. cutting depth: 12 mm Oscillating blade – pointed Max. cutting depth: 14 mm
Oscillating blade – pointed Blade thickness: 0.63 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade for cutting thin materials. The overcut Fine, robust blade with low overcut; designed
is smaller, but the blade exerts more to cut small radii and intricate detail.
drag force than the Z16. For best results, Similar to Z20, but more robust and with a
use as an oscillating blade. larger overcut.
Intended use
Z20 Z60
Item no.: 3910313 Technical information Item no.: 5201345 Technical information
Pre-cut: 1.2 + 0.11 x Tm Pre-cut: 2.2 + 0.15 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – pointed Max. cutting depth: 14.3 mm Oscillating blade – pointed Max. cutting depth: 16.5 mm
Blade thickness: 0.63 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Very fine, delicate blade with minimal Strong blade for tough materials; similar
overcut; designed to cut small radii and to Z21.
intricate detail.
Recommended materials
Recommended materials • Saddle leather, leather
• Corrugated cardboard; B, C, BC, EB and • Rubber
E flute • Corrugated plastic
• Folding carton; 100 - 1500 g
• Light foam core
• Foam
• Ejection rubber
• Felt
Intended use
Intended use
EOT-250 POT,
blade holder
EOT EOT-250 + POT, POT, blade holder 1.5 mm
blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138)
56 57
Blades Blades
Z21 Z23
Z21 Z23
Item no.: 3910314 Technical information Item no.: 5005560 Technical information
Pre-cut: 1.6 + 0.11 x Tm Pre-cut: 1.8 + 0.1 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – pointed Max. cutting depth: 17.2 mm Oscillating blade – pointed Max. cutting depth: 22 mm
Blade thickness: 0.63 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Fine blade with low overcut; designed to Fine, long blade; designed to cut small
cut small radii and intricate detail. radii and intricate detail.
EOT EOT-250 + POT, POT, blade holder EOT EOT-250 + POT, POT, blade holder
blade holder blade holder 1.5 mm + blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/ (5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138) 0.63 mm (5003138)
58 59
Blades Blades
Z28 Z29
Z28 Z29
Item no.: 3910318 Technical information Item no.: 3910319 Technical information
Pre-cut: 1.9 + 0.07 x Tm Pre-cut: 1.9 + 0.06 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – pointed Max. cutting depth: 26 mm Oscillating blade – pointed Max. cutting depth: 31 mm
Blade thickness: 0.63 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Long oscillating blade for soft, thick Long oscillating blade for soft, thick materials.
materials. Similar to Z28, but longer.
EOT EOT-250 + POT, POT, blade holder EOT EOT-250 + POT, POT, blade holder
blade holder blade holder 1.5 mm + blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/ (5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138) 0.63 mm (5003138)
60 61
Blades Blades
Z66 Z608
Z66 Z608
Item no.: 5200479 Technical information Item no.: 5210315 Technical information
Pre-cut: 3.9 + 0.04 x Tm Pre-cut: 3.8 + 0.03 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – pointed Max. cutting depth: 55 mm Oscillating blade – pointed Max. cutting depth: 56 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: HSS
Properties Properties
Long blade with serrated cutting edge. Oscillating blade for soft foam up to 54 mm
thickness and < 45 kg/m3
Recommended materials
• Foam Recommended materials
• Insulating mat • Foam
• Corrugated cardboard – special flute
design
62 63
Blades Blades
Z606 Z604
Z606 Z604
Item no.: 5210312 Technical information Item no.: 5210310 Technical information
Pre-cut: 3.8 + 0.03 x Tm Pre-cut: 3.8 + 0.02 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – pointed Max. cutting depth: 72 mm Oscillating blade – pointed Max. cutting depth: 92 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: HSS Blade material: HSS
Properties Properties
Oscillating blade for soft foam up to 70 mm Oscillating blade for soft foam up to 90 mm
thickness and < 45 kg/m3 thickness and < 45 kg/m3
64 65
Blades Blades
Z602 Z42
Z602 Z42
Item no.: 5210306 Technical information Item no.: 3910324 Technical information
Pre-cut: 3.8 + 0.02 x Tm Pre-cut: 0.7 x Tm
Type Post-cut: - Type Post-cut: 0.80 mm
Oscillating blade – pointed Max. cutting depth: 112 mm Oscillating blade – flat Max. cutting depth: 7.8 mm
Blade thickness: 1.5 mm Blade thickness: 0.63 mm
Blade material: HSS Blade material: Carbide
Properties Properties
Oscillating blade for soft foam up to 110 mm Robust oscillating blade with small pre-cut.
thickness and < 45 kg/m3 Similar to Z26.
