Professional Documents
Culture Documents
General Description 3
Operating Data 4
HRC4 5
Dimensions 6
HRC2 12
Dimensions 13
HRCP 15
Service Parts 25
Operation
HRCs are fed a constant input pressure, from which they create
reduced output pressures that vary proportionally with lever or pedal
stroke. When the HRC is operated, output pilot pressure flows to
the main directional control valves, precisely controlling main spool
position and direction.
• Higher productivity. The use of an HRC allows better insulation between the cab,
engine and other machine parts. Lower hysteresis provides
HRCs require very little operator effort, increasing more superior control and as a result reduces vehicle shock and
productivity from both man and machine. subsequent noise levels.
Excellent pressure metering capabilities allows precise control The HRC needs only low working pressure, about 30 bar (435
of work functions and less wear and tear on the application. psi). Reducing the risk to the operator in a situation of pipe
failure.
• Freedom of system design.
Operating Data
HRC4 HRC2 HRCP-A HRCP-B HRCP-C HRCP-D HRCP-E HRCP-F HRCP-G HRCP-H
Max. inlet pressure (bar) 100 50 100 100 100 50 100 100 100 100
Output pressure (bar) 0~30 0~28 0~27 0~28 0~28 0~30 0~27 0~28 0~28 0~27
Operation torque (NM) 5~36.7 2.4~32.6 55~160 60~173.8 5~135 1.6~43.8 55~160 5~135 60~170.8 55~160
Description
The “HRC4” series is a double function valve that may be fitted with many different styles
of hand-operated levers. This unit is typically used to control two double acting spools using
a single joystick-style actuator. This provides a single-handed, user-friendly device to control Functional Symbol
two separate functions.
108
4- 7 THRU
(P.C.D 113)
4
1
38
17.5 17.5
P
108
2
29 29
113
6-PF 1/4 O-ring port
Fitting tightening torque:40.8±2 N.m 6-PF 1/4 O-ring port*
Fitting tightening torque: 37+3.0 N.m
Position 6: Code 8
107 33
90
4- 7
(P.C.D. 113 - 100)
27
76 63
Description Button
• P and T ports Continuous rated current of switch:
• Four work ports DC30Vx6A
• All located on the underside of the valve
• Single ~ Two electric button switch
Spring back
Dimensions
mm
Description Button
• P and T ports Continuous rated current of switch:
• Four work ports DC30Vx6A
• All located on the underside of the valve
• Single electric button switch
Spring back
Dimensions
mm
Tilted direction
THRU
of handle (RH)
4 Tilted direction
P of connector (LH
1
3
T
2
72 113
Tilted direction
of handle (LH)
345
108
4- 7 THRU
31 (P.C.D 113)
4
1
38
(800)
17.5 17.5
P
108
2
92
3
29 29
113
Description Button
• P and T ports Continuous rated current of switch:
• Four work ports DC30Vx6A
• All located on the underside of the valve
• Three electric button switch
Spring back
Dimensions
mm
Switch”3”
Switch”2”
Switch”1”
Single operating angle
(Ports 1,3) 19° 21.5°
45° 45°
Single 4- 7 THRU
23° operating
25° 72
4
P P.C.D
angle 1
108
3
(Ports 2,4) T 2
P.C
.D
(265)
113
15°
45°
108
(389)
(Lean center position)
108
4- 7 T
(P.C.D
4
1
31
38
17.5 17.5
9
P
108
2
(350)
3
85
29 29
113
JIS D5403 CA104
Male & Female of 6-PF 1/4 O-ring port
automobile parts (each 1EA) Fitting tightening torque: 37+3.0
86
Description Button
• P and T ports Continuous rated current of switch:
• Four work ports DC30Vx6A
• All located on the underside of the valve
• Two electric button switch
• One electric proportional switch
• FNR (Front and Reverse) switch is optional
Spring back
Proportional Switch
Roration VS SW Layout Electric Switch SPEC Connector SPEC.
