DYNAUDIO’ 30W54
TECHNOLOGY UNLIMITED
rr
12" woofer for
(qencOsUres of 800 140 tires
for 3-, 4~ an
Geeme tit When the
PHA cone allows old 3OW-54
midrange from 800 Hz came out
transmission line some years
bassreflex sealed or ago it soon
aperiodic damped got famous to be
‘enclosures the best 12" woofer ee
for high end high “\ y
fidelity systems. Now
we have improved some
magnesium die cast important speci
Daskol wth aeredynamie rise Making Ins cones tow Ih
very high power handling ur own plant of special
vented long throw magnet system polymer/oxide mixture the
low distortion frequency response runs straight
hacacoll technique giving an even higher definition of complex
PHA-cone material music, The new long throw magnet system allows
{phase homogeneous area) __cone displacement of 1* (25 mm) so it can be used
DIL-system : even in transmission line systems, The proven basket
diynamic transientlinearity) with the aerodynamic ribs integrates the complete vented magnet system.
‘opic proof The hexacoil technique allows high power handling and the DTL-system
high BL-factor reduces the rise time by the factor 10!
‘The STEP-FUNCTION of a 12” woofer normally has a slow rise, not much steeper
than the dropping due to the heavy weight of big systems. The step function to
the right shows the efficency of our pat. DTL-system. The rise time is reduced to
1/10. The copper capsule around the pole piece is extended and acts as a mag-
netic short circuit to the voice coil. The iron in the pole piece normally creates
unlinearites to the voice coil which now is eleminated.
Tone bursts are the best way to obtain an accurate picture of overall acoustic performance. Regrettably they
are mostly used only to test rise-time and ringing - which shows much more clearly with a step funktion test!
With a tone burst, all the moving paris of a speaker can be loaded without burning the voice coil. With agiven
frequency the SPL should be 30dB higher at 1000 W input when compared with a 1 W input, if the output is linear.
This test shows the driver's ability to reproduce the transients without compression. The right picture shows
that even a 1000 W input is not the limit: the dynamic response is absolutely linear. Data given in catalogues (and
even test reports) normally are
calculated figures and not ®
measuredvalues.
This compression effect s either
under-rated or ignored very often.
That is why many speakers do not
produce SPL’s above 10048, in
spite of higher theoretical speci-
fications. However this test ;
exposes such anomalies between
calculations and actual
measurements.DYNAUDIO’
_ Sloss ene
vee 50
PT ieetbeed
sect Bm
ant fans 20 tx we syne.
roaeh Oh 408 BOE TTT
San Krys rec. RM
ores Bae te Mee bode Tine
‘The narrow impedance peak at resonance under free air measurement indicates:
strong magnetic damping and energy. In enclosure the impedance is flat and
balanced.
Pee trek B mine
Beye ee
‘With a 808 filter the 30 W-54 is excellent usable up to 1000 Hz. The acoustic
phase is linear even beyond that point.
pt Sa aur
=
“semse
Ee er Ses tae
The scale was raised by 20 dB for this measurement.
Fosse pemanues aces
‘suspension Cms 115: 10-SmvN Power handling:
acoustic Cag 185° 10m IN “nominal ‘ON 210W
Sots ee mee
oa a me eon
eff. cone area Sp 40dem? — factor:
eee eet eee eta
Tin vome dlacement Vi zadem? etic es oa
po erate Heese ce s
ee ee eh meatier a
presales BS
oma eee er
cae ee
ee cae oat anes ‘ ce
— on ; i
wares feet ee : :
‘flux density 091 Tesla ‘inductance (1 kHz) be 0.25mi
cece rasan Poe rps = 7
nee mere antes gee
‘ar gap vlume \o 25Tem? DC resistance Re 6250
zero “BM oascnean este href
eh Se bomen abbe ano
Thiele parereters are measured rt statically bt dyraically.
Replat stec cence wnonnaes
‘Combining different materials together
requires experience and know how
about the behavior even under extrem
Conditions. ~ Here we glue aluminium
former to the fabric spider. An exact
amount of high temperature resistant
glue is precisely placed to the
‘spiders neck. The voice coil of the
woofer survives temperature peaks of
‘even 400 to 650° F (800-400°C).
Furthermore the connection point has
to withstand accelerations of some
hundred miles/h altering the direction
‘some thousand times per second.