Professional Documents
Culture Documents
LARGE IC CUSHION
25000 – 100000 LBS. SPECIFICATIONS
► T HDC2500-3500-24
► T HDC2500-5000-30
► T HDC3000-5500-36
CLASS
INDUSTRIES
General General
Steel/Metals Factory
Manufacturing Warehousing
STANDARD FEATURES
DURABILITY
• Large drum-type brakes •H eavy-duty isolated anti-vibration bolt-in • Two-part rust-inhibiting polyurethane base
• Heavy duty planetary drive axle rated for drive line mounts coat and two-part polyurethane top coat
durability in high-capacity applications •M ast pivots constructed with wear- for corrosion protection
• Rigidly constructed, welded frame resistant steel bushings and hardened • Rubber-mounted cab, isolated from the
• Built-in engine protection system steel pins frame to reduce noise and vibration
• High-Capacity cooling system • 2 stage wide visible mast (V) • High-visibility carriage with integral side
• Bolted open core radiator •2 stage mast w/ free lift (FV) thrust rollers
• Heavy-duty mast rails (45K to 55K models) • High-impact greaseable
• Lift cylinders secured behind mast rails •D ual action bolt-on steer cylinder protected composite trunnions
• Lubricated and sealed main rollers by heavy steel support beams • Hook-type forks
• Impact resistant main/side thrust rollers •S ealed tapered roller bearings
• Greaseable mast pivots •H eavy steel frame cross supports
SAFETY
• Electrical horn • I ntegrated overhead guard • Operator Presence Sensing System (OPSS)
• Asbestos free components •O perator Restraint System seat
• Neutral safety switch •O range forks
PERFORMANCE
• PSI 5.7L V8 engine (LP) •F ull hydraulic power steering - Parking brake indicator
• Dana model 32000 transmission •W arning light for parking brake (Release) - High engine temperature indicator
- 3FWD/3REV speed automatic •L ift and lashing points - Low engine pressure indicator
- True inching system • I llimunated digital instrument display - High transmission temperature indicator
- Integral cooling pump (dedicated) - Hydraulic filter plugged warning - Engine over-speed indicator
- Remote mounted filter - Air filter plugged warning - Low battery indicator
- 12 plate modulation - Transmission filter plugged warning - Service meter warning
• 2-function hydraulic control valve (lift/tilt) - Check engine light
• Independent brake & inching pedals - Low fuel level indicator
ERGONOMICS
• Mast mounted LED Headlights (2) •L
eft-hand shift lever • Low-height non-skid steps
• LED rear combination lights (2) •L
ong operator assist grips • Padded floor mat
• Finger-tip hydraulic controls •V
inyl adjustable semi-suspension seat
• Tilt steering column •H
and-actuated disc-type parking brake
SERVICEABILITY
• Easy-access service panels •P
arker pumps, valves and seals • Fully sealed headlights and auxiliary lights
• Hydraulic pump, hoses, tubes, and •O
-ring face seal fittings on the entire • Low chassis side plate allows easy access
wiring harness are accessible and hydraulic system to the drive train
easy to inspect •E
lectrical box located inside the cab • Swing-out LP tank brackets (2)
• Hydraulic multi-gauge •C
olor coded wires enclosed with split- • Hinged side doors provide excellent access
• Chrome-plated rods (lift, tilt and steer tubing wire-loom wrap to engine compartment
cylinders) for easy seal replacement •A
nti-restart ignition switch
* For higher capacity inquiries, please see your local, authorized Toyota dealer for more information.
