Professional Documents
Culture Documents
Communication System
Communication System
Operating instructions
BMW Motorrad communication system
Vehicle data/dealership details
General instructions
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Note on health compatibility . . . . . . . . . 8
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical data . . . . . . . . . . . . . . . . . . . . . . . 8
z
Overview DANGER High-risk haz- Indicates the end of a
1 This section provides an over-
ard. Non-avoidance leads passage relating to spe-
to fatal or severe injury. cific accessories or items
6 view of these operating instruc-
ATTENTION Special of equipment.
tions as well as some general
notes on the BMW Motorrad notes and precautionary
Tightening torque.
communication system. Before measures. Non-compliance can
you can use your communica- lead to damage to the vehicle or
accessory and, consequently, to
General instructions
General instructions
the wind-protected boom mi- Although Bluetooth is designed
Different installation kits are avail- crophone is automatically sup- to establish and sustain robust
able for the various helmets. pressed, making communica- connections over short distances,
tion from within closed helmets as with every other wireless
NOTICE possible, even at high speeds. technology disruptions are
However, in open-faced helmets, possible. Interference can affect
The descriptions and images in
communication at high speeds is connections or connections can
these operating instructions re-
only possible to a limited extent. sometimes fail. Particularly when
late to the BMW System 7 Car-
The microphone should always multiple devices operate in a
bon helmet. The functions de-
be positioned as close to the Bluetooth network, with wireless z
scribed also apply similarly to the
mouth as possible. technology of this nature it is
other BMW helmets.
not possible to ensure fault-
The system is non-motorcycle- Bluetooth free communications in every
specific and designed to be used situation.
Bluetooth is a short-range
by rider and passenger on the
wireless technology. Bluetooth
same motorcycle. Although it is
devices are short-range devices
possible for the riders of two mo-
transmitting on the licence-
torcycles to communicate with
free ISM waveband (Industrial,
this system, the likelihood of vari-
Note on health a collection point for electronic e.V. (DIN). Versions for individual
1 compatibility devices for disposal. countries may differ.
8 As the evidence stands, there is
no indication that using Bluetooth Currency
devices has a negative effect on The high safety and quality levels
humans. The transmitting power of BMW accessories are ensured
of the BMW Motorrad commu- by a process of continuing evol-
General instructions
Operation
Switch on communication igation device and helmet . . . . . . . . . . . 20
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connections to several devices . . . . . 20
Switch off communication
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Software updates . . . . . . . . . . . . . . . . . . . 21 z
Adjust the volume . . . . . . . . . . . . . . . . . . 13
Control of music playback . . . . . . . . . . 14
Starting voice control on the mobile
phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connection from helmet to hel-
met . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connection from telephone to hel-
met . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operating panel
2 1 Starting voice control on
10 the mobile phone (only
with communication sys-
tem for System 7 Carbon
helmet) ( 14)
2 Switch communication
Operation
4
LED flashes four times per
second
Operation
The communication system is
searching for Bluetooth devices
5
The status reports of the green LED flashes twice and then z
LEDs 6 have the following mean- goes out for one second
ings: The communication system is
1 in music mode without music
LED flashes once per second reception
The communication system is 6
in standby mode
LED goes out briefly twice
2 and is then illuminated for one
second (inverse behaviour to 5)
LED is constantly illuminated
The communication system
There is an active Bluetooth
is in music mode with music
connection to a second com-
reception
munication system or to a tele-
phone or navigation device
Close the flip-front the bracket. If required, seek
2 helmet the advice of a specialist work-
shop, preferably an authorised
12 Before closing a flip-front hel- BMW Motorrad dealer.
met, position the microphone
in front of your mouth to pre- Switch on
vent it getting trapped during
communication system
closing. Then close the chin
Operation
section.
Operation
switched on, a system error has Adjust the volume
occurred:
Seek the advice of a specialist CAUTION
workshop, preferably an author-
ised BMW Motorrad dealer. Press and hold button 2 until
Communication system z
which is set too loud
Press and hold button 2 for ten a message indicates the bat-
tery charge and the red LED 4 Risk of accident due to not hear-
seconds to restart the commu- ing other road users (particularly
nication system. starts flashing.
special vehicles), hearing damage
NOTICE Select the volume of the
communication system so
If the communication system fails that traffic perception is not
for 15 minutes to find any of the impaired.
