You are on page 1of 2

Pace1PRMT

IP and PoE+ over Extended Distance


CAT5e or UTP Solution
Description
Altronix Pace1PRMT is a long range Ethernet adapter kit which transmits data at Pace1PTM
100mbps full duplex and power via a single twisted pair (UTP) or CAT5e or higher cable Pace1PRM
in a PoE(+) compliant format. Pace1PRM receiver is powered via a PoE midspan, such as
the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant
power over the cable to Pace1PTM transceiver which, in turn, passes this power to an
enabled IP camera/device. These plug and play units facilitate cost-effective solutions for
IP devices that need to be installed at distances greater than 100m. They also provide
a simple way to replace legacy analog products with new IP devices over single twisted
pair (UTP) or structured cable.

Key Features
- IEEE 802.3af (15W) and IEEE 802.3at (30W). - Extends Network link distance in an industrial environment.
- Throughput is rated to pass 100Mbps. - Retrofit digital IP cameras in an analog
CCTV CAT5e wired installations.
- Eliminates the costs and labor associated with installing
new network cabling. - UL Listed in the U.S. and Canada.
- Retrofit digital IP cameras in an analog CCTV installation. - CE Approved.
- Auto detection and protection of legacy - C-Tick Compliant.
non-PoE cameras/devices. - Lifetime Warranty / Made in the U.S.A.
- Works with Megapixel, HD720, HD1080 & VGA (SD) cameras.

Typical Operation Diagram


Pace1PRM Pace1PTM Mounting Hole

Pace1PRM - Receiver IP-UTP TRANSCEIVER

IP-UTP Receiver Transceiver


Passes PoE/PoE+ Passes PoE/PoE+
RJ45 LEDs Yellow - Activity RJ45 LEDs Yellow - Activity
Green - Speed Green - Speed
Green LED Power and PoE Green LED Power and PoE

Z1409 www.altronix.com Z1409 www.altronix.com PoE Camera


I.T.E. 43KC I.T.E. 43KC
Output Input Input Output
UTP RJ45 PoE PoE PoE UTP RJ45 PoE PoE PoE
Link Link LED Input LED Link Link LED Out LED

PoE+ over CAT5e up to 500m max.


or
Single UTP up to 153m max.
PoE compliant
100m max.
100m max.

Legend:
Powered Switch or NetWay MidSpan Structured Cable
or Single UTP

Rev. Pace1PRMT-09232016
Pace1PRMT
IP and PoE+ over Extended Distance
CAT5e or UTP Solution

Specifications
Input Agency Listings
Pace1PRM: Powered by midspan or endspan. UL/cUL UL60950-1
PoE compliant to IEEE 802.3af (15W) and (Information Technology Equipment).
PoE+ compliant to IEEE 802.3at (30W). CE European Conformity.
Pace1PTM: Powered by Pace1PRM. C-Tick compliant.

Ethernet Physical and Environmental


Connectivity: RJ45, auto-crossover. Dimensions (W x L x H)
Wire type: 4-pair Cat-5 or a single twisted pair UTP. Pace1PRM and Pace1PTM:
Distance: 3.5” x 3.5” x 1” (88.89mm x 88.89mm x 25.4mm).
CAT5e: up to 500m. Weight (approx.)
UTP: up to 152m. Product Weight 0.4 lbs. (0.18 kg).
Throughput is rated to pass 100mbps of data. Shipping Weight 1 lbs. (0.45 kg).
With proper headend equipment multiple Megapixel Temperature
cameras can be used. Operating:
Speed: 10/100BaseT, half/full duplex, auto negotiation. Pace1PRM: - 20ºC to 49ºC (-- 4ºF to 120.2ºF).
Pace1PTM: 15W: -- 40ºC to 75ºC (-- 40ºF to 167ºF)
25W: -- 40ºC to 70ºC (-- 40ºF to 158ºF)
Indicators (LED)
30W: -- 40ºC to 60ºC (-- 40ºF to 140ºF)
Green LED: PoE ON.
Storage: -40ºC to 75ºC (-40º to 167ºF).
Yellow and Green LED (by RJ45 jack):
Relative Humidity 85% +/-5%.
IP Link status, 10/100Base-T/active.
Operating Altitude: -304.8 to 2,000m.

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA


phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com

You might also like