Professional Documents
Culture Documents
Serialization provides
track-ability and immediate
access to on-line
operational instructions
Color-Coded Polymer
Pistol Grip, Valve Handle and Covers Available
offer rugged durability in harsh IMPULSE TM
firefighting conditions Trigger Nozzle
System
(page 8)
Table of 4 8 10 14
Contents
Large Index Ring with Integral Tactile Indicator
Indicator allows easy flow, provides optional preset
pressure or flush selections pattern selection or Choice of:
with a gloved hand factory set lock out • Fixed Metal
• Fixed Molded Rubber
• Spinning Stainless Steel (shown)
Choice of:
• Fixed Pressure and Flow
• Selectable Flow with Fixed
Pressure, or
• Multiple Automatic Pressure
and Variable Flow Choices
• Pulsing Models Available
Choice of:
• Tip Only
• Shutoff
• Shutoff with Grip Models
Flush without
nozzle shutdown or
Lightweight Hard Anodized pattern adjustment
Aluminum Alloy Body includes
permanent laser engraved Bonded Rubber Bumper provides
operational markings and highly maximum durability in
visible reflective labeling harsh conditions For a complete list
of certifications and
approvals, visit
www.tft.com.
15 16 18 19
High Performance Features
Tip Only, Shutoff and Shutoff with Grip Models Stainless Steel cut-away
Slide Valve view
With hundreds of available
models, the G-Force Unique slide style valve
series offers two piece and positive valve
tip only and ball valve position detents in
configurations, as well as all one piece nozzles
one piece nozzles with an provides turbulence-free
integrated slide valve. All stream performance even
models including two piece when gating the nozzle.
ball valve configurations
can be ordered with a color Integral Debris Screen
coded pistol grip and valve handle cover. Inlet screen prevents pattern
destroying debris from entering
Fixed Cut Metal, Molded Rubber, the nozzle and becoming
or Stainless Steel Spinning Teeth lodged. Items that pass through
the screen are easily flushed out
the front of the nozzle.
Flush without
Pattern Adjustment
or Nozzle Shut Off
Nozzles can be easily
and effectively flushed
All models may be ordered with your choice of of unwanted and pattern
diamond cut fixed metal, fixed molded rubber, destroying debris that enters
or stainless steel spinning teeth. All fog teeth are the nozzle without shutting
designed to provide superior pattern performance down or changing pattern
and outstanding firefighter protection without bent, selection during hazardous firefighting conditions.
broken, or missing teeth. The bonded rubber bumper
provides long term rugged dependability even in Reflective Labeling and
the harshest firefighting conditions. Permanent Laser Markings
Reflective clear coated labeling
Rugged Color Coded provides a visually reflective
Valve Handle and image at night or in dark
Pistol Grip conditions. High contrast laser
Ergonomically shaped engraved operational controls are permanently
pistol grip, valve handle marked for a lifetime of rugged service.
and covers made from
super-tough polymer for Index Ring
rugged dependability. Large, easy to grip index
Eleven available colors allow for customization ring provides both visual
for pump discharge hoseline identification, for specific and tactile indication of
fire apparatus, specific stations or department. operational flow, pressure,
or flush choices.
Choose Series Selectable Flow with Fixed Pressure Choose Shaper Control –
All G-Force nozzles are Series “G” Optimal straight stream and fog pattern Tactile Pattern Position
performance are achieved at the selected flow Indicator
and the single rated pressure.
Choose Inlet Fixed Tactile Indicator
Consult factory for other coupling options. Automatic Pressure / Variable Flow Indicates straight stream pattern selection.
Optimal straight stream and fog pattern
Tactile Indicator with Pattern Detent
Choose Style of Valve performance are achieved over the rated flow
range at the rated pressure. Indicator incorporates a detent setting at a
Nozzle with Integral Slide Valve Shutoff defined and set pattern selection. Tactile and
Nozzle with integral slide valve provides Automatic Pressure/Variable Flow audible detent will be set to partial fog pattern,
turbulence-free flow control and five detent with choice of Selectable High / Low or unless specified otherwise.
flow positions. High/ Medium/ Low Flow Ranges
Tactile Indicator with Lock Out
Nozzle with Integral Slide Valve Shutoff Optimal straight stream and fog pattern per-
formance are achieved over the rated flow Indicator incorporates a lock setting that must
and Pistol Grip be manually overridden by the operator to
range at the rated pressure. User determined
Nozzle with integral valve and pistol grip access other stream pattern choices. (Setting
flow limiting selections allow automatic
provides turbulence free flow control and five must be specified when ordered.)
pressure regulation while restricting maximum
detent flow positions.
flow. Locked Tactile Indicator
Nozzle with IMPULSE TM Trigger Operated Indicator is set to a user defined pattern
Automatic Pressure/Variable Flow
Slide Valve Shutoff and Pistol Grip selection and no other pattern choice can be
with Automatic Override
Trigger flow control with pistol grip and made. (Setting must be specified
Optimal straight stream and fog pattern
integrated slide valve provides turbulence free when ordered.)
performance are achieved over the rated flow
flow control and four locking positions.
range at the rated pressure. An automatic
override provides higher volumes at reduced Choose Fog Teeth
Choose Flow and Pressure operational pressures. Some models also Choose from fixed molded rubber, spinning
Fixed Pressure and Flow offer user determined flow limiting selections stainless steel or fixed cut metal.
Optimal straight stream and fog pattern allowing automatic pressure regulation while
performance are achieved at a single rated restricting maximum flow.
flow and single rated pressure.
