You are on page 1of 1
16.1-16 MEMBER PROPERTIES Sect. BA, TABLE B4.1a Width-to-Thickness Ratios: Compression Elements Members Subject to Axial Compression Limiting 3 Width-to- | Wieth-to-Thickness &| description ot | Thickness] Ratio 4, Element Ratio _|(nonslender/stender) Examples Flanges of rolled I-shaped sections, plates projecting {tom rolled shaped sections; outstanding fe logs of pairs of ont 06 |= ‘angles connected VG with continuous ‘contact, langes of channels, and flanges of toes 2 | Flanges of bult-up I-shaped sections and plates or angle bt legs projecting from bull-up shaped sections Unatiffened Elements 3 | Legs of single angles, legs of

You might also like