66 67
Blades Blades
Z42c (coated) Z43
Properties Properties
Robust oscillating blade with the same Robust oscillating blade. Similar to Z42,
geometry as Z42. The blade is specially but with smaller pre-cut and larger postcut.
coated to increase life expectancy for
leather cutting. Recommended materials
• Leather
Recommended materials • Woven materials, textiles
• Leather • Corrugated cardboard
EOT EOT-250 + POT, POT, blade holder EOT EOT-250 + POT, POT, blade holder
blade holder blade holder 1.5 mm + blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/ (5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138) 0.63 mm (5003138)
68 69
Blades Blades
Z205 Z205c
Z205 Z205c
Item no.: 5222973 Technical information Item no.: 5222976 Technical information
Pre-cut: -0.8 + 1.38 x Tm Pre-cut: -0.8 + 1.38 x Tm
Type Post-cut: 1.55 mm Type Post-cut: 1.55 mm
Oscillating blade – flat Max. cutting depth: 7 mm Oscillating blade – flat Max. cutting depth: 7.8 mm
Blade thickness: 0.63 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Robust oscillating blade. Robust oscillating blade.
70 71
Blades Blades
Z204 Z204c
Z204 Z204c
Item no.: 5221187 Technical information Item no.: 5225892 Technical information
Pre-cut: 0.67 + 0.12 x Tm Pre-cut: 0.67 + 0.12 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 8.5 mm Oscillating blade – flat Max. cutting depth: 8.5 mm
Blade thickness: 0.63 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Thin, sharp-pointed blade with minimal Robust oscillating blade with the same
overcut for cutting fine details, small radii. geometry as Z204. The blade is specially
coated to increase life expectancy for
Recommended materials leather cutting.
• Leather
Recommended materials
• Leather
EOT EOT-250 + POT, POT, blade holder EOT EOT-250 + POT, POT, blade holder
blade holder blade holder 1.5 mm + blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/ (5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138) 0.63 mm (5003138)
72 73
Blades Blades
Z26 Z82
Z26 Z82
Item no.: 3910317 Technical information Item no.: 5205519 Technical information
Pre-cut: 1.2 + 0.51 x Tm Pre-cut: 2.2 + 0.36 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 8.7 mm Oscillating blade – flat Max. cutting depth: 9.3 mm
Blade thickness: 0.63 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Simple, robust oscillating blade. Only use with strong cutting underlay
(PLP).
EOT EOT-250 + POT, POT, blade holder POT, blade holder 1.5 mm +
blade holder blade holder 1.5 mm + gliding disc (5205984) +
(5208744) 0.63 mm blade reduction 1.5/ spring insert low (3120030)
0.63 mm (5003138)
74 75
Blades Blades
Z104 Z41
Z104 Z41
Item no.: 5221104 Technical information Item no.: 3910323 Technical information
Pre-cut: 1.4 + 0.18 x Tm Pre-cut: 0.8 + 0.18 x Tm
Type Post-cut: - Type Post-cut: 1.20 mm
Flat-stock drag blade/ Max. cutting depth: 11 mm Oscillating blade – flat Max. cutting depth: 11.3 mm
Oscillating blade – flat Blade thickness: 0.63 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade designed for cutting thin materials, Oscillating blade with small pre-cut.
suitable for small radii.
EOT EOT-250 + POT, POT, blade holder EOT EOT-250 + POT, POT, blade holder
blade holder blade holder 1.5 mm + blade holder blade holder 1.5 mm +
(5208744) 0.63 mm blade reduction 1.5/ (5208744) 0.63 mm blade reduction 1.5/
0.63 mm (5003138) 0.63 mm (5003138)
76 77
Blades Blades
Z62 Z202
Z62 Z202
Item no.: 5002488 Technical information Item no.: 5209985 Technical information
Pre-cut: 0.8 + 0.21 x Tm Pre-cut: 5.5 mm
Type Post-cut: 1.20 mm Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 13.2 mm Oscillating blade – flat Max. cutting depth: 14.5 mm
Blade thickness: 0.63 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Oscillating blade with small pre-cut. Similar Oscillating blade with multifaceted
to Z41, but longer. bidirectional cutting edge for high-speed
cutting of 10 mm paper-based honeycomb/
Recommended materials corrugated display board.
• Leather
• Corrugated cardboard Recommended materials
• Woven materials, textiles • Corrugated sandwich 10 mm
• Felt
• Foam
78 79
Blades Blades
Z203 Z201
Z203 Z201
Item no.: 5210145 Technical information Item no.: 5209201 Technical information
Pre-cut: 5.5 mm Pre-cut: 6.4 mm
Type Post-cut: - Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 17 mm Oscillating blade – flat Max. cutting depth: 17.4 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Oscillating blade with multifaceted Oscillating blade with multifaceted
bidirectional cutting edge for high-speed bidirectional cutting edge for high-speed
cutting of 12.7 mm paper-based honeycomb/ cutting of 16 mm paper-based honeycomb/
corrugated display board. corrugated display board.
EOT-250 EOT-250
80 81
Blades Blades
Z61 Z63
Z61 Z63
Item no.: 5201343 Technical information Item no.: 5002637 Technical information
Pre-cut: 2.5 + 0.15 x Tm Pre-cut: 0.8 + 0.12 x Tm
Type Post-cut: - Type Post-cut: 1.20 mm
Oscillating blade – flat Max. cutting depth: 20 mm Oscillating blade – flat Max. cutting depth: 28 mm
Blade thickness: 1.5 mm Blade thickness: 0.63 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Very robust, heavy-duty oscillating blade. Oscillating blade with small pre-cut. Similar
to Z62, but longer and therefore a little
less stable.
