Professional Documents
Culture Documents
ICPS User Guide Renault K9K Gen8 C Sample
ICPS User Guide Renault K9K Gen8 C Sample
Confidential Page 1 of 8
© Continental AG
BU S&A
Table of contents
1 VERSION HISTORY .......................................................................................................................... 3
2 INTRODUCTION ................................................................................................................................ 3
2.1 DOCUMENT PURPOSE ........................................................................................................................ 3
3 DELIVERED SENSORS INFORMATION ...................................................................................... 3
4 INSTRUCTIONS.................................................................................................................................. 4
4.1 SENSOR OVERVIEW .......................................................................................................................... 4
4.2 WIRING & GROUND CONNECTION .................................................................................................... 4
4.3 TYPICAL POWER SUPPLY VOLTAGE(VS) .......................................................................................... 5
4.4 CURRENT CONSUMPTION .................................................................................................................. 5
4.5 MOUNTING INSTRUCTIONS ............................................................................................................... 5
4.6 SPECIFIC MOUNTING TOOL: ............................................................................................................... 6
4.7 RECOMMENDED APPLICATION CIRCUIT ............................................................................................. 8
4.8 ACQUISITION EXAMPLE..................................................................................................................... 8
Confidential Page 2 of 8
© Continental AG
BU S&A
1 Version History
2 Introduction
2.1 Document purpose
The purpose of this document is to provide the information needed for testing Continental
In-Cylinder Pressure Sensor (ICPS) on Renault K9K Gen8 engine.
Confidential Page 3 of 8
© Continental AG
BU S&A
4 Instructions
4.1 Sensor Overview
Coaxial 3 ways
12 Hexagon connector
Confidential Page 4 of 8
© Continental AG
BU S&A
Cylinder head interface thread and taper seal have to be clean (no oil and dust) and respect
standard 34 - 07 – 025/--H with level A (G-H9/I-X5)
Before screwing the sensor, sensor and engine must be at room temperature.
Specific Coating Dow Corning D96 is applied on thread.
Thread
Coated area
Mounting recommendations:
Ambient Sensor on Ambient engine (20°C)
Case 1 : New coated sensor mounted on new cylinder head, estimated torque: 6.8 N.m
Case 2 : Coated sensor previously mounted once on cylinder head used previously with coated sensor,
estimated torque : 7.6 N.m
Warning: sensor free fall is not guaranteed. Don’t use sensor after free fall.
Confidential Page 5 of 8
© Continental AG
BU S&A
Confidential Page 6 of 8
© Continental AG
BU S&A
LClamp 5%Vs
HClamp 95%Vs
LDiag 3%Vs
HDiag 97%Vs
Confidential Page 7 of 8
© Continental AG
BU S&A
°CRK
Confidential Page 8 of 8
© Continental AG