Professional Documents
Culture Documents
Español Glove-Sleeve-Boot-Blanket Combo Tester Technical Data Sheet For GT5062-36
Español Glove-Sleeve-Boot-Blanket Combo Tester Technical Data Sheet For GT5062-36
Español Glove-Sleeve-Boot-Blanket Combo Tester Technical Data Sheet For GT5062-36
Specifications:
Input Power Requirement: 208 or 240 VAC at 50 or 60 HZ (other voltage options available)
Power Source for Test: 50 KVAC, 100 KVDC, or both systems
Volt Meter: 0-50 KVAC
Current Meter: For Gloves; 0-50 mA for each test position, For Blanket;0-100mA
Test Positions: 6 Gloves or 6 Sleeves (Straight Dip Method) or 3 Sleeves (Hammock Method)
6 Boots or 3 Helmets or 2 Line Hoses or 2 Hoods or
2 Blankets 36” or smaller
Test Method: For Gloves; HV test tank method,
For Sleeves; Hammock Method, or Straight Dip Test Method which requires
dielectric fluid in the bottom of the testing tank
For Blankets; HV bottom electrode with grounded top electrode
Standards: ASTM D120, D1048, D1051, F479, F496, F1116, F1117
• Diseños de laboratorio diseñados por CAD con todo el equipo necesario para una operación de laboratorio llave en mano
• Soporte técnico telefónico
• Soporte de servicio de campo completo
• Capacitación y certificación de operadores en el sitio
• Calibración, inspección y certificación de equipos en el sitio (como lo requieren ASTM, IEC y OSHA). Todos los sistemas se
verifican según sea necesario para garantizar su total conformidad.
HANCO INTERNATIONAL
A DIVISION OF THE HANNON COMPANY HANCO Model GT5062-36”
Combination Tester
Visit us www.hanco.com