Professional Documents
Culture Documents
Garlock Performance
Innovative sealing and valve technology is a
Garlock trademark. A number of national and
international patents, the first comprehensive
worldwide asbestos-free product range and
excellent solutions for flat gaskets, shaft and
stem seals are examples of Garlock’s advanced
sealing technology and high-quality valves.
2
Content
• Gasketing Products
GYLON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12
• Compression Packings
PS-SEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 29
• Hydraulic Elements
KSD-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 + 31
GARTHANE Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 + 31
DRYLOCK Packings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 + 31
3
Gasketing Products
Product range
100
IFG + HTC 9850 G-9900 TI ST- 706
BLUE GARD
0 10 20 30 40 50 60 70 80 90 100 110
Pressure: bar
GYLON
Re-structured PTFE gasketing for chemical applications.
4
BLUE GARD Organic Fiber Gasketing
Services:*1
Style 2950
Water, condensate, aliphatic hydrocarbons, oils,
gasoline and fuel oil
Style 3000
Water, aromatic hydrocarbons, oils, gasoline,
mild acids and alkalies
Style 3400, Style 3200
Water, saturated steam, inert gas, mild acids and alkalies
Style 3700
Water, saturated steam, mild acids, strong caustics of
moderate concentrations
General Information Style 2950 Style 3000 Style 3400 Style 3200 Style 3700
Colour green blue grey-black beige light grey
Binder NBR NBR SBR EPDM
Maximum Temperature*2 °C 350 370 370 370
Minimum Temperature °C -40 - 40 - 40 - 40
Continuous Operating Temperature °C 205 205 205 205
Maximum Pressure bar 69 70 83 83
3 1,0 and 1,5 mm 12000 12000 12000 12000
P x T max*
3,0 mm 8000 8600 8600 8600
Stress Relaxation (DIN 52913, 300°C) N/mm2 27 23 25 23
Compressibility (ASTM F 36) % 7-17 7-17 7-17 7-17
Recovery (ASTM F 36) % 50 50 50 40
Creep Relaxation (ASTM F 38) % 25 20,5 18,4 24,5
Tensile Strength (ASTM F 152) N/mm2 13 15 15 17
Sealability (ASTM F 37)
ASTM Fuel A ml/h 0,25 0,2 0,1 0,1
Nitrogen ml/h 1,0 0,6 0,4 0,7
Gas Permeability (DIN 3535) cm3/min 0,08 0,05 0,03 0,04
Density g/cm3 1,7 1,6 1,6 1,6
*1
Consult the chemical resistance chart or contact Garlock.
*2
For steam application see page 4.
*3
For P x T - factor see page 9.
5
IFG 5500, ST-706 Inorganic Fiber Gasketing
As inorganic fibers do not oxidize IFG and ST-706 provides greater thermal
and dimensional stability during process cycling.
IFG is produced to meet most service requirements. The IFG material also
offers flexibility when writing corporate piping specifications – giving you
the right gasket for the right application – the first time.
Services:*1
IFG 5500 ST-706
Water, saturated steam, aliphatic Hot water, saturated steam, super-
hydrocarbons, oils, gasoline, mild heated steam
acids and alkalies
6
IFG 5500, ST-706 Inorganic Fiber Gasketing
IFG expands the application range over aramid and glass fiber gaskets, pro-
vides the possibility to limit the number of different gasketing materials (reduc-
tion of excessive inventory costs) and offers the opportunity to extend your
maintenance intervals.
IFG not only gives you higher physical properties than aramid fibers as shown
in fig. 1, but also offers improved bolt load retention over time (fig. 2).
