Seat No. Enrolment No.
GUJARAT TECHNOLOGICAL UNIVERSITY
ME ~ SEMESTER - Il (New) EXAMINATION ~ WINTER-2019
Subject Code: 3721302 Date: 18-11-2019
Subject Name: Pavement Design, Construction and Evaluation
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1, Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Describe the structural difference between the concrete and bituminous
Pavements.
(b) Explain types of failures in flexible pavements
Q.2. (a) Describe road construction in desert.
(b)_ Explain the CBR method of pavement design. How is this method usefill to
determine thickness of components layers?
‘OR
(b) Calculate the stress developed at the interior, edge and comer regions of a cement
concrete pavement using Westergaard’s stress theory with following data.
Wheel load = 5000 kg/m?
‘Young’s modulus of conerete = 3 X 10° kg/m?
Pavement thickness = 20 em
Poisson’s ratio = 0.15
Modulus of sub grade reaction = 6 kg/m’
6. Radius of contact area = 20 em.
peepee
Q3 (a) Explain the graphical method for determination of ESWL.
(b) Explain types of joints in C.C. pavement.
OR
Q.3 (a) Calculate fifteen year EWL and TI values using following AADT data. Assume
60 % increase in traffic in 20 years period.
No. of Axle AADT EWL
(Two Dimension) (constant)
2 400 450
3 350 1100
4 200 2500
5 80 5000
(b) What are the types of overlay? Explain any one in detail.
Q.4 (a) What is the difference between highways and runways stress analysis for
pavements?
(b) Explain Marshal stability test?
OR
Q.4 (a) What are Lane Distribution Factor (LDF) and Direction Distribution Factor
(DDF)? What are the recommendations given in IRC-37, 2001 for LDF and
DDF?
(b) What is VDF? The standard single axle load 8.2 tonnes spectrum from a survey.
data is presented in the following table. Find the values of VDF.
Page 1 of 2
07
07
07
07
07
07
07
07
07
07
07
07
07Q5 (a)
(b)
Q5 (a)
(b)
‘Axle load range | Percentage
(Tonnes) Frequenc
17-15 03
15-13 18,
13-11 23
11-09 37
09-07 12
07-05 07
Describe Benkelman Beam test.
Discuss briefly importance of Highway Maintenance and its need
OR
What are the IRC guidelines for the joint spacing?
What is vehicular damage factor? Explain its significance in design of pavement.
Page 2 of 2
07
07
07
07