Professional Documents
Culture Documents
BAR LOADER
CNC
1/select program
2/set machining length
3/to prevent collision retract all the tool
platforms
4/ remove spindle covers
5/remove collets and bushes
6/back off the spindle pressure
7/feed the bar into the machine
8/ ensure the correct ejection pin and pickup
blocks are set
9/Reset the correct size collets and bushes and
set it to correct pressures
10/Change required tips
11/Set coolant pipes
12/Go through start up procedure
13/slowly run through program
14/Check and adjust offsets accordingly
15/Perform quality checks
16/Do first offs
17/Set counters
18/Set basket for produced parts
19/Run job