Furthermore IFG provides higher sealability, better torque retention and lower
creep relaxation. For your security and safety the recommended pressure is
much lower than the test result shown in fig. 3. Comparing the accelerated
oxidation test (fig. 4), IFG performs about 50 % better than the aramid-fiber
and is almost identical to the asbestos gasketing material properties. Fig. 1: IFG vs. Aramid Fiber
0 2 4 6 8 10 12 14 16
Thickness
Fig. 2: IFG vs. Aramid Fiber, DIN 52913 Fig. 3: IFG Blowout Resistance at 430 °C Fig. 4: Accelerated Oxidation Test
hot water
7
HTC 9850, G-9900 TI Carbon and Graphite Fiber Gasketing
Services*1
HTC 9850/G-9900 TI
Water, saturated steam, aliphatic hydrcarbons, oils,
gasoline, mild acids and alkalies, inert gases
8
Fiber Gasketing Information
Tests and certifications for Garlock Gasketing characteristics ref. DIN E 2505-Part 2
gasketing Pos. Profile Type Thickness Installation Operating Condition (°C)
Condition
Garlock gasketings have been tested
Remarks
hD mvu* mvo 20 100 200 300 400
by independant research institutions.
mm N/mm 2
N/mm 2
m mBO N/mm 2
bD/hD > 5.
Gasketing ST-706 3,0 35 165 1,3 165 90 60 50 45
BAM-Certification for IFG 5500
4 Flat 1 20 190 1,3 190 140 90 60 50
Gasketing IFG 3,0 23 165 1,3 165 90 60 50 45
Approval for Gas
* The values mvu are for gas and steam application. For non-corrosive media – with a surface tension similar to water – lower
DIN DVGW for IFG 5500
values can be used. The contact surface finish should be in between Rz = 50-160 μm.
Remarks
GARD 3000 Type k o x kD kl ko x kD kl
• BLUE GARD 3000 complies with N/mm mm N/mm mm
BS 6920 : 2000 BLUE GARD 3000 - 3700 15 x bD 1,3 x bD 25 x bD 1,3 x bD
contact area.
bD = gasket
HTC 9850 20 x bD 1,3 x bD 30 x bD 1,3 x bD
Fire Safe Testing G-9900 TI
ST-706 25 x bD 1,3 x bD 35 x bD 1,3 x bD
HTC 9850, G-9900 TI and ST-706
passed API 607 and Garlock IFG 15 x bD 1,3 x bD 25 x bD 1,3 x bD
Kerosene Fire Test.
Installation Correct Bolting Patterns
Availability
A few simple precautionary measures must be observed
BLUE GARD, HTC 9850, G-9900 TI,
in installation to ensure the most satisfactory joint.
ST-706 and IFG gasketing is avail-
• Centre the gasket on the flange. This is extremely vital
able in sheet-sizes (mm) of:
where raised faces are involved.
1500 x 1500, 1500 x 3000,
• Be sure surface finish and flatness are satisfactory. If
1500 x 4500, 1900 x 1900,
found otherwise, correct by remachining or shimming as
1900 x 3800, 3800 x 3800
on glass-faced flanges.
• Tighten bolts to compress gasket uniformly using the bolt-
and thickness (mm) of:
ing sequence shown.
0,4 - 0,8 - 1,0 - 1,5 -
• Use a torque wrench and well-lubricated fasteners to
1,6 - 2,0 - 3,0 - 3,2
ensure correct initial loading.
• All bolts should be tightened in one-third increments,
Garlock gasketing can be supplied
according to proper bolting sequence.
in sheets or to cut gaskets.
• Retorque 12 to 24 hours after coming on stream, when-
Customized gaskets or gaskets to
ever possible. The joint should stand as long as possible
any size and standard can be
before retorquing.
supplied.
• Never use anti-stick or lubricating compounds with the
gaskets. Premature failure could occur as a result.
P x T - Factor
Operating temperature and operating pressure Every combination of pressure and temperature
are parameters which should not be allowed to that results below the max. P x T is approved.
reach their maximum at the same time. The technical data stated above are deter-
The P x T-Factor (pressure x temperature - factor) mined in laboratories according to DIN- and
make it possible to consider the real operating ASTM- guidelines. There may be differences in
data for each potential application. practical operation because of the various
The multiplication of the max. temperature (°C) operating conditions.
and the max. pressure (bar) must not go beyond
the max. P x T.