Recommended materials
• Sandwich board Recommended materials
• Corrugated cardboard • Foam
• Corrugated plastic • Insulating mat
82 83
Blades Blades
Z68 Z69
Z68 Z69
Item no.: 5204301 Technical information Item no.: 5204302 Technical information
Pre-cut: 1.9 + 0.12 x Tm Pre-cut: 1.7 + 0.11 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 29 mm Oscillating blade – flat Max. cutting depth: 35 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: Carbide Blade material: Carbide
Properties Properties
Blade for sandwich materials Blade for sandwich materials
84 85
Blades Blades
Z607 Z64
Z607 Z64
Item no.: 5210317 Technical information Item no.: 5002739 Technical information
Pre-cut: 3.8 + 0.03 x Tm Pre-cut: 3.5 + 0.03 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 56 mm Oscillating blade – flat Max. cutting depth: 57 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: HSS Blade material: HSS
Properties Properties
Oscillating blade for soft foam up to 54 mm Cost-effective blade for soft, thick materials.
thickness and < 45 kg/m3 Short life expectancy!
86 87
Blades Blades
Z605 Z603
Z605 Z603
Item no.: 5210319 Technical information Item no.: 5210320 Technical information
Pre-cut: 3.8 + 0.03 x Tm Pre-cut: 3.8 + 0.02 x Tm
Type Post-cut: - Type Post-cut: -
Oscillating blade – flat Max. cutting depth: 72 mm Oscillating blade – flat Max. cutting depth: 92 mm
Blade thickness: 1.5 mm Blade thickness: 1.5 mm
Blade material: HSS Blade material: HSS
Properties Properties
Oscillating blade for soft foam up to 70 mm Oscillating blade for soft foam up to 90 mm
thickness and < 45 kg/m3 thickness and < 45 kg/m3
88 89
Blades Blades
Z601 Z53
Z601 Z53
Item no.: 5209223 Technical information Item no.: 4800059 Technical information
Pre-cut: 3.8 + 0.02 x Tm Max. cutting depth: 2.0 mm
Type Post-cut: - Type Blade thickness: 0.6 mm
Oscillating blade – flat Max. cutting depth: 112 mm Rotary blade Blade material: Carbide
Blade thickness: 1.5 mm
Blade material: HSS
Properties Properties
Oscillating blade for soft foam up to 110 mm Driven round-knife for cutting of single-layer
thickness and < 45 kg/m3 textiles.
90 91
Blades Blades
Z50 Z51
Z50 Z51
Item no.: 3910335 Technical information Item no.: 3910336 Technical information
Max. cutting depth: 3.5 mm Max. cutting depth: 5.0 mm
Type Blade thickness: 0.6 mm Type Blade thickness: 0.6 mm
Rotary blade Blade material: Carbide Rotary blade Blade material: Carbide
Properties Properties
Decagonal (10-sided) blade similar to Z51/ Decagonal (10-sided) blade.
Z52, but with smaller overcut and greater
cutting force.
Recommended materials
Recommended materials • Textiles
• Textiles • Technical textiles
• Technical textiles • Carbon fibre
• Carbon fibre • Glass fibre
• Glass fibre • Aramid fibre
• Aramid fibre
92 93
Blades Blades
Z52 Z55
Z52 Z55
Item no.: 3910337 Technical information Item no.: 5205751 Technical information
Max. cutting depth: 7.0 mm Max. cutting depth: 1 mm (single-layer)
Type Blade thickness: 0.6 mm Type Blade thickness: 0.3 mm
Rotary blade Blade material: Carbide Wheel knife Blade material: HSS
Properties Properties
Decagonal (10-sided) blade similar to Z50/ Only use with a special PU cutting underlay.
Z51, but with larger overcut and lower
cutting force. Recommended materials
• Technical textiles (PES, PVC, etc.)
Recommended materials • Carbon fibre
• Textiles • Glass fibre
• Technical textiles
• Carbon fibre
• Glass fibre
• Aramid fibre
94 95
Blades Routers
Wild knives RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s
RM-A QC ARC
3910161 WILD type 4 30/55° single-edged
Max. rpm
RM-A QC
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
R45-s
RM-A
RM-S
RM-L
Type
3910322 Z40 HSS for EOT/POT tools
96 97
Routers Routers
RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s
3.1.2 Zünd multipurpose router bits coated1,2,3 3.1.4 Zünd ACM router1
RM-A QC ARC
RM-A QC ARC
Schneiden
Max. rpm
Max. rpm
RM-A QC
RM-A QC
D1 [mm]
D2 [mm]
Item no.
