Professional Documents
Culture Documents
2.2. Connection of Serial Communication Cable
2.2. Connection of Serial Communication Cable
Power cable
Sensor
I/O cable terminal block
(2) Connect the signal line that has been disconnected from the I/O unit to the male connector
connected to the relay.
Relay terminal
Mark tube AMP connector CFM side
block No.
IN7 Male 9 IN7
IN8 Male 10 IN8
(3) Connect the female connector that is connected to the relay to the I/O unit (02h) inside the AC90
control panel.
Relay terminal
Mark tube AMP connector CFM side
block No.
IN7 Female 13 IN7
IN8 Female 14 IN8