9
GYLON Gasketing
GYLON Style 3504 Blue GYLON Standard, Blue and Off-White now TÜV
Certified: Quality Tested in high quality in accordance
Style 3504 GYLON gasketing is very compressible due to its inorganic
with German Clean Air Regulations (“TA-Luft”)
microspheres, thus sealing more effectively under lower bolt loads. This excel-
lent gasketing material is ideal for use with glass-lined equipment and wher- A comprehensive test programme was run by the TÜV
ever lower bolt loads to effect an efficient seal are necessary. Can replace Süddeutschland covering the following aspects:
PTFE envelope gaskets in many instances. Conforms to FDA specifications. • Low leak rate of the seal under maximum operating
conditions. Proof of a leak rate
GYLON Off-White Style 3510 ) 1,0 x 10-4 mbar x ltr / (s x m) acc. to TA-Luft 2002.
• Checks on how assembly and maintenance is con-
Style 3510 GYLON has a very wide chemical resistance (the optimum of all
trolled so as to ensure proper operation.
the GYLON gasketing products). It is particularly suited for service against
• Confirming leaktightness of the materials also in
hydrofluoric acid and other strong chemicals such as potassium and sodium
endurance tests.
hydroxide, hydrogen fluoride, aluminium fluoride and chrome plating solutions.
• Proof of adequately high mechanical properties for
Conforms to FDA specifications.
corresponding temperatures.
• Test on safety against bursting and blow-out (2.5 x PN).
GYLON Style 3545
• Proof of a controlled and consistently high quality
GYLON Style 3545 consists of a highly compressible outer layer of microcel- production output at the manufacturer´s site.
lular PTFE and rigid PTFE core which reduced the cold flow and creep.
Where by both components have been sintered together homogeneously. The analysis by the TÜV Süddeutschland on the GYLON
These materials are made of pure PTFE without fillers. Style 3545 provides a material for flat gaskets has yielded the results sum-
very soft surface, particularly suited for flanges with uneven surfaces and marised in the table below and it has been determined
where bolts can not be tightened strongly. that GYLON is, for the stated operating parameters and
when used in connection with flat flanges according to
GYLON Style HP 3560 DIN 2635 Form C, of high quality in accordance with the
testing programme of the Institute for Plastics in the sense
Special GYLON gasketing with a perforated stainless steel insert for agressive
of “TA-Luft” (Clean Air Regulations).
chemicals and hostile environments where safety and blow-out resistance is
essential.
Operating Operating
Gasket type jVU temperature pressure
(N/mm2) (°C) (bar)
10
GYLON Gasketing Information
Availability
GYLON gasketing is available in sheet-sizes (mm) of: After
1500 x 1500, 1500 x 2280, 1780 x 1780
40
30
20
10
Test showing the effect of overpressurisation of GYLON Standard: 55 x 75 x 2 mm; initial com-
GYLON Standard 90 / 50 / 2; Test between pressive stress of 50 N/mm2.
compression plates.