02
OPTIONAL EQUIPMENT
MASTS POWERTRAIN CHASSIS OPTIONS
• Wide Visible Mast (V) • Pre-cleaner • Counterweight Towpin
• Full-Free Lift Two-Stage Mast (FV) •E ngine Block Heater • Bellypan Kit
• Full-Free Lift Three-Stage Mast (FSV)
CARRIAGE
• Carriage Bumper Blocks •T
ilt Control (Forward) • Standard Taper Forks
• Pin-Type Carriage •T
ilt Control (Rearward) • Coil Contour Forks
• Integral Side Shifting Fork Positioner •T
ilt Control (Forward and Rearward)
• Polypad, Forks •T
ilt Level Indicator
TIRE/WHEEL
• Lugged Rubber Drive Tires •H
igh-Load Poly Drive Tires • High-Load Poly Steer Tires
• Non-Marking Rubber Drive Tires •V
ulkollan Drive Tires • Vulkollan Steer Tires
• Poly Drive Tires •N
on-Marking Rubber Steer Tires
• Grooved Poly Drive Tires •P
oly Steer Tires
CAB/CONTROLS
• Air Conditioning •O
range Seatbelt • Lexan, Rear
• Heater •O
range Seatbelt with Switch • Glass, Front
• Cab w/ Soft Doors •C
loth Semi-Suspension Seat • Glass, Top
• Cab w/ Steel Doors •A
ir Ride Seat • Glass, Rear
• Front Wiper/Washer •S
teering Wheel w/ Knob • Operator Compartment Fan
• Rear Wiper/Washer •L
exan, Front • Mechanical Controls
• Blackseatbelt with Switch •L
exan, Top • Hydraulic Controls
CAB RISER
• 13” Riser, LH Seat • 1 3” Riser, Center Seat with Cab Tilt • 20” Riser, LH Seat with Cab Tilt
• 13” Riser, Center Seat •2 0” Riser, LH Seat • 20” Riser, Center Seat with Cab Tilt
• 13” Riser, LH Seat with Cab Tilt •2 0” Riser, Center Seat
LIGHTS/ALARMS
• Amber Strobe Light •S
trobe Light Guard • Turn Signal Light Kit
• Blue Strobe Light •F
orward Facing Blue Light* • Single Forward Facing LED
• Red Strobe Light •R
ear Facing Blue Light* Worklight (Additional)
• Clear Strobe Light •F
orward & Rear Facing Blue Light* • Single Rear Facing LED Worklight
• Amber Strobe Light (Additional) •F
orward Facing Red Light* • Extra Work Lights- LED Forward
• Blue Strobe Light (Additional) •R
ear Facing Red Light* Facing (pair)
• Red Strobe Light (Additional) •F
orward & Rear Facing Red Light* • Extra Work Lights- LED Rearward
• Clear Strobe Light (Additional) •S
ide Mount ‘Red Zone’ Pedestrian Light Facing (pair)
HYDRAULIC
• Low Nitrogen Warning System, •L
ift Accumulator • Tilt Accumulator
Steer/Brake Accumulator
03
HIGH-CAPACITY LARGE IC CUSHION
Maximum Travel Full Load mph (km/h) 9.7 (15.6) 9.7 (15.6) 9.7 (15.6) 9.7 (15.6)
(fwd. / rev.) No Load mph (km/h) 9.7 (15.6) 9.7 (15.6) 9.7 (15.6) 9.7 (15.6)
Full Load fpm (mm/sec) 61 (310) 61 (310) 58 (295) 61 (310)
Speeds Lifting
No Load fpm (mm/sec) 65 (330) 65 (330) 65 (330) 65 (330)
Full Load fpm (mm/sec) 24 (122) 24 (122) 24 (122) 24 (122)
Lowering
No Load fpm (mm/sec) 17 (86) 17 (86) 17 (86) 17 (86)
Full Load lb (kg) 25573 (113.7) 25447 (113.2) 25335 (112.7) 25545 (113.6)
Drawbar Pull Maximum
No Load lb (kg) 9714 (43.2) 9468 (42.1) 8694 (38.7) 9606 (42.7)
Full Load % 73.7 67.1 62.9 69.9
Gradeability
Maximum
@ .9 Coef* No Load % 42.5 37.1 33.3 41.1
Make / Model PSI V8 5.7L PSI V8 5.7L PSI V8 5.7L PSI V8 5.7L
Rated Horsepower
Internal Combustion SAE HP 147 @ 2500 rpm 147 @ 2500 rpm 147 @ 2500 rpm 147 @ 2500 rpm
@ rpm
Engine
Rated Torque @ rpm SAE ft-lb 300 @ 1600 rpm 300 @ 1600 rpm 300 @ 1600 rpm 300 @ 1600 rpm
Number of Cylinders 8 8 8 8
Type POWERSHIFT (Autoshift) POWERSHIFT (Autoshift) POWERSHIFT (Autoshift) POWERSHIFT (Autoshift)
Transmission
Speeds (forward / reverse) 3/3 3/3 3/3 3/3
Auxiliary Hydraulic Max. Operating Pressure psi (kg/cm2) 2500 (176) 2500 (176) 2500 (176) 2500 (176)
Function Specifications
(for attachments)4 Max. Flow Rate gpm (lpm) 54 (204.4) 54 (204.4) 54 (204.4) 54 (204.4)
* Computed values
1 Measured with standard forks
2 Centerline of front axle to front face of forks
3 Add load length and clearance
4 Values taken at hydraulic control valve. Does not take into consideration losses through mast plumbing (hosing, fittings, QD’s, etc.).
