You are on page 1of 1

numbered LPZs and be protected against LEMP by relevant Surge Protection Measures (‘SPM’

as defined in BS EN 62305:2011).

SPM was previously referred to as a LEMP Protection Measures System (LPMS) in BS EN/IEC
62305:2006.

Figure 13 highlights the LPZ concept as applied to the structure and to SPM. The concept is
expanded upon in BS EN/IEC 62305-3 and BS EN/IEC 62305-4.

Selection of the most suitable SPM is made using the risk assessment in accordance with BS
EN/IEC 62305-2.

BS EN/IEC 62305-2 Risk management


BS EN/IEC 62305-2 is key to the correct implementation of BS EN/IEC 62305-3 and BS
EN/IEC 62305-4. The assessment and management of risk are now

You might also like