List of ME Shut down and slow down
Non-cancallable shut dvr
+ Pump inletoll pressure, low
Ifthe pump inlat presstre drops to set value (default
‘a ron-cancelable shut down
+ Hydraulic low pressure sensors failed
Incase al pressure senso al the low pressure part of hydraulic system fis the ME
ECS releases a non-cancelable shut down,
Vaid for software version 1.34 and later
‘+ Hydraulic high pressure fais during running engine
Ifthe high pressure drops to this value default = *) and the engine isrunning the ME
ECS releases a non-cancelable shut down,
*) default =135 bar for 200 bar hydraulic systems and default =180 bar for 200 bar
hydraulic systems,
\Vald for software version 1.34 and later
Sar) tbe ME ECS releases
CCancelable shut down:
+ Leakage from hydraulic unt, high evel
Ifthe leak flow from the hytrauic unit increase to set value (default = 45min the ME
ECS releases a cancelable shut down
+ Leakage fom hyerautc unt, alarm time out (option normally not used)
If alarm for leak tlw from the hydraulic unit remains for a set period (default= 60
‘seconis) the ME ECS releases a cancelable shut down,
‘+ WHR/Shat generator disconnection failed dunng slow down,
Ifthe WHR#shah generator is not disconnected within a set time (detaul
‘seconds) aftr slow down the ME ECS releases a cancelable shut down.
(Option for plans with WHRIshat generator
Stow down:
++ ME cylinder lubricator failure
In cage ME cylinder lubricator falls the ME ECS release slow down request
+ Noextaust valve movement (misting),