Professional Documents
Culture Documents
Exp 5 6
Exp 5 6
Commands used –
1. Sketch
2. Revolve
3. Extrude Boss
4. Circular pattern
5. Rotate
PROCEDURE:
1. Select the front Plane-Sketch the profile as shown in figure to create shaft. Total
shaft length is 370mm.
3. The staging for the Compressor blades are 40mm and 140mm from the point of
origin.
5. Sketch the profile for the first and second compressor stage with new plane
height of 80mm, with a chord length of 20mm.
6. Loft the surface and twist the blade with 40degrees twisting.
1. The staging for the Turbine blades are at 300 mm from the point of origin.
3. Sketch the profile for Turbine with new plane height of 80mm, with a chord length
of 20mm.
4. Loft the surface and twist the blade with 40degrees twisting.
RESULT :
Aim – To Draft the different views of axial flow compressor and turbine
COMMANDS USED:
1. Model View
2. Detail View
3. Orientation
4. Annotation
PROCEDURE:
1. Select Drawing feature from the main menu before entering the SolidWorks
Workbench.
2. Select A4 Landscape-Browse for the file and Click on Orientation-Top View-Front
view-Isometric view.
3. After inserting all the views, Create Annotaions
4. Right click and select ‘edit sheet format. Enter the required details, with the name
Title of the experiment, name, roll number and Date.
5. Click on exit sketch workbench and save the file in Drawing (.dwg) format.
RESULT: Drafting of axial flow compressor and turbine are completed using
SolidWorks.