TASK84
Vectorial drive for step motors
Drive of compact positioner for step motor with encoder
Control and orientation of field as brushless motor with
rotor flux retroaction position.
This avoids typical disadvantages with step motors, €.9.
high heat dissipation with motor stopped, resonance
phenomena and step loss, difficulty in torque control.
FEATURES:
= Assembly on DIN guide with minimum of space and
minimum heat dissipation.
= DSP+MosFET technology.
= Closed loop vector control with encoder.
~ Power supply: DC 48V - Max current 124 per phase.
- CAN field bus.
= Co-ordination in electric axis via CAN line,
= 2 digital inputs per limit switch,
= Incorporated fibre optic limit switch for hazardous-area
applications.
APPLICATIONS:
Distributed control on motors with drastic reduction in
cabling. Co-ordination of several motors in electric axis.TASK84
DiGIMOT
D.C. motor drives
ACIDC digital converter for motors of up to 480V/1654,
FEATURES:
= Speed regulation with incremental encoder feedback,
‘tachometer dynamo or armature feedback.
= Position regulation for applications with dancer or load celis
- Speed or torque generating reference circuits,
= MatoPotentiometer for the generation of variable
references.
- Negative block.
= Operation and stop logic with direct control of the power
contactor in the START-STOP and in the JOG stages.
= Serial interface RS422/485.
- Internal console for setting and monitoring parameters.
- Self-calibration of the armature and field current regulator.
TYPICAL APPLICATIONS:
Motorizing of printing machinery.TASK84
‘SYNCHRO PRO
Complete standard unwinder/rewinder control with
pushbutton consele control end remote 1/0s on profibus
interface
or
The SYNCHRO-PRO digital regulator is the development of the
SYNCHRO system as with a single product it is possible to
cover the entire range of performances required on a printing
machine of the rotogravure and flexographic type or laminator.
The high degree of flexibility means it is possible to cantrol
rewinders, both motorized and braking unwinders reels, as
well as the machine's line speed. It is equipped with serial
interface RS485 and Profibus L2-DP through which itis
possible to access the system resources. The system includes
up to 60 24-Volt digital remote 1/0 an Profibus.
The operator panel is equipped with an alphanumerical display
on 4 lines and 30 pushbuttons and LEDs with programmable
functions accessed as remote control via the Profibus line.TASK84
Digital control for step motors
Digiflex is a digital control system for 6 step motors with
encoder. This innovative closed loop control scheme based on a
reading of the rotor position by means of an encoder means it
is possible to reach extremely high speed without step loss.
‘The PROFIBUS L2-DP interface enables movement commands to
be sent to the 6 motors and to acquire information on the state
of the system in real time. Typical application is for control of
positioning motors of CPC and ANILOX axes and motors for
longitudinal and transversal register of a deck of a flexographic
type printing machine. Thanks to the hand-held external
intrinsically-safe console UL approved it is possible to control
each of the 6 motors. An internal console with display and
serial line RS485 the equipment ensures ease of access to the
system's resources during the programming stage.