Twin trimmer
VF
series
Fiber sensor
C€ Rohs
by Twin trimmer
High speed response time :
ON<0.2ms / OFF <0.25ms
Dark ON / Light ON is changea
Protection circuit :
Short circuit & Polarity reversed p
Easy to set optimal detection condition
B
ble
rotection
@ Specification / BUS
Lead wire t wire M8 connector type
ue ey et reat wie Has
Model DR VF-06R, VF-06RP VF-06R-M8 VF-06RP-M8
Output method — #iLH Zt NPN PNP NPN PNP
Emitter BAAR Red LED
Operating voltage L/F@ ME 10 ~ 30VDC
Power ripple Shee 20% peak to peak
Currentconsumption #£ 887 40mA max.
Sensing distance #2) 26 RE Over 85 mm with FPR-51
Hysteresis = 10% of sensing distance max.
Responsetime m2i9H ON<0.2ms ; OFF<0.25ms.
Trimmer Bee Emitter : Coarse adjuster ; Sens. : fine adjuster
Output status LHR AE NO/NC changeable
Output current = ti Bit 150mA max.
Residual voltage RSE 0.1V max.
Leakage current ie it 0.8mA max.
Protection circuit (Rie Short circuit & polarity reversed protection
Hoiising meteral R058 ffarsveAss
Operating circumstance —C (EIR -25(C ~+80°C 1 35% ~ 85% RH
Protection class (Ri8R IP-65,SAen
seg woass C€ Rohs VE,
@ Dimension / RS fal
VF-O0 VF-OO-M8
bortt
sabe
@ Output circuit & Connection diagram / Hi tH FIRE
PNP Output status
iW toe Sens. Adjuster fine adjuster : To adjust the sensitivity
2> Emitter adjuster : Coarse adjuster : To adjuster the strength of emitter (Normally, to be set to Max.)
21> [Reflex type in background condition)
Let the Top, pilot LED turn ON from OFF status without target by adjusting the Emitter
adjuster] , then, Let the Top! pilot LED turn OFF by adjusting the "Sens. Adjuster
2-2> Through beam type to detect small object
Let the Top, pilot LED turn ON from OFF status without target by adjusting the Emitter
adjuster] , then, Let the Top! pilot LED turn ON from OFF status by adjusting the
Sens. Adjuster!
1 > RISA NEAR : HN: IRIE
2> SYS BNE AS = ERE : — AR BOR ONG ANISM”
21> TRS AU RPS MDS | Fe 92 eS Min“ 9 HE BE NB"ON
BM NRE) SHEFF”
22> CSB BIRNEY | FHS 91 BS" min HG OB BE RB"ON
ER (BKRREMSS) SHE OF EME ON ERA °