Professional Documents
Culture Documents
MB2505WTHRU MB2510W SINGLE-PHASE BRIDGE RECTIFIER Datasheet
MB2505WTHRU MB2510W SINGLE-PHASE BRIDGE RECTIFIER Datasheet
FEATURES MB-35W
l Low cost 1.14( 28.9)
1.12( 28.4)
0.570( 14.5)
0.205( 5.2) 0.530( 13.5)
0.197( 5.0)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Plated 0.25” (6.35mm) lug. 0.46( 11.7)
EXOPY CASE
l Polarity: Polarity symbols marked on case 0.41( 10.5)
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max. 0.70( 17.8) MIN
l Weight:0.93 ounce, 26.4 grams
0.042( 1.10) DIA
0.038( 0.97) TYP
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum Average Forward
I(AV) 25 Amps
Rectified Output Current, at TC=55℃(Note1,2)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC IFSM 300 Amps
Method)
Rating for Fusing(t<8.3ms) I2 T 373 A2S
Maximum Instantaneous Forward Voltage at 5.0A VF 1.1 Volts
Maximum DC Reverse Current at TA=25℃ 10 µAmps
IR
rated DC blocking voltage TA=100℃ 1.0 mAmps
Isolation Voltage from case to lugs VISO 2500 VAC
Typical Thermal Resistance (Note 1,2) RθJC 2.0 ℃/W
Operating Temperature Range TJ -55 to +150 ℃
Storage Temperature Range TSTG -55 to +150 ℃
NOTES:
1. Unit mounted on 5”×6”×4.9”(12.8×15.2×12.4mm) Al. finned plate.
2. Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
3. Suffix “W” designates Wire Lead