Professional Documents
Culture Documents
Defoamers
Architectural Coatings 3
Industrial Coatings 4
Wood Coatings 5
Adhesives 6
Printing Industry 7
Grinding Pigments 8
Pigment Dispersants 11
Rheology Modifiers 12
10
1
AGITAN® and DEE FO®
• Broad range of chemistries
Our defoamers are industry standards for reducing the problems associated with
foam formation in the production and application of water-based systems, including:
Architectural Coatings
Adhesives
Industrial Coatings
Printing Industry
Wood Coatings
Grinding Pigments
Defoamers are formulated to have controlled incompatibility in coatings, inks and adhesives.
This controlled incompatibility impacts the defoamer droplet size during initial dispersal and
the stability of those droplets during subsequent manufacturing, packaging and application steps.
Optimal defoamer selection requires an understanding of these steps to ensure that the defoamer
has the appropriate ease of incorporation and persistence to shear.
After initial dispersal, as the system is being packaged and applied, intense shearing or excessive
compatibility can further reduce the droplet size, eventually rendering them too small to be effective.
In the product matrices that follow, each defoamer is also described by its persistence to shear
in terms of high (H), medium (M) or low (L).
2
Architectural Coatings
AGITAN® 282
AGITAN® 350
AGITAN® 760
DEE FO® 215
AGITAN® 786
Defoamer Type M, M M M M M M, POA 3D, 3D, 3D, OMS, OMS
E POA OMS OMS OMS POA
WA, WA WA, MS WA HS WA, WA, HS HS HS HS
Defoamer Solids HS HS HS HS
Emulsion Paints
(matte / satin / eggshell)
Emulsion Paints
(high gloss)
Traffic Paint
Ease of Incorporation L L L M H H L L M M M L M
Persistence to Shear M M M M M M H H H H M H M
Legend for Defoamer Type and Solids: E: Aqueous Emulsion; M: Mineral Oil; WO: White Oil; POA: Polyoxalkylene Technology;
3D: 3-Dimensional Polysiloxane; OMS: Organo-Modified Siloxane; WA: Wax; HS: Hydrophobic Silica; MS: Metallic Stearate
3
Industrial Coatings
AGITAN® 350
AGITAN® 299
AGITAN® 760
AGITAN® 761
DEE FO® 215
Agitan® 786
M M M POA POA 3D, 3D, 3D, OMS OMS, OMS OMS
Defoamer
Type
OMS OMS OMS POA
WA WA, HS WA, HS HS HS HS HS
Defoamer Solids
HS HS
Metal Primers
Anti-Corrosion Coatings
Water-Based Alkyds
Water-Based UV Coatings
Automotive Fillers
Automotive Basecoats
Automotive Clearcoats
Ease of Incorporation H M H L H M M M H L L M
Persistence to Shear M M M H L H H M M H H M
Legend for Defoamer Type and Solids: E: Aqueous Emulsion; M: Mineral Oil; WO: White Oil; POA: Polyoxalkylene Technology;
3D: 3-Dimensional (3D) Siloxane; OMS: Organo-Modified Siloxane; WA: Wax; HS: Hydrophobic Silica; MS: Metallic Stearate
4
Wood Coatings
AGITAN® 282
AGITAN® 351
AGITAN® 760
AGITAN® 761
DEE FO® 718
AGITAN® 786
Defoamer Type M M M M POA 3D, 3D, 3D, OMS OMS, OMS OMS
OMS OMS OMS POA
Defoamer Solids WA HS WA, MS WA, HS HS HS HS HS
HS HS
High-Gloss Enamels
2K Polyurethane Coatings