+26°
-26° +26° P1 P1-Red P1-Black
-26° P1-Blue
P1 S2-Yellow S2-Yellow
S1-White S1-White
Output Voltage
2. Proportional Switch (P1) 2. Center Location: 0°±3° 4V±150mV
4V (+26°) Red (+5V) 3. Centering: Spring Centering
2.5V
-26°
Dimensions
mm S/W (P1)
19°(Single)
363
25°(Double)
Port #3 Port #1
Operating Angle 19° Operating Angle 19°
84
Description Button
• P and T ports Continuous rated current of switch:
• Four work ports DC30Vx6A
• All located on the underside of the valve
• Four electric button switch
Spring back
Dimensions
mm
#1
Double S/W #2
Left Double S/W
Right
#3
Front S/W
19° Single #4
25° Rear S/W
19° Dou
ble
(Nut ~ Top)
198
280
View R
23
8
84
86
Description PT
The “HRC2” series is the most basic form of HRC. It is typically used to control a dozer or
similar single function. As with all HRC models, this valve operates on the pressure reducing
concept, using a constant inlet pressure, and providing a metered variable outlet pressure
as a direct result of the lever displacement.
1 2
Functional Symbol
Repeat as needed up
to 8 sections
Description Button
• P and T ports (Side) Continuous rated current of switch:
• Two work ports (Underside) DC30Vx6A
• With or without single button
Spring back
Dimensions
mm
22 22
277.3
(7)
27
150 106.5
T
89
34
1 2 4-PF 1/4
Gasket Type
22
2- 8.5 THRU
32
31 31
39 51
50 0.15 52 0.15
57 69
Description Button
• P and T ports (Side) Continuous rated current of switch:
• Six work ports (Underside) DC30Vx6A
• With or without single button
Functional symbol
P T
Spring back
1 2 3 4 5 6
Dimensions
mm
45 45
A 20
23.5° 23.5°
193
283
32 32
4.5
Stamping of
32 32
37
Model Name
T Serial No.
T (Detail -A-)
22
B
25
85.5
90
B P
P
P, T Port
40
39 39
P, T Port 135
55 55
UNF 9/16-18 UNF-2B 147
110
98 6-UNF 9/16-18 UNF-2B 16 16 Stamping of A,B Port
B A 7
4-
6 5
45
A A
4 3
45
A B
22.5
2 1
View A View C
Description
The “HRCP” series is a single or dual pedal valve. Typically used to control a single double-
acting spool as a travel pedal on a tracked vehicle. As with all HRC models, this valve
operates on the pressure reducing concept, using a constant inlet pressure, and providing a
metered variable outlet pressure as a direct result of the pedal displacement.
HRCP A 1 A01 00 D A
1,2,3,4 5 6 7,8,9 10,11 12 13
1 2 3 4
Dimensions
mm
62
66
19
50 2x2-M10x1.5 DP15
73 66
60.5
29
9
197 T Port 74
P Port
136.5
33.5
29
98 54 54
150 108
130 4-PF1/4 0-ring port 2-PF1/4 Q-ring port
50
Tightening torque 370 20kgf.cm Tightening torque 370 20kgf.cm
2 1
106
66
4 3
4- 11.5THRU
1 2 3 4
Dimensions
mm
88.5 42 84 10 84
11.5
12
18
1
38.4
30 133
36
4- 12
8.5
153 5 12.4 1.1 12.4 1.1
307 5 89.7
60.5 (75)
29 1.5
9
2-PF 1/4
Stamping of model name
O-ring seal
Sercal No.
