Daimler Trucks You have to start the process for every control unit, which needs new parameters
Daimler AG Title of presentation / Department / Date 2
For the Entray you choose Special Funktions, and then Retrofit Installations and modifications
Daimler AG Title of presentation / Department / Date 3
Input of the access code (Designation) For example.: „Retrofit7433“ You find the code in the parameter file on this disc!
Attention, example!
Daimler AG Title of presentation / Department / Date 4
Info mask, which tells you the following sequences
Daimler AG Title of presentation / Department / Date 5
Choose the control unit, which needs new parameters
Daimler AG Title of presentation / Department / Date 6
Careful input of every Parameter (MB part number / MB object number), you find in the Excel sheet for the current selected control unit. (Consider the correct order!)
Daimler AG Title of presentation / Department / Date 7
Control-screen to check the control unit and the entered Parameters (MB object number) again
Daimler AG Title of presentation / Department / Date 8
Automatic Execution
Daimler AG Title of presentation / Department / Date 9
You have to save the old parameter-data on the hard drive or USB-stick
Daimler AG Title of presentation / Department / Date 10
Feed back of the save-process
Daimler AG Title of presentation / Department / Date 11
Automatic writing of the parameters in the control unit and back documentation in VeDoc
Daimler AG Title of presentation / Department / Date 12
After the succesful parameterization you get the Message
Daimler AG Title of presentation / Department / Date 13