Professional Documents
Culture Documents
Figure 10-31 shows how the size, quantity, pitch, and process for spot welds
are depicted. The size refers to the size of the weld at the junction of the faying
surfaces of the materials being joined. Shear strength, given in pounds or new-
tons, may be used in place of the size dimension. There is no length dimension.
As you saw in Chapter 9, the spot weld symbol may be placed on the arrow
side or other side of the reference line, or it may straddle the line to indicate no
arrow side or other side significance. Projection welds use the same symbol,
size, quantity, and pitch designators, except projection welds should be shown
only as arrow side or other side.
166 Chapter 10