DIRECTV DIRECTV ENGINEERING PRODUCT
QUALIFICATION AND APPROVAL LETTER
04/13/2011
DIRECTV is pleased to report that Thomas & Betts, SNS1P6U connector, has been
approved for production,
Production SNS1P6U, connectors shall be of the same design, made identically and to the
same specifications as the samples we have reviewed and evaluated. No design changes, in
any Way, are permitted without first notifying DIRECTV. Attached to the notification shall be
reasons for requesting the change and the degree of testing performed to verify the correction
of a problem and/or the improvement of a performance parameter. DIRECTV shall do its due
diligence to expedite the change process.
Unauthorized modification of an approved product and/or failure to notify DIRECTV of any
changes may invite a disqualification of the said product and the supplier.
Please note that DIRECTV continues testing your product. If any issues are discovered,
DIRECTV will require these issues be addressed to DIRECTV's satisfaction. If the issues are
deemed severe enough by DIRECTV and are not resolved, resolution could involve stopping
production or product recall, at the supplier's expense.
Version Description
Manufacturer ‘Thomas & Botts Approvals Date
SNS1P6U
Model Number X_ Performance 04/2011
- Connector: . :
Approved by
heh
a
2230 E. Imperial Hwy. EI Segundo, CA 90245
‘Telephone (310) 535-5098 + Fax (310) 535-5323