CCG
Creu
ih)
as Oe a) 6 em eae ay, tae
JUNCTION BOXES for Hazardous Pee oe
ee
High temperature resistance and anfrstlic properties
DIN Rail mounting siuds are provided for use with terminal blocks
Roised domed lid facilitates connections to be made outside of the box.
Only approved CCG cable glands and non-sparking terminals must be
used.
Dust and watertight 0 1P66/68 when fited with
coble glands.
Boxes can be buried for extended periods.
Boxes with see through polycarbonate “adoptatids" available on request
4Way and HBoxes with parallel entries available on request
prone
Type: Posi Fi™ 4.Way Junction Box
Posi Fit Y Junction Box
Pos Fi™H Junction Box
Box Material Impact corrosion and UV resistant glass reinforced polyester compound.
Optional Accessories Ex Cerified Terminals, 4-Blonking plugs provided and Box Spanner (id Locking Key
ree ke
Hazardous Area Clessification: CNEx: Zone 1, 2,21 and 22 Ex e IC DIP A21
SANS/IEC, ANZEx: Zone 1, 2, 21, 22 and Ex eC T6 Gb, Ex WAC TS Ge, Bx tHIC T70°C Db
ATEX Finished: I12 GD, IIC T6 Gb, Bx th HIC T70°C De /113 GD, Ex nAIC T6 Ge, Ex te IC T70°C De
ATEX: Unfinished: IL2 GD, IC Gb, &x tb IIC Db /113 GD, Ex nA IC Ge, Ex tell De
Certification: Standards:
Australian/New Zealand/IEC ANZEx 13.4127X (Finishes 600790, IEC 600797, IEC 60079-15, IEC 60079-31, IEC 60529
ANZEx 13.412BU (Unfinished) 600790, IEC 60079-7, IEC 6079-15, IEC 60079:31, IEC 60529
CML 14 ATEX 3036X (Finished) N 600797, EN 6007931
CML 14 ATEX 4038X (Finished) EN 60079-15, EN 6079-31
CML 14 ATEX 3037U (Unfinished) EN 60079.0, EN 60079-7, EN 6007931
CML 14 ATEX 4039U (Unfinished) EN 60079.0, EN 60079-15, EN 6007931
Chinese CNEx 09.0430X GB3836-1, GB3836,3 , GB12476.
Marine 145G1246755-1-PDA
SANS/SABS/IEC MASC $/10216X (Finished) SANS/IEC60079-0, SANS/IEC60079-7 SANS/IEC6O07915,
1ASC S/10216U (Unfinished) SANS/IEC60079-31,SANS/IEC60529
Ambient Temperature: 40°C fo +55°C (Finished)
Service Temperature: 40°C fo +110°C (Unfinished)
Ingress Protection 1P66/67/68 (2m cont)
@G-cc Ad ws 2 Eaps
Tut ee
Mhe COG ed locking Fey musts wied fo open and lose unis hat donot ave locking screws sucesso cover UN
\When ited wi the polycarbona the equipment must be insaled to prove the generation ofelecosaic charge.
\When fied wi the clea id, the unit mus be installed fo prevent UV exposure to the infernal components ited.
nly the leinal blocks as per the description may be uilsed inthe uncon bex. Specific instalation condtions as se by the leninal
manufacturer /leminal cetfication must be considered, Ths includes considering the use ofthe applicable partons and end plates for terminal
blocks, conductor installation, ighlening down of terminal block screws et.
eel Ba as Mo Le ROS I SSCS NTS WES
The creepoge and clearance between lerminal locks and fram the ferminal black to any earthed / bonded malic part must comply wih
EC 600797 requirements for he applicable vllage ofthe terminal blocks.
Suitably cerlfied glands / plugs must be used in the threaded entries.
Information vith relation o entries is indicated inthe instructions
Installation must be carried out by a competent person,
The box must not be modified in any way, as this will invalidate the certification.