Tightening torque 370 20kg.cm
105 Location of ports name
25
(P, T)
31
4-PF 1/4
100 1 58
O-ring seal
150 1.5 Tightening torque 370 20kg.cm 130 1
134 2
4.5
1 2
40
4.5
94
3 4
25 25
4- 11 THRU Stamping of ports name
130 0.2 (1, 2, 3, 4)
1 2
Dimensions
mm
174 113
42 88.5
30
12
2- 12
133
36°
153
8.5°
89.7 307
(75) 60.5 12°
7 29 2- 11
9
28
49
26
T
24 +0.3
D
27 25 15.6+0.1
15° D
V -R0.1~0.3 0.5
P
31 12.5
2.5 +0.3
D
1 45°
36 30
PF 1/4 100
PF 1/4 0-Ring port 130
150
30
50
4.5
2 1
40
86
4.5
PF 1/4
50
T
A
P
Dimensions
mm
40°±1
20° +2
-D
298
(220)
42
13 +0
-1
78 43.5 73.5
29 69
P
17
83
3-PF 1/4
20.5 S’F DP1
34 0-Ring port 28
60 117
A 3- 6.4 D
95
78
30.5 43.5
REF 155
1 2 3 4
Dimensions
mm
1 2
Dimensions
mm
150
18
2-
M
10
50 THR
U
24.8°
17.5
31.5
60.5
60.5
2- 11
29
165.5
49
T
134
T
105
25
P
P
Stamping of Model Name
1 2
50 36
100
Location of Ports Name
112
(P, T)
Stamping of Ports Name
(1 , 2)
130
11
2-
1 2
40
4-PF 1/4
O-Ring Seal
Detail -A-
EATON Hydraulic Remote Controls Catalogue E-VLOV-MC002-E4 December 2015 21
HRCP - Type G
Double pedal w/o foot plate
Dimensions
mm
94
19
50 2x2-M10x1.5 DP15
73
12.4° 12.4° 94
60 60
60.5
29
9
32
165.5
+1
27 +0
(P, T)
30
4-PF 1/4 O-ring Port (Detail “A”) Stamping of Ports Name 134±2
Tightening Torque 370±20kgf.cm (1, 2, 3, 4)
4- 11, THRU
40
1 2
94
3 4
25 25
130±0.2
1 2 3 4
Dimensions
mm 78.7 124.8
228
61
90 8 90
87 4.2
.3
10
°
106.4 24.2
42
10°
30
° 12.4
12
° ±0.6 °±0
12.4 .6°
PF 1/4 Gasket Type Port (Detail “A”)
60.5
29
9
Stamping of
Model Name
-P- Port
-T- Port
Serial No.
74
197
(Detail -B-)
136.5
33.5
29
98 54 54
150
PF1/4 Gasket Type Port (Detail -A-) ±0.3
130 24 0 0.2~0.3
Tightening Torque 370±20kgf.cm
50
12 16
PF 1/4
PF 1/4 Port (6EA)
S=2:1
23 5
128
66
62
4- 11THRU
(bar)
B - Proportional without forced terminal rise mm
Output pressure Stroke Available option
Body material NO. A B C D E F G H HRC4 HRC2 HRCP-A HRCP-B HRCP-C HRCP-D HRCP-E HRCP-F HRCP-G
01 5 22 1 5.5 •
Cast Iron 02 5 19.5 1 5.5 •
03 5 20 1 5.5 •
04 5 28 1 6.5 •
05 5 22 1 6.5 •
06 5 22 1 7 •
07 6.5 26 1 7 •
08 3.4 17.2 1 7 •
Aluminum
09 5 19.5 1 7 •
10 9.8 22.5 1 7 •
11 5 28 1 5.5 •
12 6 24 1 8.5 •
13 5 20 0.7 7 •
(bar)
Service Parts
Model
Description
HRC4 HRC2 HRCP-A HRCP-B HRCP-C HRCP-D HRCP-E HRCP-F HRCP-G
Seal Kit JJ004 JJ038 PJ005 PJ011 PJ011 PJ024 PJ005 PJ044 PJ011
Note: For more service parts information, please find in Service literature.