11
GYLON Technical Information
GYLON Standard GYLON Standard GYLON Blue GYLON Off-White GYLON GYLON
Style 3501 E** Style 3500 Style 3504** Style 3510** Style 3545 Style HP 3560
Temperature range -210 to +260 °C -210 to +260 °C -210 to +260 °C -210 to +260 °C -210 to +260 °C -210 to +260 °C
Gas sealability (DIN 3535/6) 0,10 cm3/min 0,25 cm3/min 0,25 cm3/min 0,10 cm3/min 0,04 cm3/min 0,02 cm3/min
Leak rate (DIN 28090-2), h2,0 < 0,001 mg/(s x m) < 0,001 mg/(s x m) < 0,001 mg/(s x m) < 0,001 mg/(s x m) < 0,002 mg/(s x m) –
Density (DIN 28090-2) 2,19 g/cm3 2,10 g/cm3 1,70 g/cm3 2,80 g/cm3 – –
Gasketing characteristic values according to DIN 28090 for the quality assurance and calculation of flanged connections
GYLON Standard GYLON Off-White GYLON Blue GYLON
Style 3500 Style 3510 Style 3504 Style 3545
Style 3501 E
Maximum initial
DIN 28090-1 N/mm2 160 150 150 140
compressive stress jV0
Maximum in-service
N/mm2 100 70 70 70
compressive stress jB0/200°C
Minimum
DIN 28090-1 N/mm2 20 19 10 17
initial stress jVU/L0,1-40bar
Compression modulus at room temperature KSW DIN 28090-2 % 3,1 4,1 20 –
Percentage creep relaxation at room temperature KRW DIN 28090-2 % 1,1 1,3 6,1 –
Percentage creep relaxation at elevated temperature WRW DIN 28090-2 % 2,5 4,2 5,7 –
GYLON Standard
Style 3500 1,0-3,2 18 160 160 120 100 20 18 x bD 1,3 x bD
Style 3501 E 20-250 10 x bD 1,3 x bD
bD/hD * 10
The values jVU are for gas and steam application. kO x KD-values for fluid can be used 20 % lower.
For fluids lower values can be used (~ 20 %). bD = effective gasket width.
12
Semi-Metallic Gasketing
GRAPH-LOCK® Gasketing
Graphite Gasketing Style 3125 TC-E (reinforced with
tanged stainless steel core) and Style 3125 SS-E
(reinforced with stainless steel foil) are available in
1500 mm x 1500 mm sheets too.
GRAPHONIC® Gasket
Flexible graphite sealing element with corrugated metal
core for heat exchanger applications.
Kammprofile Gaskets
Style 642 as heat exchanger or conventional design.
Material: Stainless Steel with sealing elements
of Graphite or PTFE.
13
HELICOFLEX® / CEFIL’ AIR®
After tightening
14
Compression Packings
15
A selection of popular Garlock packings
PACKMASTER 1 51-GO Style 5889 Style 1925 Style 5200 SYNTHEPAK 8921-K
PACKMASTER 1 The combination of resilient non- Pumps and valves in mild acids and PH 4 - 10
asbestos fibers and PTFE offers eco- alkalies, air and dry industrial gases, P (bar) 20 20
nomical alternatives to commercial petroleum and synthetic oils, aromatic T (°C) - 110 to +260
grade asbestos pump and valve and aliphatic solvents, cooling water, v (m/s) 8 2 –
packings. sea water and steam.
16
A selection of popular Garlock packings
SYNTHEPAK 8922 Style 98 Style 1300 E Style 127 AFP Style 2091 Style 1303 DRY E
98 This carbon fiber packing offers pre- Pumps, valves and mixers in strong PH 0 - 14 *1
mium performance and economy in acids and alkalies, boiler feed pumps. P (bar) 35 35 175
most high speed chemical applica- T (°C) -200 to + 455 *2
tions. Style 98 is also an excellent v (m/s) 20 2 –
valve stem packing.
1300 E A graphite packing made from high Boiler feed pumps, acid pumps and PH 0 - 14*1
purity expanded flexible graphite for valves, agitators and mixers. P (bar) 35 – 200
maximum sealability and integrity. It T (°C) -200 to +455*2
can be used with confidence in both v (m/s) 20 – –
pumps and valves. In a wide range
of service conditions.
