Professional Documents
Culture Documents
The main function of the Rugged EDA Cradle is to power and charge your EDA while your on the move, and hold it securely
into position under heavy use.
Features
e4 Certified
Certified to be used in cars and trucks.
Specifications
Cradle
Input voltage : 12 to 24 Volt
Output voltage : 5 Volt
Output current : Max. 2,5A
Material : ABS
Dimensions ( b x h x d ) : 105 x 128 x 50 mm
Connections : Cigarettelighter adaptor
Description
Safe charging
Integrated in the holder is an efficient charging circuit,suitable for 12V and 24V, which powers and
www.carcomm.eu/~popups/productPrintPopup.cfm?productId=59964CE4-5056-A300-DEBA891C26BCF0D5 1/3
19/8/2020 CMPC-1400 Rugged EDA Charging Cradle - Point Mobile PM80
charges your EDA. The chargeris specially developed for professional use where reliability andquality are
very important. The charger keeps your device charged andready for use in- and outside your vehicle.
Protection
The cradle is developed to ensure that the EDA is kept in place but isstill easy to remove. This is achieved
with special fixtures that keepthe EDA firmly seated on the cradle connector while driving on
bumpyroads. This also protects the EDA connector and cradle connector frombeing damaged.
Installation
Contents
Accessories
There are different kind of accessories available for the Mobile PDA & Smartphone Cradles. Here you can find a small
selection.
www.carcomm.eu/~popups/productPrintPopup.cfm?productId=59964CE4-5056-A300-DEBA891C26BCF0D5 2/3
19/8/2020 CMPC-1400 Rugged EDA Charging Cradle - Point Mobile PM80
Gooseneck Mount
This heavy-duty mount is a very solid and robust mount. The mount
is adjustable in almost every angle imaginable so that there is
always an optimal view on the EDA or PDA.
More information..
Dashmounts
If you want to mount your cradle in you car a Dashmount is a choise.
This metal mount is mostly installed between the car-stereo and
dashboard. This results in the cradle and phone always being in
reach and in sight.
More information..
Safety-Mounts
If you don't want to make use of the cradle's included window-mount
you could make use of a Safety-Mount. This plastic mount is easily
installed in your vehicle, usually where the air-vents are where you
simply click it between the vent and dashboard. There are also
versions available where it is installed on the center-console.
More information..
More information..
GPS Receiver
If your PDA does not have a built-in GPS receiver, the Carcomm
GPS receiver adds the ability to navigate on your PDA if it the cradle
and device supports it.
More information..
www.carcomm.eu/~popups/productPrintPopup.cfm?productId=59964CE4-5056-A300-DEBA891C26BCF0D5 3/3