This book is intended as a source of technology and data for,
the electrical design of EHV and UHY transmission lines up to,
1600 kV. Much of the information was developed at Project
UHV over the past twenty years, Four major design areas are
treated: insulation design, corona performance, electric and,
magnetic fields, and circuit performance including conductor,
‘characteristics. In each area, a common set of base-case clr
cuit designsis analyzed to help the design engineer understand,
‘and become sensitive to the lems atfecting design. Means 10,
‘measure each discipline ae fully explored.
Insulation design for switching surge, lightning, and contami-
nation is treated in depth. Stress versus strength arguments,
together with strength data forall practical design situations,
are featured for switching-surge design. A step-by-step analy-
sis procedure for lightning insulation suitable for hand-held cal=
Cculator use is an innovation in this book. For contamination,
specific recommendations are made for insulator configura-
tions from 345 to 1100 KV.
The topics for corona performance are radio noise, audible
‘noise, and corona loss. Design charts and equations as wel as
their underlying technology are developed in each of these
areas for both single and double circuits. Special consideration
to the concepts of generation, transmission, and detection is,
given for each parameter. Eleciic fields at ground level are
treated in detail to support the goals of obtaining maximum
field values and understanding the effects of electric fields on
objects in the ROW. Mitigation means, calculation techniques,
and effects of magnetic fields are alzo included. For conve
rience, tables of conductor and bundle phase characteristics,
‘along with electric and magnetic transmission line parameters,
are presented for EHV and UHV base cases,