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
L1 [mm]
L2 [mm]
Cutting
Special
Special
R45-s
RM-A
R45-s
RM-A
RM-S
RM-S
RM-L
RM-L
Type
Type
5218133 R502 2 6 1 58 6 50000 - • • • • • 5212027 R207 2 6 1 58 6 50000 - • • • • •
5218135 R503 3 6 1 58 11 50000 - • • • • • 5212028 R208 3 6 1 58 8 50000 - • • • • •
5218137 R504 4 6 1 58 14 50000 - • • • • • 5212030 R209 4 6 1 58 8 50000 - • • • • •
5218139 R505 5 6 1 58 16 50000 - • • • • • 5212253 R207-A 2 6 1 58 6 50000 A-Version •
5218141 R506 6 6 1 58 22 50000 - • • • • • 5212254 R208-A 3 6 1 58 8 50000 A-Version •
5218134 R502-A 2 6 1 58 6 50000 A-Version • 5212255 R209-A 4 6 1 58 8 50000 A-Version •
5218136 R503-A 3 6 1 58 11 50000 A-Version •
1
Specific router for ACM (aluminum composite material), as Dibond, IGEPA Bond Premium, Basic
5218138 R504-A 4 6 1 58 14 50000 A-Version •
IGPA, Alucobond, Reynobond, Dibond Digital, Dilite.
5218140 R505-A 5 6 1 58 16 50000 A-Version •
5218142 R506-A 6 6 1 58 22 50000 A-Version •
RM-A QC
L3 [mm]
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
R45-s
RM-A
RM-S
RM-L
Type
1
Acrylic, aluminum, Dibond, Forex, MDF, Pertinax, and plastics like PET, PP, PE, PVC-U, PS.
2
Routers specially developed for Zünd Cutters. Suitable for hard as well as soft materials.
3
Dry processing of aluminum (without Minimal Quantity Lubrication MQL).
98 99
Routers Routers
RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s
RM-A QC ARC
RM-A QC ARC
Max. rpm
Max. rpm
RM-A QC
RM-A QC
D1 [mm]
D2 [mm]
D1 [mm]
D2 [mm]
Item no.
Item no.
L1 [mm]
L2 [mm]
L1 [mm]
L2 [mm]
Cutting
Cutting
Special
Special
R45-s
R45-s
RM-A
RM-A
RM-S
RM-S
RM-L
RM-L
Type
Type
3910742 R102 2 6 1 50 6 50000 - • • • • 3910762 R112 2 6 1 50 6 50000 - • • • •
3910738 R108 3 6 1 50 6 50000 - • • • • 3910761 R153 3 6 1 50 6 50000 - • • • •
3910743 R103 3 6 1 50 11 50000 - • • • • 3910763 R113 3 6 1 50 11 50000 - • • • •
3910739 R109 4 6 1 50 6 46600 - • • • • 3910709 R154 4 6 1 50 8 46600 - • • • •
3910744 R104 4 6 1 50 14 46600 - • • • • 3910764 R114 4 6 1 50 12 46600 - • • • •
3910793 R170 4 6 1 50 22 46600 - • • • • • 3910795 R157 4 6 1 50 14 46600 - • • • •
3910773 R173 5 6 1 50 16 37200 - • • • • 3910796 R158 4 6 1 50 22 46600 - • • • • •
3910794 R171 5 6 1 58 22 37200 - • • • • • 3910758 R115 5 6 1 50 16 37200 - • • • •
3910740 R101 6 6 1 50 12 31000 - • • • • 3910797 R159 5 6 1 58 22 37200 - • • • • •
3910741 R100 6 6 1 58 22 31000 - • • • • 3910759 R116 6 6 1 58 22 31000 - • • • •
3910798 R172 6 6 1 64 32 31000 - • • • • • 3910771 R117 6 6 1 56 28 31000 - • • •
left-hand 3910710 R156 6 6 1 64 32 31000 - • • • •
3910747 R123 3 6 1 50 11 50000 • • • • •
spiral bits
left-hand
3910767 R133 3 6 1 50 11 50000 • • • • •
left-hand spiral bits
3910748 R124 4 6 1 50 12 46600 • • • • •
spiral bits
left-hand
3910768 R134 4 6 1 50 14 46600 • • • • •
left-hand spiral bits
3910749 R125 5 6 1 50 12 37200 • • • • •
spiral bits
left-hand
3910769 R135 5 6 1 50 16 37200 • • • • •
left-hand spiral bits
3910750 R126 6 6 1 60 22 31000 • • • • •
spiral bits
left-hand
3910770 R136 6 6 1 60 22 31000 • • • • •
left-hand spiral bits
5211741 R123-A 3 6 1 50 11 50000 spiral bits, •
left-hand
A-Version
