bizhub coe4eicze4eica: F PERIODICAL MAINTENANCE > 7. Petal macteanes
proces
7. Periodical maintenance procedure DF-701
Nove
* The alcohol described Inthe cleaning procedure of maintenance represents the Isopropyl alcohol
7.4 Take-up section
TAA. Cleaning of the pick-up rollerfeed roller
(1) Periodically cleaning partsicycle
+ Pick-up roller: Every 50,000 counts
+ Food rer: Every 80,000 courts
(@) Procedure
1. Open the lot cover [1
2, Using a leaning pad wth aleohol, wipe the pick-up role [1] feed
rober 2] lean of it
7A.2 Cleaning of the separation roller
(1) Periodically cleaning parts/eycle
+ Separation roller: Every 50,000 counts
(2) Procedure
41. Open the let cover [1].
2, Using a cleaning pad with alcohol, wipe the separation role 1
‘ean of it,
FeFP
ODICAL MAINTENANCE > 7, Periodical maintenance
bizhub C264eiC 2840102: recede OF70
7A.3 Replacing the plek-up rollerifeed rollor
(1), Periodically replaced parts/cycle
ap role: Every 200,000 counts
04 olor Every 200,000 counts
(2) Procedure
4. Open the ot cover (1
2, Remove the Eng [1] and the
Note:
‘+ When reinstalling the gear assy 2), push the
Ino position while rtating i
3, Remove he pin it].
NOTE.
+ Be careful not to ose the pin [1
4. Remove the screw [2] and remove the bearing [3
5. Remove the C-lp [1] and sie the bushing [2] into direction of
6, Remove the pickup colletioed roller 98593)
nore
‘+ When installing the pick-up rolerifeed roller assy, insert
the shat tothe spring [1
Faebizhuo C2b4elC 2840102240 F PERIODICAL MAINTENANCE > 7. Periodical
(4) Remove two C-ngs [1
a rat Rare the arm [2a thn
+ Be caroful not to lose the pin [3
8, Remove te C-rng [a] and the
rober assy (6
51, and remove he pickup
Bf pf iy
10, Remove wo lever [1
mM 11, Romave wo C-ng [1] and wo pins (2. and remove we Pek-up
rotors 3
Noe:
Be careful not to
the pin (2,
m 12. Romove tho C-ng [1] nd tho pin [2], and rome the arm (3
NOTE.
+ Be careful nett!
the pin (2
rm £2. Renove = “ng te pul] ane ger
14 Rerave in fan vomove ed oe
vl sl nowt
eee Be careful not os
the pin 4
lal 4
a
15. Reinstall the above parts folowing the moval stops in reverse
7A.4 Replacing the separation roller assy
(1) Periodically replaced partsicycle
+ Separation roler assy: Every 200,000 counts
E30bib C264e10 2040107 F PERIODICAL MAINTENANCE > 7, Periodical mantnance
Cece BE
(2) Procedure
4. Open thet cover (1).
2. Gep both sides [1] othe holter and remove the cover (2
(1)
3. Remove the separation roller asy [1].
‘+ Bo not ose the spring [2] at the ower part ofthe
separation roller assy [1
4, Relnstal he above pars following the removal tops in averse
7.2 Transport section
724. Cleaning of the miscellaneous rolls,
(1), Periodically cleaning parts/cycle
+ Miscolianeous rolls: Every 50,000 counts
(2) Procedure
4. Liftup the document fee tay.
2. Using a cleaning pad éampored wth alohol, wipe the rl (1
FatF PERIODICAL MAINTENANCE > 7, Periodical maintenance
bizhub Castetczs4e1Cz240 iro E704
3. Opon hole cover {1
4. Using cleaning pas dampened wi alcohol, wipe the rol 1)
5. Open the opening and closing guide (1)
6. Using 2 leaning pad dampened wi alahal wipe the rol (1).
7.2.2 Cleaning of the miscellaneous rollers
(1), Periodically cleaning partsicycle
+ Miscallaneousrllars: Every 50,000 counts
(2) Procedure
4. Litup the document food tray.
1
2 Using 2 leaning pad dampaned wih aleahol, wipe the rte)
FREFP
ODICAL MAINTENANCE > 7, Periodical maintenance
recede OF70
3. Opon hole cover {1
rm 4. Using cleaning pas dampened wih alcohol, wipe the roller (1)
8. Remove te fot cove,
Gott encore OF701)
6. Remeveinerea ener
Gin Rear cover (8-701)
7, tip the daument fod a
uy) ey 8: Remove he clo [ein fon Sie,
=) Vayiot he waning ro
nd set the document feed
9, Remove 10 screws [1], and remove the transport guid 2
NOTE.