Water-Based UV Coatings
Ease of Incorporation H H M M M M H M H L L M
Persistence to Shear M M M M M H H M M H H M
Legend for Defoamer Type and Solids: E: Aqueous Emulsion; M: Mineral Oil; WO: White Oil; POA: Polyoxalkylene Technology;
3D: 3-Dimensional Polysiloxane; OMS: Organo-Modified Siloxane; WA: Wax; HS: Hydrophobic Silica; MS: Metallic Stearate
5
Adhesives
AGITAN® 351
AGITAN® 299
AGITAN® 785
DEE FO® 215
Envelope / Label
Packaging
Wood Glue
Construction
Polyvinyl Alcohol
High Viscosity
Ease of Incorporation H M M H H M H L M H H M
Persistence to Shear M M M M M M M H H L M H
FDA 175.105
FDA 176.210
Legend for Defoamer Type and Solids: E: Aqueous Emulsion; M: Mineral Oil; WO: White Oil; POA: Polyoxalkylene Technology;
3D: 3-Dimensional Polysiloxane; OMS: Organo-Modified Siloxane; WA: Wax; HS: Hydrophobic Silica; MS: Metallic Stearate 6
Printing Industry
AGITAN® 299
AGITAN® 155
AGITAN® 786
AGITAN® 760
AGITAN® 761
Defoamer Type M WO M M, M,E POA POA POA 3D, 3D, 3D, 3D, OMS, OMS OMS, OMS
POA OMS OMS OMS OMS E POA
Defoamer Solids WA WA WA, WA, WA, WA, HS HS HS HS HS HS HS
HS HS HS HS
Corrugated Paper
Coated Paper
Film & Foil
Overprint Varnish
Metallic Ink
Ink Jet
Screen Ink
Fountain Solution
Press-Side
Ease of Incorporation H H M H H M M H M M M L H M L L
Persistence to Shear M M M M L H H L H H M H M M H H
FDA 175.105
FDA 175.300 * *
FDA 176.170 * *
FDA 176.180 * *
7 3D: 3-Dimensional Polysiloxane; OMS: Organo-Modified Siloxane; WA: Wax; HS: Hydrophobic Silica; MS: Metallic Stearate; *: Limited 7
Grinding Pigments
AGITAN® 350
AGITAN® 351
AGITAN® 786
Carbazole Violet
Organic Red / Yellow
(e.g. PR 22, PR 57:1, PY 14…)
Titanium Dioxide
Ease of Incorporation H M L L L L L L M L M
Persistence to Shear H M H M H H H H H H H
Legend for Defoamer Type and Solids: E: Aqueous Emulsion; M: Mineral Oil; WO: White Oil; POA: Polyoxalkylene Technology;
3D: 3-Dimensional Polysiloxane; OMS: Organo-Modified Siloxane; WA: Wax; HS: Hydrophobic Silica; MS: Metallic Stearate
8
Wetting and Leveling Agents:
METOLAT®
Control surface tension
Improve substrate and pigment wetting
Wide range of products to tailor compatibility and foam tendency
EDAPLAN LA®
Improve film leveling and overall film quality
Pigment Dispersants:
METOLAT® and EDAPLAN®
Polymeric dispersants for a wide variety of pigments and fillers
Prevent pigment sedimentation and flocculation
Improve color strength
Stabilize viscosity
Rheology Modifiers:
TAFIGEL®
HUER associative thickeners
Range of products provide Newtonian or pseudoplastic behavior
Tailor product selection to optimize sag, leveling, spatter, sedimentation, flow
METOLAT®
Powder additives to reduce shrinkage during drying and curing of cementitious systems
Powder additives to improve dispersion of particles and fibers in cementitious systems
9
Wetting and Leveling
Agents
EDAPLAN® LA 411
EDAPLAN® LA 403
EDAPLAN® LA 413
METOLAT® 7010
METOLAT® 285
METOLAT® 388
METOLAT® 700
METOLAT® 725
METOLAT® 750