Bluetooth devices with which it is
paired, it switches off automatic-
ally to save the batteries.
Control of music bon helmet and can only be used
2 playback with compatible mobile phones.
14
Operation
Press button 1.
The volume is decreased with
z each keystroke.
Press button 2. Press button 1 to start the
Press button 3.
Music playback is started or voice control service on the
The volume is increased with
paused. paired mobile phone.
each keystroke.
Press and hold button 1 or 3.
NOTICE
The previous or next music
track is played. The voice control commands for
the mobile phone may be found
Starting voice control in the documentation for the spe-
on the mobile phone cific operating system.
Requirement The voice control service on
This function is currently only your mobile phone prompts
available with the System 7 Car- you for voice control.
Press button 1 to cancel voice devices must be made known to green LEDs light up continu-
control. each other (pairing). ously. 2
The communication between If no communication is possible:
Connection from 15
helmets is interrupted during Make sure that neither of the
helmet to helmet phone calls or navigation an- helmets is in music mode.
nouncements, this being indic- Increase volume if required.
Connection setup Check microphone alignment
ated by a sound signal in the
other helmet. Communication ( 12).
Operation
between the two helmets is re-
stored, or music playback re-
sumed, as applicable, as soon as
the phone call or announcement z
is over. The re-establishment of
the connection is indicated by a
new sound signal.
Exception: communication
The connection setup between between helmets is still possible
two helmets is automatic as soon during navigation announcements
as both communication systems of BMW Motorrad navigation Briefly press button 2 twice
are switched on. devices. (change to music mode) to in-
terrupt the connection between
NOTICE Operation the helmets.
Before the initial connection Switch on the communication Briefly press button 2 twice
setup, the participating Bluetooth systems of both helmets. again to re-establish the con-
As soon as there is a connec- nection between the helmets.
tion between the helmets, the
Connection from in question for details. Note that ing the operating facility on the
2 telephone to helmet the Bluetooth function must be helmet.
active; the communication sys- Communication between the two
16 Connection setup tem might have to be authorised helmets is restored, or music
or authenticated. playback resumed, as applicable,
as soon as the phone call is over.
NOTICE
Operation
Operation
Operation
authorised or authenticated.
Briefly press button 2 to re- NOTICE
ject an incoming call during the
sound signal. Before the initial connection z
Press button 2 briefly to hold setup, the participating Bluetooth
the current call. devices must be made known to
Briefly press button 2 again to each other (pairing).
resume the held call.
Press button 2 for a longer Music playback is interrupted
period (approx. two seconds) Each helmet with a communica- for navigation announcements.
to end the current call. tion system can be paired with a When using BMW Motorrad nav-
navigation device of its own, but igation devices, communication is
NOTICE a navigation device can be paired still possible from helmet to hel-
with only one helmet. met, whereas this is interrupted
For technical reasons, a brief with other navigation devices. An
period might elapse after the but- The configuration settings and
range of functions supported by acoustic alert sounds in the pas-
ton is pressed before the tele- senger's helmet to indicate that
the navigation device determ-
ine whether or not connection communication has been inter-
rupted. Communication between Connection from music
2 the two helmets is restored, or playback device to
NOTICE
music playback resumed, as A2DP (Advanced Audio Distribu-
18 applicable, as soon as the an- helmet
tion Profile) is a non-proprietary
nouncement is over. Connection technology that enables stereo
Operation audio signals to be transmitted
by Bluetooth to a compatible
Switch on the navigation device receiver.
Operation
Operation
does not detect a second hel- settings on the music device.
met, music mode is always act-
ive. If a second communication Operation
system is stored, music mode Switch on the music device
must be activated manually. and the communication sys- z
Music playback is interrupted for tem. If the connection to the music
the duration of a phone call or a Check that the connection device is lost:
navigation announcement. has been made on the music Press button 2 twice briefly.
device. The communication system at-
Sound quality If there is no connection: tempts to re-establish the con-
BMW Motorrad recommends the Check settings of the music nection to the music device.
following settings in the system device. Press button 2 twice briefly
settings of the music device to
to switch between music and
achieve the best possible sound NOTICE
communication mode.
quality:
Some Bluetooth devices do not
support automatic connection
set-up.