‘Use care when mounting the screw [1] in the di
{one on the left when looking from the front)
aiforant from other nine screws [1]
circle
10. Using a clearing pad dampaned wi alcohol, wipe the rot)
Faebizhub Castel 284e1C2240
7.3. Scanning section
7.3.4. Cleaning of the front side scanning guide
(1) Periodically cleaning partsicycle
* Frontside scanning guide Every 80,000 counts
(2) Procedure
4. Open the dual ean document feeder,
(1)
7.32 Cleaning of the reflective sensor section
(1) Periodically cleaning parts/cycle
+ Reflective sensor section: Every 50,000 counts
(2) Procedure
2. Open the ual scan document feeder
F PERIODICAL MAINTENANCE > 7, Periodical maintenance
iro E704
11. Open the opening and closing gui 1}
12. Using a cesning pod dampened wth alcohol, wipe the rol 1)
2. Using a cleaning pad dampened with alohol, wipe the font side
scanning guide [clean of it
Note:
* Be careful not to damage the sheet,
1 Clean the sensor [using a brush or eter similar took,
Fabizhub cootelczeseicaz4e F PERIODICAL MAINTENANCE > 7, Periodical maintenance
(1)
P35bizhub coe4eicze4eica: F PERIODICAL MAINTENANCE > 8, Pera! macteanee
proces
8. Periodical maintenance procedure DF-624
Nove
* The alcohol described Inthe cleaning procedure of maintenance represents the Isopropyl alcohol
8.1 Take-up section
8.1.4 Cleaning of the pick-up rollerfeed roller
(1) Periodically cleaning partsicycle
+ Pick-up roller: Every 50,000 counts
+ Food rer Every 80,000 courts
(@) Procedure
1. Open the lot cover [1
2, Using a leaning pad wth aleohol, wipe the pick-up role [1] feed
rober 2] lean of it
8.1.2 Cleaning of the separation roller
(1) Periodically cleaning parts/eycle
+ Separation roller: Every 50,000 counts
(2) Procedure
41. Open the let cover (1.
2. Using a cleaning pad wi akoho wipe the separation all 1
0 cleancta
FeFP
ODICAL MAINTENANCE > 8, Periodic maintenance
bizhub C264eiC 2840102: rocegure OF-628
8.1.3 Replacing the plek-up rollerfeed rollor
(1), Periodically replaced parts/cycle
ap role: Every 200,000 counts
08 olor Every 200,000 counts
(2) Procedure
4. Open the ot cover (1
2, Remove the Eng [1] and the
Note:
‘+ When reinstalling the gear assy 2), push the
Ino position while rtating i
8, Remove he pin it].
NOTE.
+ Be careful notte lose the pin [1
4. Remove the screw [2] and remove the bearing [3
5, Remove te C-lp [1] and sie the bushing [2 into direction of
6, Remove the pickup colletioed roller 98593)
nore
ty ‘+ When installing the pick-up rolerfeed roller assy, insert
a the shat tothe spring [1
FTbizhuo C264elC 2840102240 F PERIODICAL MAINTENANCE > 8, Periodical
(4) Remove two C-ngs [1
ae rat Rare the arm [2 ath pn
+ Be caroful not to lose the pin [3
8, Remove te C-rng [a] and the
rober assy (6
51, and remove he pickup
Bf pf iy
10, Remove wo lever [1
mM 11, Romave wo C-ng [1] ara wo pins (2. and remove we pek-up
rotors 3
Noe:
Be careful not to
the pin (2,
m 12, Romove tho G-ng [1] nd tho pin [2], and rome the arm (3
NOTE.
+ Be careful nett
the pin (2
rm £2. Renove = eng te puley 2] ane ger
14 Rea im fan omar ed oe
vl sl nore
eee Be careful not os
the pin 4
lal 4
a
15. Reinstall the above parts folowing the rmoval stops in reverse
8.1.4 Replacing the separation roller assy
(1) Periodically replaced partsicycle
* Separation roler assy: Every 200,000 counts
Faebizhub cootelczeseicaz4e F PERIODICAL MAINTENANCE > 8, Periodical maintenance
(2) Procedure
4. Open thee covert).
2. Gep both sides [1] othe holter and remove the cover [2
U)
3. Remove he separation roller ay [1].
NOTE
* Donnotiose thes
separation roller
4, Relnstal he above pars following the removal tops in averse
8.2 Transport section
8.21 Cleaning of the miscellaneous rolls,
(1) Periodically cleaning parts/cycle
+ Miscolianeous rolls: Every 50,000 counts
(2) Procedure
4 Liftup the document feed tay.
2. Using a cleaning pad dampored with alcohol, wipe the rl (1)
oybizhub cootelczeseicaz4e F PERIODICAL MAINTENANCE > 8, Periodical maintenance
3. Opon hole cover {1
4. Using @ cleaning pas dampened wi alcoho, wipe the rol 1).
(1
8.2.2 Cleaning of the miscellaneous rollers
(1), Periodically cleaning parts/cycle
+ Misclianeous rollers: Every 50,000 counts
(2) Procedure
4. Litup the document feed tray.
10 2, Using a leaning pad dampened wit alcohol, wipe the rl)
3. Open hole cover [1].
4. Using 2 cleaning pad dampaned wih alcohol, wipe the rte)
Faobizhub coe4eicze4eica: F PERIODICAL MAINTENANCE > 8, Periodical maintenance
procedure braze
oT Es 5. Litup tho guido plato OF [1
216) 2) 6, Remove 11 screws [2], and remove the transport guide (3).
NOTE
+ Use care when mounting the serow [2] in the dashed circle
{one on the left when looking from the front since itis
diferent rom other 10 screws (2.
7. Using @ leaning pad damponed wi aloha, wipe the rl)
ih a
8.3 Scanning section
8.3.1 Cleaning of the scanning guide
(1) Periodically cleaning parts/eycle
+ Seanring guide: Every 50,000 counts
(2) Procedure
1, Open the reverse automate document fede,
(1)
2. Using a cleaning pad éamponod with alcohol, wipe the seaning
mere.
* Be careful not to damage the sheet
8.32 Cleaning of the reflective sensor section
(1) Periodically cleaning parts/cycle
+ Reflective sensor section: Every 50,000 counts
(2) Procedure
1. Caan the sensor] using a brush o the simi toes,
2. Open the reverse automatic docume
FatF PERIODICAL MAINTENANCE > 8, Periodical maintenance
rocegure OF-62e
2 Clean te reflectve par [i] using a bush or other similar tole
Faz