127 AFP 127 AFP is an excellent valve stem Steam in power generation and
packing for use in high temperature chemical processing. PH 1 - 12
and high pressure service. Outer P (bar) 82
jacket of carbon yarn with inconel T (°C) +455*2
„wire re-inforcement around a
resilient core“. * Resilient core from size 1/4 inch square
2091 Valve Stem Packing Style 2091 is a Steam with high temperature/pressure
braided construction of pure combinations. PH 0 - 14
expanded flexible graphite yarn P (bar) 150
around a reinforced stainless steel
T (°C) -240 to +1000; 650 in steam
wire. It combines the easy installation
features of an braided packing with
the proven superior sealing proper-
ties of expanded pure graphite rings.
1303 DRY E The packing Style 1303 DRY E reflects Power generation, Steam applications
the latest generation of graphite Hydrocarbon processes. PH 0 - 14
valve stem packing. Graphite flakes, P (bar) 200
encapsulated in a very thin metal T (°C) -240 to +1000 ; 650 in steam
mesh construction provide an innov-
ative strand design and minimize
valve stem scoring. 1303 DRY E is
ideally suited for use as endrings too.
*1
Except strong oxidizers.
*2
650 °C in steam.
17
Pump Packing
When compressing the DSA set the cup and cone rings expand radially to
form a positive seal against both the shaft and the housing. Based on the
sophisticated geometry DSA requires less axial load than other common
packing solutions. DSA offers reduced costs in maintenance service. The flexi-
ble graphite rings are very efficient in conducting heat away from the shaft,
therefore equipment runs cooler. Various combinations against almost every
media can be realized by using different packing styles.
Our 8093 DSA set is the technically preferred solution, however, when spool
stock is required style 1304 would be the best alternative.
Standard 8093 DSA arrangement
18
Valve Packing
PH 0 - 14*1
19
Compression Packing Availability
Square Style
SYNTHEPAK
mm inch PM 1 51-GO 5889 1925 5200 8921 K 8922 98 1300 E 127 AFP 2091 1303 DRY 1304 1303 FEP
3 1/8 19 18 23 14 39 – 13 13 – 19 11 – 14 16
5 3/16 40 40 53 31 50 – 29 26 29 38 38 29 23 39
6 1/4 71 70 89 63 74 62 60 51 45 59 50 45 51 62
8 5/16 108 100 124 93 114 95 85 77 80 117 79 80 91 90
10 3/8 142 153 163 124 156 125 124 97 111 156 86 111 119 133
11 7/16 186 191 222 163 198 186 150 116 134 209 119 134 167 167
12 1/2 222 270 286 206 240 219 206 162 182 240 194 182 201 225
14 9/16 291 316 362 276 297 280 261 212 244 330 269 244 236 265
16 5/8 354 425 437 346 362 316 316 248 318 391 314 318 297 346
18 11/16 425 495 512 425 437 381 381 319 403 495 419 403 346 464
19 3/4 512 594 572 495 512 464 450 354 449 550 444 449 425 572
22 7/8 676 826 782 646 708 676 708 479 602 708 698 602 550 782
25 1 874 1062 1062 826 929 874 929 572 802 929 803 802 743 991
Weight table (in gram per meter). Minimum order quantity: 2,5 kg.
45° D
45°
d
s
L
s
s
max: 0,03 x S
s
d h9
DH11
20
KLOZURE Oil Seals and PS-SEAL
Garlock PS-SEAL
Garlock GYLON PS lip material has shown outstanding
results in radial shaft sealing since 1960.
21
KLOZURE Oil Seals
KLOZURE Model 64
Severe service seal for heavy
machinery such as steel rolling mills,
paper manufacturing machines, coal
grinders and gear drives. KLOZURE
Model 64 operates with extremely
high shaft speeds and accomodates
greater shaft misalignment and run-
out.
KLOZURE Model 59
Large bore seal for moderate to
severe operating conditions. The
stainless steel finger spring makes
KLOZURE Model 59 especially
suitable in contaminated/dusty
environments.