Connection between the telephone must be connec- Another communication system
2 telephone, navigation ted with the navigation device. An A2DP (Advanced Audio
The navigation device then an- Distribution Profile) compat-
20 device and helmet nounces, accepts and ends any ible music playback device
Connection phone calls. An HFP/HSP (Hands Free Pro-
file/Handset Profile) telephone
Connections to several or navigation device
devices
Operation
Operation
The second communication
system must be switched
to music mode manually.
Depending on the music
device, the changeover can
z
occur automatically.
If music is being played in both
helmets: Software updates
Briefly press button 2 on one The latest software version
of the helmets twice to switch is made available on the
from music mode to commu- BMW Motorrad homepage.
nication mode. Connect the communication sys-
Both helmets switch to com- tem to the computer using a
munication mode. micro USB cable to carry out a
software update.
z
22
2
Operation
Pairing
Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3
23
Pairing two helmets . . . . . . . . . . . . . . . . . 24
Pairing of telephone and helmet . . . . 26
Pairing of navigation device and hel-
Pairing
met . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Pairing of music device and hel-
met . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 z
Deleting pairing entries . . . . . . . . . . . . . 30
Pairing phone must be integrated in the
3 Two Bluetooth devices must de-
connection via the navigation NOTICE
device ( 20). Despite the standardisation of
24 tect each other before they can
create a connection with each Bluetooth and the interoperability
A Bluetooth device which has
other. This process of mutual this has created between many
already been detected is re-
detection is called "pairing". A devices, there can be no guar-
placed with a second device of
device is stored once it has been antee that all available Bluetooth
the same category due to pairing.
devices will function correctly.
Pairing
Pairing
Simultaneously press and hold
Switch on the communication button 2 and button 3 of the The green LED of the searching
systems of both helmets. second helmet until the flash- helmet 2 flashes twice as fast z
ing speed of the green LED 6 as the green LED of the visible
has increased twice. helmet 1.
The communication system
of the second helmet now If pairing is successful the
searches for another visible green LEDs of both helmets
helmet for a maximum of 60 light up for one second and the
seconds; green LED 6 flashes voice connection is established.
at a rate of four flashes per A high-pitched confirmation
second. tone sounds in both helmets.
If pairing fails the red LED of
Simultaneously press button 2 the searching helmet flashes
and button 3 of one helmet three times and a low-pitched
until the flashing speed of the warning tone sounds. The
green LED then switches to
a slow flash, indicating that the Pairing of telephone
3 system is on standby. and helmet
If pairing is unsuccessful:
26
Switch off all other Bluetooth
devices in the immediate vi-
cinity and try to pair the two
helmets again.
Pairing
NOTICE
It can take some time for a Press and hold button 2 and
z Bluetooth device to be detected. button 3 of the communic-
It is always best to activate the ation system simultaneously
search function as soon as If necessary, consult the oper- until the flash frequency of the
possible after activating visibility, ating instructions of your tele- green LED 6 has increased
so that the searching device will phone concerning its Bluetooth once (2 Hz flashing).
have as long as possible to find functions. The communication system is
the visible device. Switch on communication sys- now visible to other Bluetooth
tem and telephone. devices for a maximum of
If pairing is again unsuccessful: 60 seconds, the green LED
Deleting pairing entries ( 30). flashes twice per second.
Run the pairing procedure Start the search function of the
again. telephone for other Bluetooth
devices.
Pairing of navigation
NOTICE
device and helmet 3
It can take some time for a 27
Bluetooth device to be detected.
It is always best to activate the
search function as soon as
possible after activating visibility,
so that the searching device will
Pairing
have as long as possible to find
the visible device. The green LED 6 is illuminated
If the communication system for a short time and a high- z
has been detected by the pitched confirmation tone
sounds. If necessary, consult the oper-
telephone, it is displayed as a
ating instructions of your nav-
headset with the designation
igation device concerning its
"BMW_HELMET_III xxxx". The
Bluetooth functions.
letters "xxxx" represent the
Switch on communication sys-
identification number of the
tem and navigation device.
communication system.
If requested, the security code
'0000' must be entered during
the pairing phase.
