Metasearch 4 Controller
Features
+ Single Board construction
+ Auto-balance
+ Facility to accept the signal from a Bett Splice pickup
+ 220 volt / 110 volt Supply Voltage
+ Ability to operate in either an instantaneous Trigger Mode
or tequire a Reset Signal
+ Fault/Trigger Relay & LED indicator
+ 3 X Trip Relays & LED indicators
+ High / Low 1-100%) range of sensitivity
+ Lockable metal enclosure rated IP65
+ Microprocessor based with the ability for inputs and outputs to be configured
to suit special requirements
+ Solid state user interface with LCD screen.
+ Totaling metal count facility.
Typical Conveyor Installations
Metasearch
Industrial Metal Detection Equipment
Bolt passes through coil Belt passes between 2 coils
Advantages: Most sensitive Advantages: Suitable for large
arrangement and least costly burden depths
No cutting of belt
Disadvantages: Belt requires Easily replaced
cutting and joining by vulcanizing
Coil vulnerable to large rocks Disadvantages: Coils need to be
phased’ correctly
Coil vulnerable to large rocks
Most common form of installation for troughed conveyors
Ease of replacement
items need detecting
Contact Information
Tet 427 11477 4760
Fax: +27 11 477 5789
Exmail: info@saflec com
Advantages: Ease of installation (No cutting of belt)
Disedvantages: Not suitable for large burden depths
Not the most sensitive where small
Coil positioned below the belt
‘Advantages: No cutting of the belt
Coil relatively protected from damage
Easily replaced
Disadvantages: Not suitable for large
burden depths
Not the most sensitive where small
items need detecting.
NOTE:
Saflecis capable of
manufacturing specially
designed coils to suit
customer requirements
stich a8 the wood ehinping
Industry,
Website: www saflec.comMetasearch
Industrial Metal Detection Equipment
Coil Dimensions
UNDERSEARCH CO!
width, —
Height
Length
Coil Dimensions (mm
AEs)
—— rE A
Length
Coil Dimensions (mm
Coil Size Length wieth Height Col Size Length wrath Height
M201 615. 400 150 m20-1 730 300 50.
M202 905 400 175 M202 1230 450 55
M203 1320 400 195 M203 1530 660 65
M204 1850 600 20 20-4 1250 775 65
M205 2320 00 as 205 2300 ‘80 25
Accessories
+ Powder Marker Marking system to indicate where metal is located on the conveyor belt
* Disc Dropper Marking system to indicate where metal is located on the conveyor belt
+ Light Light indication for visual identification of metal detected on belt
+ siren Audible indication for identification of metal detected on belt
+ Bek Splice Detector Allows steel splice clips to pass through the coil with out stopping the conveyor
owder Marker
Contact Information
Tet: +27 11477 4760
Fax: +27 11 477 5789
E-mail: info@saflec com
Website: www.satlec.comIndustrial Metal Detection Information Form
In order for us to quote you correctly on your application please take the time to complete the form below and send
it back to us, any additional information and photos of the conveyer may also be helpful. Please send this form to:
info@saflec.com or fax to (+27)11 477 5789 and a sales representative will get back to you shortly.
Company nam Contact number:
Contact person: Contact e-mail
Date: —
General info
Power supply available? O220vAC OQ IOVvAC
Is the plant portable? OYes ONo
Search coil location? Olnside — QOutside
Control Panel enclosure area? Qinside_ = QOutside
Conveyor framework cover? OF ull OPartial
Detection
‘What is the smallest size metal to be detected (mm|?
What type of material is carried on the belt?
Is the metal you require to detect OFerrous — QNon ferrous
Is the material on the belt ODamp OWet ODy
IF the material on the belt contains metal (e.g. manganese ofe, iron ore etc.) what percentage of metal is in the
product?
Conveyor info
Is the conveyor Otroughed OFlat
Stee! core conveyor OYes ONo
Metal splice clips Ores ONo
A Belt width (when troughed): —__mm
B Burden depth: mm
€ Inner stringer distance: mm
D Outer stringer distance: mm
€ E Trough angle: °
Idler diameter: —_____ mm
Distance between idlers: mm
Belt Speect: mps
D
Accessories
‘OMarking system OBelt splice detector OSiren Alarm light Alarm
Any additional information:
Contact Information
Te 127 11.477 4760 E:mailinfo@safleccom Website: wwwwsaflec.com
Fax: +2711 4775789 < was bs