Professional Documents
Culture Documents
PL06-01-030-B
B B
PL06-01-028-D
PL06-01-029-A
BROAD FACE STAIRS
PL06-01-027-A
ADHESIVE*
PL06-01-223
PL06-01-265
3 PLACES Oil City Division
671 COLBERT AVENUE
OIL CITY
PENNSYLVANIA 16301
* GROUT, WITH CHEMICALLY RESISTANT GROUT The information contained in this document, including but not limited to all dimensions and tolerances,
represents the design engineering and other proprietary information of SMS Millcraft. This instrument is
AROUND EACH ANCHOR SO THAT PLATFORMS supplied solely to enable the purchaser to perform routine maintenance of the equipment supplied by
PL06-01-264 SMS Millcraft and the acceptance hereof constitutes the understanding that the purchaser will strictly
ARE PARALLEL WITH BROAD FACE STATIONS. adhere to the obligation of this instrument and the information herein:
PL06-01-288 BROAD FACE BOX PLATING STAND PLATFORM ASSEMBLY 1. This document will not be reproduced for any reason without this notice appearing theron in full.
USE PL06-02-031-E AS SPACER FOR GROUTING 2. Any information herein will not be disclosed to any third party without prior written approval.
D 4 PLACES 3. Any information herein will not be employed to fabricate or maintain any item the design of which
D
PURPOSES AS NEEDED. is shown herein except for use for maintenance of or as a replacement part for the purchaser's
SMS Millcraft supplied equipment.
GRATING NOT SHOWN FOR CLARITY 4. The capability to reverse engineer from the SMS Millcraft supplied equipment, if available, shall not
act as an exception hereto.
5. Recipients of any confidential information contained in this document are advised that any unauthorized
PL06-01-222 ATTACH BF STATION #1 AND #2 PLATFORMS ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE SPECIFIED dissemination of such information is punishable by civil and criminal penalties.
PLATING SYSTEM
1 PLACE TOLERANCES ARE NOT ACCUMULATIVE
PL06-01-223, PL06-01-264, PL06-01-265, BROAD FACE BOX PLATING STAND PLATFORM ASSEMBLY
FABRICATION TOLERANCES MACHINING TOLERANCES
& PL06-01-288 BELOW 450 BELOW 450 ±0.25 SCALE 1:16 PLOT DATE FILE NAME : JOB No
REV. DESCRIPTION DATE BY CH'K. UNIFIED CLASS 2A/2B THREADS BREAK ALL SHARP CORNERS APPROVED DATE
PL06-02-003 0
1 2 3 4 5 6