Professional Documents
Culture Documents
COMMANDS USED:
1. Extruded Boss/Base
2. Extruded Cut
3. Reference Geometry > Plane
4. Extrude Cut
5. Circular Pattern
PROCEDURE: -
1. Select front plane and sketch the profile for the bulkhead with the inner and outer
radius of 70mm and 80mm.
3. To create a new plane with an offset distance of 50mm, select front plane-
reference geometry-offset-50mm.
4. Select the new plane created and sketch the profile for frame with the inner and
outer radius of 70mm and 80mm, extrude to thickness of 3mm.
5. Using the mentioned procedure create in total 3 bulkheads and 6 frames each at
a distance of 50mm.
6. Create holes on all the frames using the Extrude Cut-Through all feature. Sketch
the holes of 3mm radius and extrude cut through all.
7. Sketch the profile for the Stringer- Z section, with a thickness of 1.25mm, extrude
through all. (Figure. 1)
COMMANDS USED:
1. Model View
2. Detail View
3. Orientation
4. Annotation
PROCEDURE:
1. Select Drawing feature from the main menu before entering the SolidWorks
Workbench.
2. Select A4 Landscape-Browse for the file and Click on Orientation-Top View-Front
view-Isometric view.
3. After inserting all the views, Create Annotaions
4. Right click and select ‘edit sheet format. Enter the required details, with the name
Title of the experiment, name, roll number and Date.
5. Click on exit sketch workbench and save the file in Drawing (.dwg) format.