JJ ELECTRONIC
Excellence with Every Decibel1 828 integrated power tube stereo ompitier
Circuit type: Push-Pull Ultra Linear AB with
Power output: 70 W RMS each channel
Loadimpedance: 4:8 Ohm
Input sensitivity: 0,775 V for full output
Inpulimpedance: 25 000 Ohms
Power bandwidth: 20 Hz - 25.000 Hz (-1 48)
Noise & hum 88 dB bellow full output
Inputs: 5 xline (unbalanced)
Tape out: For tape recorcing
AC power: 230 V (120 V, 100V) AC 50/40 He
Consumption: 400 W max.
Tubes: 8 x JJ X188, 2 x J) ECCI,
4x J) BCC82
Dimensions: 480 x 350x 180 mm.
Weight: 35g
Finish chasis: black, gold ontique or
siver antique (puiver lack)
top plate: gold or siver (puiver
lack)
Cover: gold or siver (pulver lack)
wood: brown, natural (glossy) or
black {dul}
‘The baste design criteria for amplifier Js 828.
were aa fellows
Integrated amplifier wit remote contol
ranimum SOW output power per enenne
Suffeient camping factor minal global
feedback
seat sound
1.05 mm. The ar stance provides inearization
of ecerial parameters win the enlre power
range, The manufacturing of C-ore, snl a8
In the case of tho JJ 322 ample, is under
complete contol ofl Electronic. There are two
(OT cols: sach has four primary, four bier
secondary and two foodback windings. Tis OT
‘Our designers have chosen this solution:
high quay components
inputs switched by signal ays
independent power sourco for each channo
ta near cicuey with KT 88 tube
high operational cont of KT 8 (75mA)
788 ‘cathodes feedback (CFB) via output
transformers
utp transformer unique design
Forthe frst timo, ube ECC 99 used asa crver
for KT 88, This 8 tube specifcaty developed
by JJ Electronics for appleaton as a unique
linear aver for high power toes KTS and 300
B.Concerina wth ECC 82 parallel was chosen
as 8 phase nverar in ont ofthe ECC 99.
‘There ae wo feedbacks nhs design: one is 2
gjobalfeesback fom OT (-8d8) and tho second
ie rom the KT8@ cathodes through OT (6d). AVMLABLE STORES AROUNO THE
Ouipst transformer is based on C-core made sim
from 033-015 mm shoots, wth a distance 2x Snack