Professional Documents
Culture Documents
Document title
Date
Toolbox Talk Record
Revision Page
1 of 2
Task Description: Welding & Cutting of cable duct support – Re- Date\Time 01.04.2016/ 13:30 Lt
adjustment
Welding machine to be checked/ inspected prior to operation. Routing of cables to be inspected prior to start the operation.
Use of safety harness. Prior to operations check if the safety harness had it’s annual inspection and is not out of date.
Fire Watch appointed and briefed. Fire extinguisher to be available on site area. All involved personnel should pass through to “USE of
POWER TOOL’s MANUAL”. Grinder to be fitted with protection cover.
Good housekeeping to be ensure, area tidiness to be applied at completion of the job. Bridge to be notified for each stage of the job.
Mandatory use of eye protection! Follow Swire PPE matrix for this specific task. Use of flame protected lifejacket!
All flammable materials to be removed and adjacent spaces checked. Warning notice for welding to be in place.
Barriers to be fenced, and access should be restricted in that area. Escape routes to be assessed.
I know the hazards involved and controls required to make the job safe.
I have read and will follow the procedures relevant to my participation in the job.
2. Name Signature
Task to be undertaken, risks and risks reducing
3. Name Signature
measures.
4. Name Signature
Personnel protective equipment.
5. Name Signature
Accidents and near misses that have occurred.
6. Name Signature
Emergency plans dealing with specific
7. Name Signature
equipment/projects.
8. Name Signature
Orderliness and cleanliness.
9. Name Signature
Permit to Work and other procedures.
Risk assessments. 10. Name Signature
All new persons joining the work party to be given a Persons new to task: 3.
through handover and referred to this card.
1. 4.
2. 5.
Position: Date:
Name: Signature:
Date
Toolbox Talk Record
Revision Page
2 of 2