3 NOTICE
Pairing
have as long as possible to find
Press and hold button 2 and the visible device.
button 3 of the communication If the communication system
z
system simultaneously until the has been detected by the mu-
If necessary, consult the oper- flash frequency of the green sic device, it is displayed as
ating instructions of your music LEDs 6 has increased once a headset with the designa-
device concerning its Bluetooth (2 Hz flashing). tion "BMW_HELMET_III xxxx".
functions and A2DP capability. The communication system is The letters "xxxx" represent
Switch on communication sys- now visible to other Bluetooth the identification number of the
tem and music device. devices for a maximum of communication system.
60 seconds, the green LED If requested, the security code
flashes twice per second. '0000' must be entered during
Start the search function of the pairing phase.
the music device for other
Bluetooth devices.
3
30
Pairing
Power supply
z
Battery care can be replaced by your author- collection centre or hand them in
4 The BMW Motorrad communic-
ised BMW Motorrad dealer. For to the retailer when you purchase
safety reasons, use only genuine replacements.
32 ation system is equipped with
BMW Motorrad rechargeable bat-
a nickel metal hydride battery
teries.
and has a total capacity of Charge status indicator
2400 mAh. Charging electronics
prevent overcharging of the ATTENTION
Power supply
Power supply
LED is OFF Maximum 1 hour of operating to a socket using the charging
period remaining cable supplied.
4
State of charge at 40 % Charge battery
Acoustic message "40 %"
LED is OFF
z
5
State of charge at 20 %
Acoustic message "20 %"
LED is OFF
Technical data
z
Radio connection
5 Transmit power <4 mW
36
Frequency range 2.402...2.483 GHz
Transmission method FHSS (Frequency Hopping Spread Spectrum)
Bluetooth standard 4.1
Bluetooth class max 4 mW, Class I
Technical data
Battery
Battery type NiMH (nickel metal hydride)
z Battery capacity 2400 mAh
Charging port Micro USB
Charging voltage 5V
Charge current max 1 A
General information
Weight approx. 160 g
5
37
Maximum permissible relative humidity max 90 %, non-condensating
Ambient-temperature range -20...60 °C, in operation
0...45 °C, when charging
Frequency response, voice 0.3...3.4 kHz
Technical data
Frequency response, music 0.06...20 kHz
z
z
38
5
Technical data
Appendix
Certificate for the BMW Motorrad
6
communication system . . . . . . . . . . . . . 40 39
Appendix
z
+HOPHWFRPPXQLFDWLRQV\VWHP
(XURSHDQ8QLRQ'HFODUDWLRQRI&RQIRUPLW\
+HUHE\ 3HLNHU DFXVWLF *PE+ GHFODUHV WKDW WKH UDGLR HTXLSPHQW W\SH %7 +6* LV LQ
FRPSOLDQFH ZLWK 'LUHFWLYH (8 7KH IXOO WH[W RI WKH (8 GHFODUDWLRQ RI FRQIRUPLW\ LV
DYDLODEOHDW WKH IROORZLQJ LQWHUQHW DGGUHVV KWWSZZZYDOHRFOLHQWSRUWDOFRP
Index
Operating panel
Bluetooth, 7
Telephone to helmet, 16 Overview, 10
C Control of music playback z
Communication Control of music playback, 14 P
Helmet to helmet, 15 Currency, 8 Pairing, 24
Music playback device to Deleting entries from
helmet, 18 G memory, 30
Navigation device and General views Helmet with helmet, 24
Operating panel, 10 Music device with helmet, 29
telephone to helmet, 20
Navigation device to helmet, 17 Navigation device with
H helmet, 27
Several devices, 20 Helmet
Telephone to helmet, 16 Closing, 12 Telephone with helmet, 26
Communication system S
Adjust the volume, 13 L
LED Status indicators
Information, 6 Overview of green LED, 11 Green LED, 11
Switching off, 13 Overview of red LED, 32 State of charge, 32
Switching on, 12 Switching off, 13
Switching on, 12
T
7 Technical data
Standards, 8
42
V
Volume
Adjusting, 13
Index
z
z
Index
43
7
Details described or illustrated Original operating instructions,
in this booklet may differ from printed in Germany.
the vehicle's actual specification
as purchased, the accessories
fitted or the national-market spe-
cification. No claims will be en-
tertained as a result of such dis-
crepancies.
Dimensions, weights, fuel con-
sumption and performance data
are quoted to the customary tol-
erances.
The right to modify designs,
equipment and accessories is
reserved.
Errors and omissions excepted.
*76518568246*