‘When fited with ony intemal components the assembly mus be re-eriied and the cover remarked accordingly
‘Where cables enter the box they must be secured by CCG Cable Glands appropriate lo the make up ofthe cable.
Unused enity apertures must be blanked wih cerified CCG Blanking Plugs.
To mainiain 1°66/68 a thread seal gaske! between the box and cable gland mus! be installed.
Before replacing the lid, ensure the lid gasket isin place,
The use of a CCG Box Spanner (lid Locking Key) is required to maintain the tamper proof intagrity ofthe box, reer Figure |a
for hazardous installations
Distance
Henry
Movaing ail oo
eae Hei
TO090MI6
10090
100901-m16|
100901
To0902M16
10090220
00902
100903
100903.
100908.
[Al dimensions or in rm.
+ Dierent arrangement of.
abl on requet a sloted above
CCG
ar
for hazardous installations
aor
kL eee
i
wry sizes ae avilable on requed as stole above.GCG]
Gi
for hazardous installations for hazardous installations
Product Code
eco
raveNTED
oA ie ung
ean Z
seed reins
10020144
roa20zHi6|
ro0s0zHM20|
2H
All dimensions are in mn,
401800
401801
401802
401803
“Different erongomeri of erry sizes ore oveilobe on request os saad above
52721
5272!
352732Wiring and Installation instruc peaked
®Insialtion must be cared out by o competent person
Do net install under live curent conditions
The box mus nol be modified in any way, as this wil invalidate the caification,
‘All witing must be carried out in accordance with he relevant Codes of Practice,
The wiring insulation must nol extend by more than
terminal as shown in Figure 2.
Orn from the metal face ofthe
The vollage and curren’ value ofthe box must nat be exceeded. See relevant celica fo
curren limitations for conditions of use / schedule o imitations
Only those terminals shown in the terminal schedule may be incorporated in the box,
refer Table 1
Inner cable bedding must protrude into the box by 0 minimum of 20mm pos! the cable
entry point
Not more than one single or mulple strand lead shall be connected into either side of
the terminal
Only earh conductors of equal szo shall be connected with rail mounted terminals
AAllYerminal scrows used and unused shall be tightened
A parallel sha screw driver ofthe correct size should be used for rail mounted terminals
Where cables enter the box they must be secured by CCG Cable Glands appropriate to
the make up of the cable
Unused entry apertures must be blanked with certified CCG Blanking Plugs
To maintain P66/68 « thread seal gasket between the box and cable gland mus! be
stalled,
Before replacing the ld, ensure the lid gasket is in place
The use of a CCG Box Spanner lid Locking Key is require
proof integily ofthe box, refer Figure
COC)
To ensure the box apparatus tamper proo:
Screw on ighien and lok id in place by means of
CCG Box Spanner lid Lacking Key.
FIGURE 1
=
cg
Mex
Teminal Type
favor
ond Sie
Aron miisarninal] 8 “sn in trial
‘ro? in rial
Terminal Type
‘on 528
2.5mm?
son?
1m?
1m?
25m?
en? ii ermine
ron?
Pei & Way
Pei A Way
1m
Ven? 2.5mm?
‘ro? ii ei
Onn
én?
Tone?
rn? mii erminal
Aron?
én?
ri arn
i not extend by
Ar? ii emia
the metal face af he
fer more than
én? 28
0m? 2
én? 18
35m? 4
mm? 10
rei a Way
Posi Woy | 4
\VOSTAGE FER TERMINAL CONFIGURATION Aajutable
Kz 4
wou 25
wou 4
woUs
wou 10
WOU 16
wou
Box pe Terminal ype
Pout H Box
Pout H Box
Box
Box
Box
(ss
1515 Mil
S35 Top a Temi
"oi 25 to
Tel: South Arca 477 11 3942020/1, Australia 1300 CABLE GLANDS {1300 222 534), Hong Kong +852 2427 2090
Singapore +65 6 8471 002, South Korea +82 10'8783 1780, United Kingdom + 44 1 642 480346, United Arab Emirates +971 6 5527781