Model Case Spring Shaft Shaft Speed Misalignment Available Lip Installation
Diameters and Run-Out Material
Bonded stainless
59 Steel 150 - 2300 mm 25 m/s 2 mm press-fit
steel finger spring
22
KLOZURE Oil Seal Information Model 64, 53, 63, 59
25°
21 - 40 3,0
R 0,5
41 - 70 4,0 L
Housing bore -Ø
23
KLOZURE Oil Seals
KLOZURE Model 23
Split seal with bonded stainless steel
finger springs saves downtime cost
due to easy installation (no disman-
tling of equipment). KLOZURE
Model 23 can be cut to size offering
an unmatched size availability. Used
in maintenance applications in steel
mills, mining, pulp and paper plants,
marine etc. The seal is available in
both metric and inch sizes.
KLOZURE Model 26 E
Designed for applications where cor-
rosion is a problem for metal cased
seals. KLOZURE Model 26 E is widely
used as work roll sealing at steel
rolling mills. The molded in stainless
steel finger spring eliminates the
problem of loose springs and
trapped contamination as in garter
springs. Available in both metric and
inch sizes.
Model Spring Shaft Diameters Shaft Speed Misalignment Available Lip Installation
and Run-out Material
MILL-RIGHT N,
Bonded stainless steel 75 - 1500 mm 5 m/s 0,25 mm Cover plate, rec-
23 MILL-RIGHT ES,
finger spring and larger 10 m/s 0,13 mm ommended
Silicone, MILL-RIGHT V
5 m/s 0,40 mm
Bonded stainless steel Cover plate, rec-
26 E 20 - 1500 mm 10 m/s 0,25 mm
finger spring NBR, ommended
25 m/s 0,20 mm
MILL-RIGHT E,
5 m/s 0,80 mm Silicone,
Stainless steel Cover plate, rec-
154 up to 2400 mm 10 m/s 0,40 mm Fluoroelastomer
garter spring ommended
25 m/s 0,10 mm
24
KLOZURE Oil Seal Information Model 23, 26, 154
MILL-RIGHT E
Split KLOZURE Model 23 Nitrile based material with outstand-
installation instructions ing abrasion resistance and
h
increased tem-perature resistance.
c • Clean the recess
20 °
Operating temperature:
Housing bore-Ø H8
• Oil the shaft
• Join both ends on top of the hous- - 40 °C to + 175 °C *1
ing and insert the join ends first. Then
Shaft-Ø h11
Axial Width
Clearance
b (mm)
h (mm)
mm
42 60 10 115 140 12
R
Ra ) 2,0
42 62 8 120 150 12
GYLON lip
45 62 10 125 150 12
d1 h11
45 65 10 130 160 12
d2 H8
48 62 8 135 170 12
48 65 10 140 165 10
Stock sizes are indicated with bold type face. Other sizes and materials
are available on request.