5211744 R133-A 3 6 1 50 11 50000 spiral bits, •
left-hand A-Version
5211742 R124-A 4 6 1 50 12 46600 spiral bits, •
left-hand
A-Version
5211745 R134-A 4 6 1 50 14 46600 spiral bits, •
left-hand A-Version
5211743 R126-A 6 6 1 60 22 31000 spiral bits, •
left-hand
A-Version
5211746 R136-A 6 6 1 60 22 31000 spiral bits, •
A-Version
100 101
Routers Routers
RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s
RM-A QC ARC
L1 L1
Max. rpm
RM-A QC
D1 D2 D1 D2
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
R45-s
RM-A
RM-S
RM-L
Type
L2 L2
RM-A QC ARC
3910729 R121 3 3 2 75 25 - 2-flute • •
Max. rpm
RM-A QC
Brackets
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
5211644 R219 6 6 2 85 40 48000 2-flute •
R45-s
RM-A
RM-S
RM-L
Type
5211645 R220 6 6 2 90 53 25000 2-flute •
2-flute, Acrylic,
5211733 R118-A 6 6 2 75 27 48000 • • 3910506 E6 6 6 1 50 2.7 92° 50000 • • • • •
A-Version plastic
2-flute, Acrylic,
5211734 R219-A 6 6 2 85 40 48000 • • 3910507 E7 6 6 1 50 4.7 60° 50000 • • • • •
A-Version plastic
2-flute, Acrylic,
5211735 R220-A 6 6 2 90 53 25000 • • 3910508 E8 6 6 1 50 7.5 40° 50000 • • • • •
A-Version plastic
5211747 E6-A 6 6 1 50 2.7 92° 50000 A-Version •
5211748 E7-A 6 6 1 50 4.7 60° 50000 A-Version •
5211749 E8-A 6 6 1 50 7.5 40° 50000 A-Version •
102 103
Routers Routers
RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s
L2 L2 L2 L2
RXXX-A with stop ring (A-Version) RXXX-A with stop ring (A-Version)
RM-A QC ARC
RM-A QC ARC
Max. rpm
RM-A QC
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
Radius
Max. rpm
RM-A QC
Brackets
R45-s
RM-A
D1 [mm]
D2 [mm]
Item no.
RM-S
RM-L
L1 [mm]
L2 [mm]
Type
Cutting
Special
R45-s
RM-A
RM-S
RM-L
Type
5213150 R210 6 6 2 50 2 2.0 50000 - • • • • •
5213152 R211 10 6 2 50 4 4.0 50000 - • • • • • Acrylic,
3910760 R140 10 6 1 44.5 4.1 90° 20000 • • •
Dibond
5213151 R210-A 6 6 2 50 2 2.0 50000 A-Version •
Acrylic,
3910799 R141 10 6 2 50 4 90° 40000 • • • • •
5213153 R211-A 10 6 2 50 4 4.0 50000 A-Version • Dibond
Acrylic,
5211751 R141-A 10 6 2 50 4 90° 40000 Dibond, •
A-Version
RM-A QC ARC
Max. rpm
RM-A QC
Brackets
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
R45-s
RM-A
RM-S
RM-L
Typ
522644 R602 11 8 2 51 2.9 120° 50000 Dibond •
104 105
Routers Routers
RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s RM-L / RM-A / RM-A QC / RM-A QC ARC / RM-S / R45-s
RM-A QC ARC
Max. rpm
RM-A QC
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
R45-s
RM-A
RM-S
RM-L
Type
RM-A QC ARC
Max. rpm
RM-A QC
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
3910452 R62 2.4 1/8“ 2 38 10 - Pertinax •
R45-s
RM-A
RM-S
RM-L
Type
Acrylic,
3910780 P106 6 6 1 50 6 41000 Diamond- • • • • •
polisher
Acrylic,
5211750 P106-A 6 6 1 50 6 41000 •
A-Version
Acrylic,
Poly-
5214210 P201 5.5 6 1 60 16 50000 cristalline • • • • •
Diamond-
polisher
Acrylic,
Poly-
cristalline
5214211 P201-A 5.5 6 1 60 16 50000 •
Diamond-
polisher
A-Version
106 107
Routers Routers
URT 300 W / PN 150/450 W URT 300 W / PN 150/450 W
PN 150/450 W
L1
Max. rpm
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
D1 D2
Type
URT
L2
PN 150/450 W
left hand
Max. rpm
3910754 R73 2 3 1 38 6 80000 • •
D1 [mm]
D2 [mm]
Item no.
