Professional Documents
Culture Documents
Applied Physics
(Lab)
Lab Task #6
1. Title Of Experiment
Clamper Diode
3. Hardware Components
AC Power Source
Capacitor (100F)
Diode (1N3493)
Resistor (2kΩ)
Wires
Oscilloscope
Ground
4. Procedure:
Open a multisim.
Take an AC Power source of 120 Vrms.
Connect AC Power source with diode.
Place a diode (vertically upward for positive clamper or
vertically downward for negative clamper)
Take a resistor and connect one end of resistor with diode
and another end with AC power source.
Applied Physics (Lab) BSCS-1C SZABIST-ISB
Ground the circuit.
Now apply oscilloscope across the ends of resistor.
Check the final graph.
5. Multisim Screenshot
Positive Clamper
Negative Clamper
6. Hardware Screenshot