Professional Documents
Culture Documents
2H305-983EN
(3) Remove screws that fix the C-arm rear cover, and put off the cover backward, direction of the
arrow in the drawing below. Screws are at both right and left sides.
(4) Remove screws that fix the C-arm front cover. Screws are at both right and left sides.
19
No. 2H305-983EN
(5) Remove screws that fix the cable guard at the C-arm front cover. Screws are at both right and
left sides. Put off the C-arm front cover forward a little, and remove the cable guard upward,
direction of the arrow in the drawing below.
(6) Put off the C-arm front cover forward, direction of the arrow in the drawing below.
(7) Remove screws that fix the C-arm top cover. Screws are at both right and left sides.
20
No. 2H305-983EN
(8) Loosen screws that fix the C-arm handle, and put off the handle upward.
(9) Attach covers after OP touch panel software update and Main board replacement.
(1) OP touch panel is at the backside of front cover. Set the dip switch of OP touch panel as
drawing below.
(2) Insert supplied parts of USB memory to the USB port on OP touch panel.
21
No. 2H305-983EN
(3) Turn on the C-arm unit after connect the power cable to the power supply.
22
No. 2H305-983EN
23
No. 2H305-983EN
Edit
Copy
Edit
Paste
24
No. 2H305-983EN
(11) Click Back button and go back to the display of (6), and click the icon in the photo below.
Back
25
No. 2H305-983EN
26
No. 2H305-983EN
Edit
Select All
(15) Click “Edit”, and select “Copy”. Click Back button and go back to the display of (6) after the
copy.
Edit
Back
Copy
27
No. 2H305-983EN
28
No. 2H305-983EN
(18) Files in “Run” folder are displayed. Click “Edit” and select “Paste”.
Edit
Paste
Yes
Yes to All
29
No. 2H305-983EN
(21) Turn off the C-arm unit after the file copy.
(23) Set the dip switch as factory default, with referring (1)
(25) Press mode button after the C-arm unit boot up.
30