LESS pana
February 8, 1980 SL590-77-2
Revised September 30, 1980 Revision 1
ENGINE WASHING PRECAUTIONS
TACH GENERATOR PROTECTIVE COVER
Special precautions should be taken during engine washing on
CITATION II aircraft equipped with tach generators, P/N 22554 or
22R623, manufactured by Glove Manufacturing Incorporated. This tach
generator is identified by the three holes in the top housing cover.
Reports have been received that engine wash solution can enter and
become trapped in the tach generator housing. This can result in
corrosion or bearing lubricant wast) out and eventual tach generator
failure.
Operators of aircraft equipyed with Globe tach genérators should
order one snap-on protective cover, P/N 540841, for eacn generator.
Tnese protective covers are available through normal CITATION parts
distribution channels.
These covers should ove installed on top of the tach generator
housing. This protection will improve bearing service life and
consequently the life of the Globe tach generator.
The Cessna Aircraft Company / Commercial Jet Marketing Division / Post Office Box 7706 / Wichita, Kansas 67277
SEMMICE) srrer