METOLAT® 775
METOLAT® 780
METOLAT® 288
Substrate Wetting
Inks
Adhesives
Overprint Varnishes
Low Foaming
Legend for Wetting Agent Type: ES: Anionic Ester; NC: Nonionic Compounds; OMS: Organo-Modified Siloxane; AC: Anionic Acrylic Copolymer
10
Pigment Dispersants
METOLAT® 514
EDAPLAN® 395
EDAPLAN® 470
EDAPLAN® 480
EDAPLAN® 482
EDAPLAN® 490
METOLAT® 390
Metolat® 392
EDAPLAN®472
EDAPLAN® 516
Fatty Olefinic Olefinic High MW High MW High MW High MW High MW High MW High MW High MW
Derivative Polymer Polymer Acrylic- Copolymer Acrylic- Acrylic- Acrylic- Acrylic- Copolymer
Acrylic-
Chemistry of Active
Copolymer Based Based Based Based Based Based
Copolymer Polymer Polymer Polymer Polymer Polymer
% Active 55% 45% 55% 34% 30% 50% 50% 85% 85% 40% 20%
Solvent Water Water Water Water Water BDG BDG Water Water Water Water
Inorganic Pigments
Organic Pigments
Carbon Blacks
Fillers
Typical Dosage
Organic Pigment 40 – 100% 30 - 100% 10 - 60% --- 10 - 60% 10 - 60% 10 - 60% 10 - 60% 10 - 60% 10 - 60% ---
Typical Dosage
Inorganic Pigment --- --- 0.5 - 20% 0.1 - 1.0% 0.5 - 20% 0.5 - 20% 0.5 - 20% 0.5 - 20% 0.5 - 20% 0.5 - 20% 0.1 - 10%
= Primary Recommendation = Secondary Recommendation
All products are APE free and recommended for water-based systems.
All products are anionic with the exception of EDAPLAN 490 which is nonionic.
11
10
Rheology Modifiers
TAFIGEL® PUR 41
TAFIGEL® PUR 45
TAFIGEL® PUR 50
TAFIGEL® PUR 55
TAFIGEL® PUR 60
TAFIGEL® PUR 61
TAFIGEL® PUR 65
TAFIGEL® PUR 80
TAFIGEL® PUR 85
Rheology Profile P P N P N SP SP SP N N
Active Content 40% 20% 40% 21% 20% 40% 25% 20% 20% 25%
Decorative Coatings
Industrial Coatings
Emulsion Paints
Printing Inks
Adhesives
Spray Applications
Sag Resistance
12
Additives for
Building and Construction
METOLAT® P 872
METOLAT® P 873
METOLAT® P 588
METOLAT® P 854
AGITAN® P 8850
AGITAN® P 801
AGITAN® P 803
AGITAN® P 823
AGITAN® P 841
Chemistry MPOA
MPOA MPOA POA POA DC AA AA MFD AA
Type of Additive Powder Defoamer Powder Anti-Shrink Powder Dispersant
Self-Leveling
Recommendation
Recommendation
Recommendation
Recommendation
Recommendation
Thin Sets
for All Systems
for Pigmented
for Systems
with Fibers
Systems
Primary
Primary
Primary
Primary
Primary
Stiff Products
Legend for Product Chemistry: MPOA: Mineral Oil / Polyoxyalkylene Technology; POA: Polyoxyalkylene Technology;
DC: Diol Compound; AA: Alkylalkoxylate Technology; MFD: Modified Fatty Derivative
13
10
Contact
MÜNZING North America MÜNZING Chemie GmbH MÜNZING Shanghai Co.Ltd.
1455 Broad Street, Suite #3 Salzstrasse 174 Room 404-408, Building 12
Bloomfield 74076 Heilbronn No. 128 Xiangyin Rd.
NJ 07003-3003 GERMANY USST National Science Park
USA Phone +49 7131 987-0 Shanghai 200433
Phone +1 973 279-1306 Fax +49 7131 987-125 P.R. China
Toll Free +1 800 524-0055 E-Mail info@munzing.com Phone +86 21 6149 1561
Fax +1 973 338-0420 Fax +86 21 6149 1563
E-Mail info@munzing.us E-Mail info@munzing.cn
MUE_2013_009_US –08/14