04
MODEL NUMBERS
Maximum Travel Full Load mph (km/h) 9.7 (15.6) 9.7 (15.6) 9.7 (15.6)
(fwd. / rev.) No Load mph (km/h) 9.7 (15.6) 9.7 (15.6) 9.7 (15.6)
Full Load fpm (mm/sec) 61 (310) 41 (208) 41 (208)
Speeds Lifting
No Load fpm (mm/sec) 65 (330) 44 (223) 44 (223)
Full Load fpm (mm/sec) 24 (122) 24 (122) 24 (122)
Lowering
No Load fpm (mm/sec) 17 (86) 16 (81) 16 (81)
Full Load lb (kg) 25426 (113.1) 25102 (111.7) 24976 (111.1)
Drawbar Pull Maximum
No Load lb (kg) 8820 (39.2) 9852 (43.8) 9252 (41.1)
Full Load % 64.7 49.8 46.6
Gradeability
Maximum
@ .9 Coef* No Load % 36.3 27.4 25
* Computed values
1 Measured with standard forks
2 Centerline of front axle to front face of forks
3 Add load length and clearance
4 Values taken at hydraulic control valve. Does not take into consideration losses through mast plumbing (hosing, fittings, QD’s, etc.).
05
HIGH-CAPACITY LARGE IC CUSHION
Maximum Travel Full Load mph (km/h) 10.3 (16.6) 9.7 (15.6) 9.7 (15.6)
(fwd. / rev.) No Load mph (km/h) 10.3 (16.6) 9.7 (15.6) 9.7 (15.6)
Full Load fpm (mm/sec) 20 (102) 58 (295) 41 (208)
Speeds Lifting
No Load fpm (mm/sec) 21 (106) 65 (330) 44 (223)
Full Load fpm (mm/sec) 21 (106) 24 (122) 24 (122)
Lowering
No Load fpm (mm/sec) 12 (61) 17 (86) 16 (81)
Full Load lb (kg) 23211 (103.2) 25393 (112.9) 25065 (111.5)
Drawbar Pull Maximum
No Load lb (kg) 14880 (66.2) 86.28 (38.4) 9384 (41.7)
Full Load % 34.7 61.2 47.4
Gradeability
Maximum
@ .9 Coef* No Load % 19.5 35.2 26.6
* Computed values
1 Measured with standard forks
2 Centerline of front axle to front face of forks
3 Add load length and clearance
4 Values taken at hydraulic control valve. Does not take into consideration losses through mast plumbing (hosing, fittings, QD’s, etc.).