PS-SEAL Lip
The PS-SEAL lip set includes a GYLON lip element plus a Viton static sealing S1
element. PS-SEAL lips are available in any size in accordance with the PS-
SEAL lip engineering data listing. PS-SEAL lips are widely used when a size Shaft W D H H1 S 5 10 25
does not fit our PS-SEAL standard size range and where pressures above Diameter bar bar bar
10 bar are encountered. up to 19 6 0,8 2,5 2,0 2,0 2,0 0,5 0,2
20 - 49 7,5 0,8 3,5 2,5 2,5 2,5 0,5 0,2
D
0,7 - 0,05 50 - 149 10 1,0 4,5 3,5 3,0 3,0 0,5 0,2
1
150 - 299 12,5 1,0 6,0 4,5 3,0 3,0 0,5 0,2
300 - 450 15 1,0 8,0 6,0 3,0 3,0 0,5 0,2
H
H1
S
ISO Press-fit H7/r6
Ordering example for shaft-Ø 100 mm: Garlock PS-SEAL lip 100 x 120 x 1,
S1
Static seal
H
Typical applications
Housing Bore - Ø H7
H1
S1
• Centrifuges
Shaft - Ø h11
• Separators
S1
• Rotating air compressors
• Mixer
• Agitators
• Rotary transmissions
• Rotating pumps Ordering example for
S1
Shaft shaft-Ø 100 mm and
PS-SEAL Special advantages Diameter H H1 B 5 bar 10 bar 25 bar max. 10 bar: Garlock
PS-SEAL Special,
• Maximum sealing surface speed to 45 m/ sec. up to 19 8 10 8 2,2 0,5 0,2 100 x 128 x 10; 10 bar
• Excellent chemical resistance 20 - 64 11 12,5 10 2,5 0,5 0,2 Ordering example
65 - 119 14 15 10 3,0 0,5 0,2 with O-ring: Garlock
• Low friction loss and wear resistant
120 - 199 15 17 12 3,0 0,5 0,2 PS-SEAL Special,
• Applicable in pressure and vacuum 100 x 130 x 10; 10 bar
200 - 299 17,5 20 15 3,0 0,5 0,2
• Temperature to 250 °C* with O-ring
300 - 450 20 25 20 3,0 0,5 0,2
• Good dry running capability*
• Complies with requirements of the Directive 94/9/EC (ATEX)
* depending on shaft speed
S1
Shaft - Ø h11
PS-SEAL Special,
double lip, 10 and 25 bar
S1
pressure/vacuum; design
100 x 130 x 17; 10 bar
with O-ring
Typical applications
• Dryers
• Mixer
• Agitators
Media
28
PS-SEAL Technical Information
• Rmax = 4 μm 0,05
9 R min. 1 mm
Standard Stainless steel and polished
8
1.4571 (AISI 316 TI)
7
Pressure p (bar)
5 Fig. 2
Special Stainless steel
4
1.4571 (AISI 316 TI) GYLON-B
3
10°
2
GYLON-W
1
plus 0,4 mm
minus 5 mm
Shaft - Ø
0
0 5 10 15 20 25 30 35 40 45
Fluoroelastomer Standard material Shaft speed v (m/s)
FKM
Application limitation
GYLON Special material
for applications The limitations for temperature, pres-
where improved sure and shaft speed, which are
chemical resistance given in this catalogue cannot occur
or FDA approval simultaneously. For maximum operat-
is required. ing conditions of GYLON B and
GYLON W consult the diagram.
29
Hydraulic and Pneumatic Seals
30
Hydraulic and Pneumatic Seals
31
Product Range
Hydraulic Components
Oil Seals
Compression Packings
Gasketing Products
Metallic Gasketing
Mechanical Seals
Valves
Garlock GmbH Garlock France S.A.S Garlock (GB) Limited Garlock Middle East
Falkenweg 1 90, Rue de la Roche du Geai Unit H5, Premier Way P.O. Box 1518
41468 Neuss 42029 Saint-Etienne Lowfield Business Park Oilfield Supply Centre
Germany France Elland, Jebel Ali Free Zone
Phone: +49-2131/349-0 Phone: +33-4/77435100 West Yorkshire, HX5 9HF Dubai U.A.E
Fax: +49-2131/349-222 Fax: +33-4/77435151 United Kingdom Phone: +971-4/8833652
E-mail: garlockgmbh@garlock.com E-mail: garlockfrance@garlock.com Phone: +44-1422/313600 Fax: +971-4/8833682
http://www.garlock.eu.com http://www.garlock.eu.com Fax: +44-1422/313601 E-mail: garlock@emirates.net.ae
E-mail: enquiries@garlockgb.co.uk http://www.garlock.eu.com
http://www.garlock.eu.com
Other Garlock facilities: Garlock Inc., N.Y., U.S.A. • Garlock of Canada Ltd. • Garlock de Mexico • Garlock Pty. Ltd., Australia • Pacific Rim Operations, Singapore