Professional Documents
Culture Documents
com
Dear friends, are you ready to make an amazing elephant amigurumi? Today I will
share an amazing crochet elephant pattern. The free amigurumi pattern you see
in the picture is explained in all details. When you read the rest of the article, you
can learn how to do it in a very detailed way. This will make your job much easier.
As you know, elephant amigurumis are usually designed as dolls. That’s why they
look so cute. The amigurumi pattern that I shared today is quite impressive.
Especially the trunk of the elephant amigurumi looks really cute. Now if you’re
Designer: elenababytoys
MATERIALS:
● – plush yarn 1-2 skeins (Himalaya Dolphin baby, Kamtex Velor, Dolce YarnArt,
● – eyes 1 cm;
● – fabric for finishing paws and ears (can be replaced with AlizeSofty yarn);
● – scissors, needle.22
Abbreviations
inc : Increase
dec : Decrease
st: Stitch
dc : Double Crochet
ch : Chain
..in : make increase into same stitch as many as the number which is given in front
The head and body are knitted in one piece. We knit from the head.
1. 6 sc in MR
2. 6 inc = 12
3. (sc, inc)*6 = 18
4. (2sc, inc)*6 = 24
5. (3sc, inc)*6 = 30
6. (4sc, inc)*6 = 36
7. (5sc, inc)*6 = 42
8.-13. = 42 (6 rows)
Between the 12th and 13th rows we put markers for attaching the peephole.
We cut out circles from felt for albumens, i nsert eyes into them and fasten the eyes.
18. = 18 сс (if you do sc, then the neck will “dangle”, slst, as it were, strengthens
the neck and you knit the next row not in them, but in the previous one with the
capture of slst)
22. =24
*** Increases should be under the bottom of the future trunk. If a shift occurs, then
look ***
32. = 24
35. 6 dec = 6
Arms (2 parts)
1. 6 sc in MR
2. 6 inc = 12
3 – 6 = 12 (4 rows)
7. 3 dec, 6 sc = 9
8 – 9. = 9 (2 rows)
11 – 13 = 8 (3 rows)
Fasten the thread, cut it, leaving about 15 cm. Stuff the arms, tighten the hole.
LEGS (2 parts)
1. 6 sc in MR
2. 6 inc = 12
3. (sc, inc)*6 = 18
4. (2 sc, inc)*6 = 24
5. BLO 24 sc
6. = 24
8. 5 sc, 3 dec, 6 sc = 14
9 – 12 = 14 (4 rows)
14. = 12
Fasten the thread, cut it, leaving about 15 cm. Stuff the legs, tighten the hole.
Trunk
1. We make 14 sc through the hole on the head (10 sc from above and 4 from below
2. = 14 sc
3. = 13 sc
We make decrease from the underside of t he trunk, in all rows where there are
decrease.
4. = 12
5. = 11
6. = 11
7.-8. = 10
9.-10. = 9
11.-13. = 8
Stuff the trunk, cut the thread. Pull the hole over the back side.
EARS (2 parts)
Hook number 5.
1. 6 sc in MR
2. 6 inc = 12
3. (sc, inc)*6 = 18
4. (2sc, inc)*6 = 24
5. (3sc, inc)*6 = 30
First, we cut out the whites from the felt, attach them to the eyes.
Where there will be eyes we make tightenings (in the place of the eye at the 1st
stage of knitting, we put markers). (If the eyes are on a secure mount, we also make
tightening points at the points as shown in the photo.) After the tightening is done,
Cut out circles from the fabric for the ears and legs. We sew them on. You can knit
circles of yarn. The yarn should be thinner than the main yarn, for example
AlizeSofty.
We sew the ears between points 2 and 3 for the loops on the ears between points 1
and 2 (See photo. Point 1 center. From point 1 to point 2 approximately 4 rows,
We fasten the arms to the pins where we like, we look so that everything is even.
If you like everything, then we insert the needle from the inside of the handle, bring
it out into the button, insert it into the arm and then into the body. Further according
to the scheme. I do it several times. After we tight en the thread and bring it to the
between 5 and 6 rows from point 6 is the center). We will make a tail out of them.
TAIL
From the ends of the thread weave a pigtail, fix it and make a brush. We embroider
eyebrows.
That’s all.