spiral bits
L1 [mm]
L2 [mm]
Cutting
Special
Type
left hand
URT
3910757 R76 3 3 1 38 11 63600 • •
spiral bits
3910730 R40 1 3 1 38 4 80000 - • • 3910715 R15 0.6 1/8“ 1 38 2.5 - - •
3910734 R41 2 3 1 38 6 80000 - • • 3910716 R16 1 1/8“ 1 38 4 - - •
3910735 R42 3 3 1 38 6 62000 - • • 3910717 R17 1.2 1/8“ 1 38 5 - - •
3910737 R43 3 3 1 38 11 62000 - • • 3910711 R11 1.6 1/8“ 1 38 5.5 - - •
left hand 3910712 R12 2 1/8“ 1 38 9.5 - - •
3910700 R5 2 3 1 38 4 80000 • •
spiral bits
3910713 R13 2.4 1/8“ 1 38 9.5 - - •
left hand
3910736 R44 3 3 1 38 6 62000 • • 3910714 R14 3 1/8“ 1 38 9.5 - - •
spiral bits
3910705 R25 0.6 1/8“ 2 38 3 - 2-flute • 3910720 R52 4 4 1 50 12 46600 - •
108 109
Routers Routers
URT 300 W / PN 150/450 W URT 300 W / PN 150/450 W
PN 150/450 W
D1 D2
Max. rpm
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
L2
Type
URT
3910424 R34 1 3 3 38 3 - 3-flute •
PN 150/450 W
3910421 R31 1.5 3 3 38 5 - 3-flute •
Max. rpm
Brackets
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
3910422 R32 2 3 3 38 6 - 3-flute •
Cutting
Special
Type
3910425 R35 2.5 3 3 38 7 - 3-flute •
URT
3910423 R33 3 3 3 38 9 - 3-flute •
Engraving
3910503 E3 3 3 1 38 3.9 36° - • •
plates
Acrylic,
3910509 E9 3 3 1 38 2.1 60° - • •
Plastic
Acrylic,
3910501 E1 3 3 1 38 1.3 90° - • •
Plastic
3910502 E2 3 3 1 38 1.3 90° - Brass • •
Acrylic,
3910505 E5 3 1/8“ 1 38 2.1 60° - •
Plastic
Acrylic,
3910504 E4 3 1/8“ 1 38 1.3 90° - •
Plastic
110 111
Routers Creasing wheels
URT 300 W / PN 150/450 W CTT2 - Creasing inserts
D1 D2
L2
PN 150/450
Max. rpm
D1 [mm]
D2 [mm]
Item no.
L1 [mm]
L2 [mm]
Cutting
Special
Type
URT
Creasing width
wheel [mm]
Depth [mm]
Width [mm]
Ø Creasing
3910452 R62 2.4 1/8“ 2 38 10 - Pertinax •
Item no.
Notice
[point]
Type
3910603 C201 24 4 1.5 1.0 Cardboard 250-400 g/m² without
3910604 C202 24 4 1.5 1.5 creasing matrix
112 113
Creasing wheels Creasing wheels
CTT1 - Crease wheel without support CTT3 - Crease wheel without support
4.2 CTT1 - Crease wheel without support 4.3 CTT3 - Crease wheel without support
wheel [mm]
Ø Creasing
Item no.
Catch R
Notice
Angle
Type
wheel [mm]
Ø Creasing
5005632 C101 61 0.5 5° corrugated cardboard < 4.5 mm
Item no.
Catch R
Notice
Angle
5005633 C102 61 0.5 10° corrugated cardboard < 4.5 mm
Type
5005634 C103 61 0.5 15° corrugated cardboard < 4.5 mm
5205823 C301 90 1.0 15°
5205824 C302 90 0.5 15° Dual-layer corrugated
5210477 C303 90 3 20° cardboard > 4.5 mm
114 115
Perforating knives Perforating knives
Vinyls Corrugated cardboard
P114
5212384 1.5 1.8 1.1
8 TPI
P111
5212381 0.7 0.3 1.1
25 TPI
P112
5212382 1.1 0.5 1.1
17 TPI
P115
5212385 3.0 3.0 4.0
4 TPI
P113
5212383 1.1 1.0 1.1
12 TPI
116 117
Perforating knives Punching bits
Knifeholder HSS punching bits
3999211 0.5 7
P117
5212387 7.0 5.0 4.0
2 TPI
3999213 0.8 7
3999201 1 7
3999200 1.2 7
3999203 2 7
3999204 2.5 7
3999205 3 7
5.4 Knifeholder
3999206 3.5 7
Item
Figure no. Item
3999207 4 7
3999208 4.5 7
3999210 5.5 7
118 119
Punching bits Punching bits
Carbide punching bits Notching bit
3999101 1 4.5
3999103 2 4.5
3999105 3 7
3999109 5 7
3999111 4.5
3999112 7
120 121
Tools Cutting accessories
Punching pin Punching pin
3120133 UDT [Pen insert sleeve 40 for Tz-module] 5212508 Knife adjustment tool EOT-250 / POT, 1.5 mm
122 123
Cutting accessories Cutting accessories
Blade holder, flat-stock drag blade Blade holder, V-cut blade
8.1 Blade holder, flat-stock drag blade 8.2 Blade holder, V-cut blade
124 125
Cutting accessories Cutting accessories
Blade holder, V-cut blade Blade holder, PPT blade
126 127
Cutting accessories Cutting accessories
EOT EOT-250
5204325 Bearing
128 129
Cutting accessories Cutting accessories
Glide shoes Glide shoes
130 131