Example:
A G-Force nozzle (Series G), with a 65 mm BIC Male inlet (Inlet H), styled with valve and pistol grip (Style 3), with a pressure
control selection of automatic 230-570 l/min @ 7 bar (Pressure Control E), with a tactile indicator detent for shaper control
(Shaper Control 2), and fixed molded rubber fog teeth (Fog Teeth F), would yield part number: GH3E2F
6
Ordering Matrix
25 mm (1.0”) One Piece Nozzle Fixed 150 gpm @ 100 psi Fixed Tactile Fixed Molded
G A 2 A 1 F
BSP Female with Slide Valve 570 l/min @ 700 kPa (7 bar) Indicator Rubber
65 mm (2.5”)
R H Automatic 30-95 or 95-150 gpm @ 100 psi
BSP Male
65 mm (2.5”)
S J Automatic 30-70, 70-110, or 110-150 gpm @ 100 psi
Chinese Snap Fit
38 mm (1.5”)
T L Automatic 30-100 or 90-150 gpm @ 75 psi
NPSH Female
Inlet
Debris
Screen
Trigger
Valve Control
• Ergonomic Pistol Grip With Lock
8
EN / Pulsing Nozzles
G-Force Pulsing Nozzles
Offering 14 unique flow and pressure options, all G-Force
pulsing nozzles provide maximum stream velocity
and a consistent water droplet size from the initial
opening of the nozzle throughout the entire rated flow
range. Developed for maximum cooling of fire gases Build Your Pulsing G-Force Nozzle
and minimal disruption of the thermal balance in three From the chart below, select the series, inlet, style,
dimensional fire environments, G-Force high performance pressure control, shaper control and fog teeth from
pulsing nozzles have been produced to provide rugged
each column to configure your nozzle and yield a part number.
durability in the harshest of firefighting operations.
38 mm (1.5”)
F E Automatic EN 400 l/min @ 6 bar
NH Female
65 mm (2.5”)
Q J Automatic EN / Pulsing 250/500 l/min @ 6 bar
BSP Female
65 mm (2.5”)
R L Automatic EN / Pulsing 150/250 l/min @ 6 bar
BSP Male
65 mm (2.5”)
S N Automatic EN / Pulsing 235/400 l/min @ 6 bar
Chinese Snap Fit
*Articulated couplings V
Automatic EN / Pulsing 150 l/min @ 6 bar
are subject to Automatic Override
additional cost.
Consult factory
There are additional models in this series, not listed here,
for other coupling
that have international certifications and approvals.
options.
Please refer to www.tft.com for additional information.
Tip Only
The Tip-Only Model
is an ideal choice for an addition to any
ball valve shut off. Integrating your choice FlipTip with Integrated Ball Shutoff
®
10
FlipTip with Integrated
®
FTGF34F1F
Pivot Lock
Mechanism
Rear Tip Orifice Choice
The FlipTip can be quickly
The rear component of the FlipTip
and securely changed from
is available in 6 different orifice sizes
small tip to large tip during
and provides water flows starting at
firefighting operations
570 l/min (150 gpm). All uniquely
using a positive twist lock
tapered tip inserts are designed to offer
mechanism that prevents
high performance water or compressed
unintentional movement.
air foam streams, and are held securely
The locking ring is easily
in place during rugged initial attack
rotated with a wet or foamy
operations.
gloved hand.
Example:
A FlipTip nozzle (Series FTG), with a 38 mm BSP Female FlipTip Tip Only or with Integrated Ball Shutoff
inlet (Inlet B), styled with valve and pistol grip (Style 3),
with a 25 mm rear tip (Rear Tip 5), pressure control selection
Series Inlet Style Rear Tip Front Tip
of automatic 230-570 l/min @ 5 bar (Pressure Control F),
38 mm (1.5”) 22 mm 13 mm
with a fixed tactile indicator (Shaper Control 1), and FTT F 1 Tip Only 3 1
NH Female (7/8”) (1/2”)
spinning stainless steel fog teeth (Fog Teeth S), 38 mm (1.5”) 24 mm 16 mm
T 2 Valve 4 2
NPSH Female (15/16”) (5/8”)
would yield part number: FTGB35F1S
65 mm (2.5”) Valve and 25 mm 24 mm
J 3 5 4
NH Female Pistol Grip (1.0”) (15/16”)
29 mm 25 mm
6 5
(1 1/8”) (1”)
32 mm
7
(1 1/4”)
35 mm
8
(1 3/8”)
12
Model Ordering Matrix
FlipTip with Integrated Ball Shutoff and G-Force Nozzle
Series Inlet Style Rear Tip Pressure Control Shaper Control Fog Teeth
25 mm (1.0”) One Piece Nozzle 22 mm Fixed 150 gpm @ 100 psi Fixed Tactile Fixed Molded
FTG A 2 3 A 1 F
BSP Female with Valve (7/8”) 570 l/min @ 700 kPa (7 bar) Indicator Rubber
65 mm (2.5”)
R H Automatic 30-95 or 95-150 gpm @ 100 psi
BSP Male
65 mm (2.5”)
S Chinese J Automatic 30-70, 70-110, or 110-150 gpm @ 100 psi
Snap Fit
38 mm (1.5”)
T L Automatic 30-100 or 90-150 gpm @ 75 psi
NPSH Female
38 mm
U M Automatic 30-80, 60-110, or 110-150 gpm @ 75 psi
Storz