Professional Documents
Culture Documents
06 March 2018
Many customers contact us with queries on loading conditions and use of specified
forces in Sima. In most cases, they need to be explained from HydroD, not just
Sima. In the document, an example problem is given and a consistent setting for
loading conditions and specified force is described.
Problem: A load of 50 tons will be loaded on the stern part of a barge of 100 tons.
The barge at unloading condition and the load are shown below:
– The barge: 100 ton
– Load: 50 ton
Loading condition
– The same as the target loading condition
Mass matrix
– Includes the load as well as the barge
– Total mass is 150 tons
Barge
– Created by importing the Wadam results
– Mass is 150 tons
– Initial loading is the same as that defined in HydroD
Load
– Should be modelled as another body of 50 tons
Loaded model
– The imported barge is 150 tons and initially trimmed. 50 t
www.dnvgl.com
The trademarks DNV GL®, the Horizon Graphic and Det Norske Veritas®
SAFER, SMARTER, GREENER are the properties of companies in the Det Norske Veritas group. All rights reserved