Professional Documents
Culture Documents
Grundfos Document
Grundfos Document
Created by:
Phone:
Date: 26/01/2022
Qty. Description
1 CR 64-5-1 A-F-A-E-HQQE
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe
handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN
flanges.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means
of two coupling guards.
The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and vent
screw.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Date: 26/01/2022
Qty. Description
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing
offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is retained in the pump head by a cover and screws. It can be replaced without removing the motor.
The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring
offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades
ensure a high efficiency.
The base is made of cast iron. Both the inlet and the outlet side of the base have two pressure gauge tappings. The
pump is secured to the foundation by four bolts through the base plate. The flanges are fastened to the base by
means of locking rings.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. Electrical
tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The protection
reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset
cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local
regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center.
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: -30 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 1445 rpm
Actual calculated flow: 80 US GPM
Resulting head of the pump: 31.99 m
Pump orientation: Vertical
Date: 26/01/2022
Qty. Description
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals: CE,EAC,UKCA
Approvals for drinking water: WRAS,ACS
Curve tolerance: ISO9906:2012 3B
Materials:
Base: Cast iron
EN 1563 EN-GJS-500-7
ASTM A536 80-55-06
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC
Support bearing: Graflon
Installation:
t max amb: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -30 °C
Type of connection: DIN
Size of inlet connection: DN 100
Size of outlet connection: DN 100
Pressure rating for connection: PN 16
Flange size for motor: FT130
Electrical data:
Motor standard: IEC
Motor type: 112MC
IE Efficiency class: IE3
Rated power - P2: 4 kW
Power (P2) required by pump: 4 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D V
Rated current: 9.3 A
Starting current: 790-870 %
Cos phi - power factor: 0.75-0.68
Rated speed: 1460 rpm
Efficiency: IE3 88,6%
Motor efficiency at full load: 88.6 %
Motor efficiency at 3/4 load: 88.9 %
Motor efficiency at 1/2 load: 88.3 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 86U15813
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 121 kg
Gross weight: 154 kg
Shipping volume: 0.495 m³
Date: 26/01/2022
35
30
25 100
20 80
15 60
10 40
5 20
Eta pump = 67 %
Eta pump+motor = 59.5 %
0 0
0 20 40 60 80 100 120 140 160 180 Q [US GPM]
P NPSH
[kW] [m]
4.0 4.0
P1
3.5 3.5
3.0 P2 3.0
2.5 2.5
2.0 2.0
1.5 1.5
1.0 1.0
Date: 26/01/2022
H CR 64-5-1, 3*380 V, 50Hz eta
Description Value [m] [%]
Q = 80 US GPM
General information: H = 31.99 m
Product name: CR 64-5-1 n = 1477 rpm
A-F-A-E-HQQE Pumped liquid = Water
35 Liquid temperature during operation = 20 °C
Product No: On request Density = 998.2 kg/m³
EAN number: On request
30
Price:
Technical:
25 100
Pump speed on which pump data are 1445 rpm
based:
Actual calculated flow: 80 US GPM 20 80
140
45
100
190
4
x
14
891
4 X G 1/2
18
x
8
G 1/2
160
372
220
134
134
Impeller: EN 1.4301 220
Bearing: SIC
Support bearing: Graflon
Installation: 160
t max amb: 60 °C
G 1/2 G 1/2
Maximum operating pressure: 16 bar
891
TO AMPLIFIER
Electrical data:
THERMISTORS PTC ACCORDING TO DIN 44082
Date: 26/01/2022
Description Value
Rated voltage: 3 x 380-415D V
Rated current: 9.3 A
Starting current: 790-870 %
Cos phi - power factor: 0.75-0.68
Rated speed: 1460 rpm
Efficiency: IE3 88,6%
Motor efficiency at full load: 88.6 %
Motor efficiency at 3/4 load: 88.9 %
Motor efficiency at 1/2 load: 88.3 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: PTC
Motor No: 86U15813
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 121 kg
Gross weight: 154 kg
Shipping volume: 0.495 m³
Date: 26/01/2022
eta
0.6 I 12
0.4 8
0.2 4
P2 = 2.357 kW
cos phi = 0.59
Eta = 88.8 %
I = 6.83 A
0.0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 P2 [kW]
n P1
[rpm] P1 [kW]
1500
1400 4
1300 2
P1 = 2.653 kW
n = 1477 rpm
1200 0
Date: 26/01/2022
14
220
x
4
180
100
266
331
18
45
x
8
G 1/2
190
248
365
220
134
4 X G 1/2
G 1/2
160
140
372 891
Date: 26/01/2022
+T +T +T
+T +T +T
TO AMPLIFIER
RELAY
L1 L2 L3