Cutting accessories Cutting accessories
Glide shoes KCM-S, KCT, C2-, C2-P-modular tool heads
Gliding shoe, 8 mm deflection path with blade holder for KCM-S, C2, C2-P tool head
3120028 3120011
large slot for Tz module (for vinyl blades)
132 133
Routing accessories Routing accessories
Collets HSK-E 25, 3.6 kW milling spindle Collets, 1 kW milling spindle, QC
ER16, Ø 6 mm,
5812613 9.4 Collets, 300 W milling spindle
for shank diameter 5.0 - 6.0 mm
1527491 Ø 2.5 mm
3910497 Ø 1/4 " (6.35mm)
3910491 Ø 3.0 mm
3910498 Ø 3.0 mm
3910493 Ø 4.0 mm
3910499 Ø 4.0 mm
3910496 Ø 6.0 mm
134 135
Routing accessories Routing accessories
Consumables Consumables
9.6 Consumables
Figure Item no. Description
Figure Item no. Description
Glide shoe for suction bell (RM-A) [R-/R45-
3621210
module]
136 137
Routing accessories Plotting accessories
Consumables Insert sleeves, cartridges/cartridge holders
10 Plotting accessories
Figure Item no. Description
10.1 Insert sleeves, cartridges/cartridge holders
Router bit holder silver, Ø 9.0 mm, Figure Item no. Description
5210057
(ARC RM-A QC) Insert sleeve for long-life cartridge (Super
3910223
Giant)
138 139
Plotting accessories Cutting and routing underlays
Cartridges Cartridges
140 141
Cutting and routing underlays Cutting and routing underlays
Cartridges Bulk materials
142 143
Cutting and routing underlays Cutting and routing underlays
G3-Series S3-Series
Cutting underlay PLP Cutting underlay PU cutting underlay Cutting underlay PLP Cutting underlay Cutting underlay
(anthracite) S (anthracite) coated red (anthracite) S (anthracite) ST (brown)
Cutter Item no. Quantity Item no. Quantity Item no. Quantity Cutter Item no. Quantity Item no. Quantity Item no. Quantity
3XL-3200 3930006 12 3930208 1 - - Cutter Item no. Quantity Item no. Quantity Item no. Quantity
144 145
Cutting and routing underlays Cutting and routing underlays
PN-Series LC-Series
Cutting underlay PLP Cutting underlay Cutting underlay Cutting underlay PLP Cutting underlay Cutting underlay
(anthracite) S (anthracite) ST (brown) (anthracite) S (anthracite) S (anthracite) 4.0 mm
Cutter Item no. Quantity Item no. Quantity Item no. Quantity Cutter Item no. Quantity Item no. Quantity Item no. Quantity
XL-1200 3912138 4 3912158 1 3912133 1 Cutter Item no. Quantity Item no. Quantity
3XL-3000 - - 3912186 1 - -
146 147
Conveyor belts Conveyor belts
Accessories G3 series
5211233 Conveyor assembly glue, 50 ml (includes mixing jets and spatula) 3923003 Conveyor belt, M-2500 + M-CE1250
3913000 Special conveyor assembly glue 3923004 Conveyor belt, M-2500 + M-CE2500
3110997 Special fabric tape, 50 mm wide, 5 m long 3923013 Conveyor belt, M-2500 + M-CE1250 + M-CE1250
3923058 Conveyor belt, M-1600 + M-CE1600 + M-CE800 3923005 Conveyor belt, L-2500 + L-CE1250
3923059 Conveyor belt, M-1600 + M-CE1600 3923006 Conveyor belt, L-2500 + L-CE2500
3923060 Conveyor belt, M-1600+M-CE1600+M-CE1600 3923016 Conveyor belt, L-2500 + L-CE1250 + L-CE1250
148 149
Conveyor belts Conveyor belts
G3 series G3 series
3923008 Conveyor belt, L-3200 + L-CE1600 3923011 Conveyor belt, XL-3200 + XL-CE1600
3923009 Conveyor belt, L-3200 + L-CE3200 3923012 Conveyor belt, XL-3200 + XL-CE3200
3924083 Conveyor belt, L-3200 + L-CE3500 3924086 Conveyor belt, XL-3200 + XL-CE3500
3923019 Conveyor belt, L-3200 + L-CE1600 + L-CE1600 3923022 Conveyor belt, XL-3200 + XL-CE1600 + XL-CE1600
3923020 Conveyor belt, L-3200 + L-CE3200 + L-CE3200 3923023 Conveyor belt, XL-3200 + XL-CE3200 + XL-CE3200
3924085 Conveyor belt, L-3200 + L-CE3500 + L-CE3500 3924088 Conveyor belt, XL-3200 + XL-CE3500 + XL-CE3500
3923021 Conveyor belt, L-3200 + L-CE1600 + L-CE3200 3923024 Conveyor belt, XL-3200 + XL-CE1600 + XL-CE3200
