‘Machine Modes Service Manual
Figure 3-3 Location of Flash Card in Logie Cage
o
° 9
wi
‘co0s12 oe
1. Take the SETCHIP flash card, insert it into the flash card slot in the logic cage
{as shown above) and restart the Game, Th2 following message is displayed.
2. Set the Game and Panel Type by pressing the [Cashout / Take Win] key to
toggle game and key panel type — the seiting will display on the screen
GAME and KEY PANEL TYPE; Reel Power Game (25),Service Manual
Machine Modes
3, Press the [Service] and [Bet 5 Credits] buttons (playbutton names vary with
Game Type chosen) simultaneously to clea” SRAM,
The Juris
ictional Set Chip Version Menu will be displayed.
or aristocrat War Pie
4, Press [Spin Again] (SPIN playbutton) to proceed to the Jurisdi
Menu.
ictional Options
saver)
Samet
Viste tegen
raat int 5
3-18‘Machine Modes
316
Service Manuat
5. After setting the Jurisdiction and making required changes to the configuration
6
items go to the SetChip Main Menu by pressing [Spin Again].
‘Step down to the Money Setup Menu and select the option. The following
Money Setup Menu display will be shown.
(for teatcrr tn et Piers)
(sg) seta
2s
i ae
‘Sent asgustion: 6.05 nae 1 estService Manual
Machine Modes
7. After setting the Money Setup options, press [Spin Again] to return to the
main menu. Step down to the Payout Setup Menu and select the option. The
following Payout Device and Type Menu screen will be displayed.
8
After setting the Payout Setup options, press [Spin Again] to r
menu, Step down to the Playline Setup Menu and select the
Pla
yyine Setup Menu will display.
option - the
jeturn to the mainMachine Modes Service Manual
9. After setting the Playline Setup options, press [Spin Again] to return to the main
menu. Step down to the Miscellaneous Options Menu and select the option
The following screen will be displayed
(fer ariteerat a Matar)
Wscetenns ties Setap em
reese Timer: snaee
1p et acan Fecttnaiey: sie
ia bse heen medics. tetas te min ete so
10. After setting the Miscellaneous Options Men, [Spin Again] to return to the
main menu. Select Save all Options from th main menu. The system will
request the logic door be opened to permit the saving of the new configuration,
11. Open the logic cage door and save the new configuration options.
12, Turn the power OFF and remove the Jurisdictional SetChip flash card from the
logic cage.
13, Install the System and Game flash card.
14, Turn the power ON. The game screen will b2 displayed and the message
MEMORY ERROR ~ GAME EPROM CHANGED will be seen below the game
images.
318