06
MODEL NUMBERS
Maximum Travel Full Load mph (km/h) 10.3 (16.6) 10.3 (16.6) 10.3 (16.6)
(fwd. / rev.) No Load mph (km/h) 10.3 (16.6) 10.3 (16.6) 10.3 (16.6)
Full Load fpm (mm/sec) 20 (102) 20 (102) 20 (102)
Speeds Lifting
No Load fpm (mm/sec) 21 (106) 21 (106) 21 (106)
Full Load fpm (mm/sec) 21 (106) 21 (106) 21 (106)
Lowering
No Load fpm (mm/sec) 12 (61) 12 (61) 12 (61)
Full Load lb (kg) 23301 (103.6) 23167 (103.0) 23034 (102.5)
Drawbar Pull Maximum
No Load lb (kg) 15012 (66.8) 14484 (64.4) 65 (330)
Full Load % 35.3 33.3 31.5
Gradeability
Maximum
@ .9 Coef* No Load % 20.6 19 17.6
* Computed values
1 Measured with standard forks
2 Centerline of front axle to front face of forks
3 Add load length and clearance
4 Values taken at hydraulic control valve. Does not take into consideration losses through mast plumbing (hosing, fittings, QD’s, etc.).
07
HIGH-CAPACITY LARGE IC CUSHION
EXTERIOR DIMENSIONS
G D O P
C
M
H B
A J
Q R
C L N
F
08
HIGH-CAPACITY LARGE IC CUSHION
MAST SPECIFICATIONS
OVERALL HEIGHT FREE-LIFT
TILT RANGE
MAXIMUM LOAD CAPACITY AT
FORK HEIGHT WITH STANDARD 24 IN. (610 MM)
MAST TYPE (TOP OF FORKS) LOWERED LOAD CENTER
LOAD BACKREST FWD BWD
10
OVERALL HEIGHT FREE-LIFT
TILT RANGE
MAXIMUM LOAD CAPACITY AT
FORK HEIGHT WITH STANDARD 24 IN. (610 MM)
MAST TYPE (TOP OF FORKS) LOWERED LOAD CENTER
LOAD BACKREST FWD BWD
11
HIGH-CAPACITY LARGE IC CUSHION
MAST SPECIFICATIONS
OVERALL HEIGHT FREE-LIFT
TILT RANGE
MAXIMUM LOAD CAPACITY AT
FORK HEIGHT WITH STANDARD 30 IN. (762 MM)
MAST TYPE (TOP OF FORKS) LOWERED LOAD CENTER
LOAD BACKREST FWD BWD
12
OVERALL HEIGHT FREE-LIFT
TILT RANGE
MAXIMUM LOAD CAPACITY AT
FORK HEIGHT WITH STANDARD 30 IN. (762 MM)
MAST TYPE (TOP OF FORKS) LOWERED LOAD CENTER
LOAD BACKREST FWD BWD
Full Free-Lift 2-Stage 100 (2540) 118 (2997) 55 (1397) 8 8 50000 (22680)
(FV)
124 (3150) 130 (3302) 55 (1397) 8 8 50000 (22680)
13
HIGH-CAPACITY LARGE IC CUSHION
MAST SPECIFICATIONS
OVERALL HEIGHT FREE-LIFT
TILT RANGE
MAXIMUM LOAD CAPACITY AT
FORK HEIGHT WITH STANDARD 36 IN. (914 MM)
MAST TYPE (TOP OF FORKS) LOWERED LOAD CENTER
LOAD BACKREST FWD BWD
Full Free-Lift 2-Stage 100 (2540) 118 (2998) 55 (1397) 8 8 45000 (20411)
(FV)
124 (3150) 130 (3302) 53 (1346) 8 8 45000 (20411)
Full Free-Lift 2-Stage 100 (2540) 118 (2998) 55 (1397) 8 8 50000 (22680)
(FV)
124 (3150) 130 (3302) 53 (1346) 8 8 50000 (22680)
Full Free-Lift 2-Stage 100 (2540) 118 (2998) 55 (1397) 8 8 55000 (24948)
(FV)
124 (3150) 130 (3302) 53 (1346) 8 8 55000 (24948)
14
15
Some product features described herein are optional. Please consult your dealer for specifications.
Details of specifications and equipment are based on information available at time of printing and may
change without notice.
00722THDC2500SS
©2017 Toyota Material Handling, U.S.A., Inc.