3924084 Conveyor belt, L-3200+L-CE3500+L-CE1600 3924087 Conveyor belt, XL-3200 + XL-CE1600 + XL-CE3500
12.2.7 2XL-1600
12.2.5 XL-1600
Item no. Item
Item no. Item 3923031 Conveyor belt, 2XL-1600
3923025 Conveyor belt, XL-1600
3923032 Conveyor belt, 2XL-1600 + 2XL-CE800
3923026 Conveyor belt, XL-1600 + XL-CE800
3923036 Conveyor belt, 2XL-1600 + 2XL-CE1600
3923030 Conveyor belt, XL-1600 + XL-CE1600
3923033 Conveyor belt, 2XL-1600 + 2XL-CE800 + 2XL-CE800
3923027 Conveyor belt, XL-1600 + XL-CE800 + XL-CE800
3923035 Conveyor belt, 2XL-1600 + 2XL-CE1600 + 2XL-CE1600
3923029 Conveyor belt, XL-1600 + XL-CE1600 + XL-CE1600
3923034 Conveyor belt, 2XL-1600 + 2XL-CE800 + 2XL-CE1600
3923028 Conveyor belt, XL-1600 + XL-CE800 + XL-CE1600
150 151
Conveyor belts Conveyor belts
G3 series G3 series
3923038 Conveyor belt, 2XL-3200 + 2XL-CE1600 3923064 Conveyor belt, 3XL-2500 + 3XL-CE1250
3923042 Conveyor belt, 2XL-3200 + 2XL-CE3200 3923065 Conveyor belt, 3XL-2500 + 3XL-CE2500
3924089 Conveyor belt, 2XL-3200 + 2XL-CE3500 3923066 Conveyor belt, 3XL-2500 + 3XL-CE1250 + 3XL-CE1250
3923039 Conveyor belt, 2XL-3200 + 2XL-CE1600 + 2XL-CE1600 3923067 Conveyor belt, 3XL-2500 + 3XL-CE2500 + 3XL-CE1250
3923041 Conveyor belt, 2XL-3200 + 2XL-CE3200 + 2XL-CE3200 3923068 Conveyor belt, 3XL-2500 + 3XL-CE2500 + 3XL-CE2500
3923044 Conveyor belt, 3XL-1600 + 3XL-CE800 3923051 Conveyor belt, 3XL-3200 + 3XL-CE1600 + 3XL-CE1600
3923048 Conveyor belt, 3XL-1600 + 3XL-CE1600 3923053 Conveyor belt, 3XL-3200 + 3XL-CE3200 + 3XL-CE3200
3923045 Conveyor belt, 3XL-1600 + 3XL-CE800 + 3XL-CE800 3924094 Conveyor belt, 3XL-3200 + 3XL-CE3500 + 3XL-CE3500
3923047 Conveyor belt, 3XL-1600 + 3XL-CE1600 + 3XL-CE1600 3923052 Conveyor belt, 3XL-3200 + 3XL-CE1600 + 3XL-CE3200
3923046 Conveyor belt, 3XL-1600 + 3XL-CE800 + 3XL-CE1600 3924093 Conveyor belt, 3XL-3200 + 3XL-CE3500 + 3XL-CE1600
152 153
Conveyor belts Conveyor belts
S3 series S3 series
12.3.6 XL-1200
12.3.3 M-1600
12.3.4 L-1200
154 155
Conveyor belts Conveyor belts
D3 series D3 series
12.4 D3 series
Item no. Item
12.4.1 L-3200
3937016 Conveyor belt, D3 2XL-3200 + 2XL-CE-1600 + 2XL-CE1600
Item no. Item
3937017 Conveyor belt, D3 2XL-3200 + 2XL-CE-3500 + 2XL-CE3500
3937001 Conveyor belt, D3 L-3200
3937018 Conveyor belt, D3 2XL-3200 + 2XL-CE-1600 + 2XL-CE3500
3937002 Conveyor belt, D3 L-3200 + L-CE1600
12.4.3 2XL-3200
156 157
Conveyor belts Conveyor belts
PN series PN series
3913011 Conveyor without CVE 3913050 Conveyor with CVE-12 – one side
12.5.6 L-1200
Item no. Item 3913039 Conveyor without CVE < Serial number: L12009
3913021 Conveyor without CVE 3913033 Conveyor without CVE > Serial number: L12008
3913073 Conveyor with CVE-08 – one side 3913051 Conveyor with CVE-12 – one side
3913054 Conveyor with CVE-12 – one side 3913034 Conveyor with CVE-12 – both sides
12.5.3 M-1200
12.5.7 LR-1600
Item no. Item
Item no. Item
3913023 Conveyor without CVE
3913048 Conveyor without CVE
3913132 Conveyor with CVE-08 – one side
3913074 Conveyor with CVE-12 – one side
3913055 Conveyor with CVE-12 – one side
3913056 Conveyor with CVE-16 – one side
12.5.4 M-1600
158 159
Conveyor belts Conveyor belts
PN series PN series
3913037 Conveyor without CVE < Serial no. L25007 3913043 Conveyor without CVE
3913038 Conveyor without CVE > Serial no. L25006 3913053 Conveyor with CVE-12 – one side
3913066 Conveyor with CVE-12 – one side 3913088 Conveyor XL-1200 + CVE-12 + CVE-12
3913086 Conveyor with CVE-30 – both sides 3913064 Conveyor with CVE-25 – one side
160 161
Conveyor belts
PN series
12.5.15 XL-3000
12.5.16 2XL-3000
Item no. Item
12.5.17 3XL-3000
Zünd Systemtechnik AG
Industriestrasse 8
CH-9450 Altstätten
T +41 71 554 81 00
info@zund.com
www.zund.com
162