Professional Documents
Culture Documents
Summary
This example shows how to configure transparent wireless bridge in GUI from one W60G device to another.
After configuration reset - only mac-telnet is possible. In main WinBox screen press on Neighbours, choose your devices MAC address and press Connect:
Configure bridge
Add new bridge and assign bridge members to it. This will allow to pass traffic from from Ethernet to W60G interface without routing.
All previously explained steps are identical to bridge and station devices. Different modes needs to be used when configuring wireless interfaces.
Link should be established after all previously explained steps are done. It's recommended to set up administrator password on both devices.
To create point to multi-point setup: On bridge device ap-bridge must be set and station-bridge for stations.