A testbook.com
Pea) Rec aR eres
Start Complete Exam Preparation
Ro
re. ocd f Teac
MasterClasses Creag
Download App
Question View this Question Online >
Cooling tower is used to:
This question was previously asked in
tps cue ane ct)
Held on March 2020
View all APPSC Polytechnic Lecturers Papers >
1. Cool the space or room
2. Cool the hot water coming from the condenser
3. Freeze the water
4, Increase the pressure of water
Answer (Detailed Solution Below)
Option 2 : Cool the hot water coming from the condenser
Detailed Solution
Explanation:
The cooling tower cools the warm water discharged from the condenser and feed the cool water back
to the condenser. Thus reduces the cooling water demand in the power plant. Cooling water is used at
the places of a scarcity of water.
Types of the cooling tower.Wet Cooling Towers Dry Cooling Towers
+ In wet cooling towers, water
is sprayed on fills or
packing. Fill mixes falling * Dry cooling towers
water with ait. Air enters are employed where
through louvres. This mixing] cooling water is not
results in heat transfer, available in plenty,
which cools the water. even for the use of
+ The minimum temperature makeup.
to which water can be + Ina dry tower, warm
cooled is the adiabatic water from the
saturation or wet-bulb condenser flows
temperature of the ambient | __ through the finned
air. tubes over which the
+ The cooled water is cooling air is passed.
collected in the basin at the Heat is rejected to the
bottom, from where it is air as water is cooled.
pumped back to the
condenser.
uu
Rimportant Point
* For cooling of room and space Air conditioner is used
+ For the freezing of water, the refrigerator is used.
+ To increase the pressure of the water, a pump is used